U-Boot 2013.01.01 (Dec 12 2016 - 10:16:28) Critical Link MitySOM-5CSx CPU : Altera SOCFPGA Platform BOARD : Critical Link MitySOM-5CSx Module I2C: ready DRAM: 1 GiB MMC: ALTERA DWMMC: 0 In: serial Out: serial Err: serial Net: mii0 preboot reading MMC uBoot ENV data ** File not found /etc/uBootStatic.env ** ## Warning: Input data exceeds 1048576 bytes - truncated ## Info: input data size = 1048578 = 0x100002 ERROR: Environment import failed: errno = 12 at cmd_nvedit.c:1004/do_env_import() ** File not found /etc/uBoot.env ** ## Warning: Input data exceeds 1048576 bytes - truncated ## Info: input data size = 1048578 = 0x100002 ERROR: Environment import failed: errno = 12 at cmd_nvedit.c:1004/do_env_import() ...done Hit any key to stop autoboot: 0 gpio: pin 28 (bank/mask = 0/0x10000000) gpio: pin 28 (gpio 28) value is 0 gpio: pin 28 (bank/mask = 0/0x10000000) gpio: pin 28 (gpio 28) value is 1 gpio: pin 0 (bank/mask = 0/0x00000001) gpio: pin 0 (gpio 0) value is 1 gpio: pin 9 (bank/mask = 0/0x00000200) gpio: pin 9 (gpio 9) value is 0 gpio: pin 9 (bank/mask = 0/0x00000200) gpio: pin 9 (gpio 9) value is 1 1283540 bytes read in 104 ms (11.8 MiB/s) ## Starting application at 0x3FF775C4 ... ## Application terminated, rc = 0x0 3860552 bytes read in 220 ms (16.7 MiB/s) 22521 bytes read in 34 ms (646.5 KiB/s) ## Booting kernel from Legacy Image at 00007fc0 ... Image Name: Linux-3.16.0-g73a206b Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3860488 Bytes = 3.7 MiB Load Address: 00008000 Entry Point: 00008000 ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x00000100 XIP Kernel Image ... OK OK Loading Device Tree to 03ff7000, end 03fff7f8 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Linux version 3.16.0-g73a206b (brian@ubuntu) (gcc version 4.8.3 20140401 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04) ) #1 SMP Thu Oct 6 12:33:19 CDT 2016 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: MitySOM-5CSX Altera SOCFPGA Cyclone V Memory policy: Data cache writealloc PERCPU: Embedded 8 pages/cpu @9fbd1000 s11008 r8192 d13568 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=512M PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 511312K/524288K available (5803K kernel code, 289K rwdata, 1588K rodata, 406K init, 155K bss, 12976K reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xa0800000 - 0xff000000 (1512 MB) lowmem : 0x80000000 - 0xa0000000 ( 512 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .text : 0x80008000 - 0x807401ac (7393 kB) .init : 0x80741000 - 0x807a6b00 ( 407 kB) .data : 0x807a8000 - 0x807f0788 ( 290 kB) .bss : 0x807f0788 - 0x808176cc ( 156 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:16 nr_irqs:16 16 L2C: platform modifies aux control register: 0x02060000 -> 0x32460000 L2C: platform provided aux values permit register corruption. L2C: DT/platform modifies aux control register: 0x02060000 -> 0x32460000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410030c9, AUX_CTRL 0x76460001 sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949672950ns Console: colour dummy device 80x30 Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok ftrace: allocating 19655 entries in 58 pages CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x53d258 - 0x53d2b0 CPU1: Booted secondary processor CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated. CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 NET: Registered protocol family 16 fpga bridge driver DMA: preallocated 256 KiB pool for atomic coherent allocations hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. altera_hps2fpga_bridge soc:fpgabridge@0: fpga bridge [hps2fpga] registered as device hps2fpga altera_hps2fpga_bridge soc:fpgabridge@0: init-val not specified altera_hps2fpga_bridge soc:fpgabridge@1: fpga bridge [lwhps2fpga] registered as device lwhps2fpga altera_hps2fpga_bridge soc:fpgabridge@1: init-val not specified altera_hps2fpga_bridge soc:fpgabridge@2: fpga bridge [fpga2hps] registered as device fpga2hps altera_hps2fpga_bridge soc:fpgabridge@2: init-val not specified FPGA Mangager framework driver vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered Switched to clocksource timer1 NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP: reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available arm-pmu arm-pmu: PMU:CTI successfully enabled for 2 cores futex hash table entries: 512 (order: 3, 32768 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered ntfs: driver 2.1.30 [Flags: R/W]. