From:	Tim Eastham
Sent:	Tuesday, May 08, 2012 1:58 PM
To:	E Bradford

Hit any key to stop autoboot:  0
U-Boot > loadb 0xc0700000
## Ready for binary (kermit) download to 0xC0700000 at 115200 bps...
## Total Size      = 0x00071544 = 464196 Bytes
## Start Addr      = 0xC0700000
U-Boot > sf probe 0
8192 KiB M25P64 at 0:0 is now current device
U-Boot > sf erase 0x580000 0x80000
U-Boot > sf write 0xC0700000 0x580000 ${filesize}
U-Boot > setenv bootfpga 'sf probe 0; sf read 0xc0700000 0x580000 0x80000; loadf
pga 0xc0700000'
U-Boot > OMAP-L138/AM-1808/AM-1810 initialization passed!
Booting TI User Boot Loader
        UBL Version: 1.65:2.27.1 BuiltFeb  8 2011 12:15:05
        UBL Flashtype: SPI
Starting SPI Memory Copy...
Valid magicnum, 0x55424CBB, found at offset 0x00010000.
   DONE
Jumping to entry point at 0xC1080000.


U-Boot 2009.11-dirty (Apr 04 2012 - 13:01:11)

I2C:   ready
DRAM:  128 MB
NAND:  256 MiB
MMC:   davinci: 0
In:    serial
Out:   serial
Err:   serial
ARM    Clock : 300000000 Hz
DDR    Clock : 150000000 Hz
EMIFA  CLock : 100000000 Hz
DSP    Clock : 300000000 Hz
ASYNC3 Clock : 150000000 Hz
Enet  config : 2
MMC 0 Enable : 0
Resetting ethernet phy
Net:   Ethernet PHY: GENERIC @ 0x03 [0x8]

Hit any key to stop autoboot:  0