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 998 io scheduler noop registered (default) dma-pl330 ffe01000.pdma: Loaded driver for PL330 DMAC-3412784 dma-pl330 ffe01000.pdma: DBUFF-512x8bytes Num_Chans-8 Num_Peri-32 Num_Events-8 Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled console [ttyS0] disabled ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 194, base_baud = 6250000) is a 16550A console [ttyS0] enabled ffc03000.serial1: ttyS1 at MMIO 0xffc03000 (irq = 195, base_baud = 6250000) is a 16550A ttyAL0 at MMIO 0xff200100 (irq = 75, base_baud = 6250000) is a Altera UART ttyAL1 at MMIO 0xff2000e0 (irq = 76, base_baud = 6250000) is a Altera UART ttyAL2 at MMIO 0xff2000c0 (irq = 77, base_baud = 6250000) is a Altera UART ttyAL3 at MMIO 0xff2000a0 (irq = 72, base_baud = 6250000) is a Altera UART ttyAL4 at MMIO 0xff200080 (irq = 73, base_baud = 6250000) is a Altera UART ttyAL5 at MMIO 0xff200060 (irq = 74, base_baud = 6250000) is a Altera UART ttyAL6 at MMIO 0xff200040 (irq = 73, base_baud = 6250000) is a Altera UART ttyAL7 at MMIO 0xff200020 (irq = 74, base_baud = 6250000) is a Altera UART altera_fpga_manager ff706000.fpgamgr: fpga manager [Altera FPGA Manager] registered as minor 0 brd: module loaded at24 0-0050: 2048 byte 24c16 EEPROM, writable, 1 bytes/write cadence-qspi ff705000.spi: DMA NOT enabled cadence-qspi ff705000.spi: master is unqueued, this is deprecated m25p80 spi2.0: n25q128a11 (16384 Kbytes) 6 ofpart partitions found on MTD device spi2.0 Creating 6 MTD partitions on "spi2.0": 0x000000000000-0x000000040000 : "Preloader Image 0-3" 0x000000040000-0x000000050000 : "U-Boot Env" 0x000000050000-0x000000060000 : "DTB" 0x000000060000-0x0000000e0000 : "U-Boot" 0x0000000e0000-0x0000008e0000 : "Kernel" 0x0000008e0000-0x000001000000 : "FPGA" m25p80 spi2.1: unrecognized JEDEC id ffffff cadence-qspi ff705000.spi: Cadence QSPI controller driver CAN device driver interface c_can_platform ffc00000.can: c_can_platform device registered (regs=a08f0000, irq=163) stmmac - user ID: 0x10, Synopsys ID: 0x37 Ring mode enabled DMA HW capability register supported Enhanced/Alternate descriptors Enabled extended descriptors RX Checksum Offload Engine supported (type 2) TX Checksum insertion supported Enable RX Mitigation via HW Watchdog Timer stmmac-mdio ff702000.mdio: mdio@ff702000 libphy: stmmac_mdio: probed dwc2 ffb40000.usb: EPs: 15, dedicated fifos, 8064 entries in SPRAM dwc2 ffb40000.usb: DWC OTG Controller dwc2 ffb40000.usb: new USB bus registered, assigned bus number 1 dwc2 ffb40000.usb: irq 160, io mem 0x00000000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: DWC OTG Controller usb usb1: Manufacturer: Linux 3.16.0-g73a206b dwc2_hsotg usb usb1: SerialNumber: ffb40000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice rtc-ab18xx 0-0069: rtc core: registered ab1803 as rtc0 rtc-ab18xx 0-0069: 192 bytes nvram i2c /dev entries driver lm73 0-004c: sensor 'lm73' Synopsys Designware Multimedia Card Interface Driver dw_mmc ff704000.dwmmc0: no vmmc regulator found: -19 dw_mmc ff704000.dwmmc0: Using internal DMA controller. dw_mmc ff704000.dwmmc0: Version ID is 240a dw_mmc ff704000.dwmmc0: DW MMC controller at irq 171, 32 bit host data width, 1024 deep fifo dw_mmc ff704000.dwmmc0: 1 slots initialized lp5562 0-0030: internal clock used ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: using arm/armv7-ca9 TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered ThumbEE CPU extension supported. Registering SWP/SWPB emulation handler input: soc:gpio_keys as /devices/soc/soc:gpio_keys/input/input0 Waiting for root device /dev/mmcblk0p2... mmc0: BKOPS_EN bit is not set mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 52000000Hz, actual 50000000HZ div = 2) mmc0: new high speed MMC card at address 0001 mmcblk0: mmc0:0001 MMC04G 3.65 GiB mmcblk0boot0: mmc0:0001 MMC04G partition 1 1.00 MiB mmcblk0boot1: mmc0:0001 MMC04G partition 2 1.00 MiB mmcblk0: p1 p2 p3 mmcblk0boot1: unknown partition table mmcblk0boot0: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p2): using internal journal EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:2. devtmpfs: mounted Freeing unused kernel memory: 404K (80741000 - 807a6000) INIT: version 2.88 booting Error opening /dev/fb0: No such file or directory Starting udev udevd[93]: starting version 182 random: nonblocking pool is initialized Starting Bootlog daemon: bootlogd. Configuring network interfaces... done. Starting rpcbind daemon...done. net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 Starting atd: OK INIT: Entering runlevel: 5 Starting system message bus: dbus. Starting OpenBSD Secure Shell server: sshd done. creating NFS state directory: done NFS daemon support not enabled in kernel Starting system log daemon...0 Starting kernel log daemon...0 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] * Starting Avahi Unicast DNS Configuration Daemon: avahi-dnsconfd [ ok ] Starting Lighttpd Web Server: lighttpd. Starting crond: OK Starting Network Interface Plugging Daemon: eth0. Stopping Bootlog daemon: bootlogd. Poky (Yocto Project Reference Distro) 1.5.4 mitysom-5cse /dev/ttyS0 mitysom-5cse login: stmmaceth ff702000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off