U-Boot SPL 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530) DRA752-GP ES2.0 no pinctrl state for default mode ** Unable to read file dra7-ipu1-fw.xem4 ** Firmware loading failed Trying to boot from MMC1 no pinctrl state for default mode Loading Environment from FAT... *** Warning - bad CRC, using default environment Loading Environment from MMC... *** Warning - bad CRC, using default environment U-Boot 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530) CPU : DRA752-GP ES2.0 Model: TI AM5748 IDK Board: MitySOM-57x Dev Kit Non-FPGA DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment Loading Environment from MMC... *** Warning - bad CRC, using default environment MitySOM-57x - Model No: 5728-PX-4AA-RI Serial No: 21005275 Part Number: 80-001446RI-3A Warning: fastboot.board_rev: unknown board revision i2c_write: error waiting for data ACK (status=0x116) cdce9xx_reg_write: failed for addr:5, ret:-121 board_set_pru_ethaddr Net: Could not get PHY for ethernet@48484000: addr 0 Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Unable to read file boot.scr ** ** Unable to read file uEnv.txt ** switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 4461056 bytes read in 196 ms (21.7 MiB/s) 90099 bytes read in 5 ms (17.2 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe7000, end 8ffffff2 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.94-yocto-standard (oe-user@oe-host) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architectu4 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Critical Link MitySOM-AM57x [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 128 MiB at 0x00000000f6c00000 [ 0.000000] OMAP4: Map 0x00000000fed00000 to (ptrval) for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] random: get_random_bytes called from start_kernel+0xb4/0x470 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s32396 r8192 d20852 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 460096 [ 0.000000] Kernel command line: console=ttyS2,115200n8 cma=128MB drm.edid_firmware=edid/1920x1080.bin video=HDMI-A-1:1920x1080 rt [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1550312K/1847296K available (10240K kernel code, 336K rwdata, 2820K rodata, 2048K init, 272K bss, 34840K rese) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 337 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 273 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000019] Switching to timer-based delay loop, resolution 162ns [ 0.000295] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000305] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000764] Console: colour dummy device 80x30 [ 0.000808] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000824] pid_max: default: 32768 minimum: 301 [ 0.000945] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000960] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001516] CPU: Testing write buffer coherency: ok [ 0.001550] CPU0: Spectre v2: using ICIALLU workaround [ 0.001762] /cpus/cpu@0 missing clock-frequency property [ 0.001781] /cpus/cpu@1 missing clock-frequency property [ 0.001795] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.059918] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.079929] rcu: Hierarchical SRCU implementation. [ 0.100121] EFI services will not be available. [ 0.119992] smp: Bringing up secondary CPUs ... [ 0.200379] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.200385] CPU1: Spectre v2: using ICIALLU workaround [ 0.200509] smp: Brought up 1 node, 2 CPUs [ 0.200521] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.200529] CPU: All CPU(s) started in HYP mode. [ 0.200537] CPU: Virtualization extensions available. [ 0.201102] devtmpfs: initialized [ 0.218313] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.218565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.218583] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.222875] pinctrl core: initialized pinctrl subsystem [ 0.223395] DMI not present or invalid. [ 0.223669] NET: Registered protocol family 16 [ 0.224867] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.225781] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.418487] cpuidle: using governor ladder [ 0.418521] cpuidle: using governor menu [ 0.428590] OMAP GPIO hardware version 0.1 [ 0.453994] No ATAGs? [ 0.454068] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.454084] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.454924] OMAP DMA hardware revision 0.0 [ 0.466668] edma 43300000.edma: memcpy is disabled [ 0.470079] edma 43300000.edma: TI EDMA DMA engine driver [ 0.477282] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.563143] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.563330] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.563575] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.563809] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.564189] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.564369] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.564652] iommu: Adding device 58820000.ipu to group 1 [ 0.564731] iommu: Adding device 55020000.ipu to group 2 [ 0.564857] iommu: Adding device 40800000.dsp to group 0 [ 0.565081] iommu: Adding device 41000000.dsp to group 3 [ 0.566325] SCSI subsystem initialized [ 0.567367] palmas 0-0058: Irq flag is 0x00000008 [ 0.593533] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.595169] SMPS12: supplied by regulator-dummy [ 0.596790] SMPS3: supplied by VMAIN [ 0.598282] SMPS45: supplied by regulator-dummy [ 0.600013] SMPS6: supplied by VMAIN [ 0.601618] SMPS7: supplied by VMAIN [ 0.603360] SMPS8: supplied by VMAIN [ 0.604793] random: fast init done [ 0.604977] SMPS9: supplied by VMAIN [ 0.605885] LDO1: supplied by VMAIN [ 0.621225] LDO2: supplied by VMAIN [ 0.631231] LDO3: supplied by VMAIN [ 0.641241] LDO4: supplied by VMAIN [ 0.641900] LDO5: supplied by regulator-dummy [ 0.642569] LDO6: supplied by regulator-dummy [ 0.643233] LDO7: supplied by regulator-dummy [ 0.643894] LDO8: supplied by regulator-dummy [ 0.644554] LDO9: supplied by VMAIN [ 0.651556] LDOLN: supplied by VMAIN [ 0.661276] LDOUSB: supplied by VMAIN [ 0.673753] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.674682] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 0.674884] media: Linux media interface: v0.10 [ 0.674924] videodev: Linux video capture interface: v2.00 [ 0.675003] pps_core: LinuxPPS API ver. 1 registered [ 0.675012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.675033] PTP clock support registered [ 0.675062] EDAC MC: Ver: 3.0.0 [ 0.675836] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.676089] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.680888] Advanced Linux Sound Architecture Driver Initialized. [ 0.681709] clocksource: Switched to clocksource arch_sys_counter [ 0.689884] NET: Registered protocol family 2 [ 0.690471] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.690501] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.690564] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.690690] TCP: Hash tables configured (established 8192 bind 8192) [ 0.690916] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.690952] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.691085] NET: Registered protocol family 1 [ 0.711518] RPC: Registered named UNIX socket transport module. [ 0.711529] RPC: Registered udp transport module. [ 0.711537] RPC: Registered tcp transport module. [ 0.711545] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.712650] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.712845] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.713833] Initialise system trusted keyrings [ 0.713962] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.719021] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.729518] NFS: Registering the id_resolver key type [ 0.729542] Key type id_resolver registered [ 0.729552] Key type id_legacy registered [ 0.729593] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.731268] Key type asymmetric registered [ 0.731281] Asymmetric key parser 'x509' registered [ 0.731329] bounce: pool size: 64 pages [ 0.731362] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.731373] io scheduler noop registered [ 0.731382] io scheduler deadline registered [ 0.731481] io scheduler cfq registered (default) [ 0.731491] io scheduler mq-deadline registered [ 0.731501] io scheduler kyber registered [ 0.737324] pinctrl-single 4a003400.pinmux: 282 pins, size 1128 [ 0.744751] V3_3D: supplied by smps9 [ 0.744988] aic_dvdd: supplied by V3_3D [ 0.745051] vtt_fixed: supplied by V3_3D [ 0.791562] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.795118] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 43, base_baud = 3000000) is a 8250 [ 0.796063] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 44, base_baud = 3000000) is a 8250 [ 1.774715] console [ttyS2] enabled [ 1.779142] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 45, base_baud = 3000000) is a 8250 [ 1.790040] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 1.790591] random: crng init done [ 1.799866] omapdss_dss 58000000.dss: Linked as a consumer to regulator.22 [ 1.806916] DSS: OMAP DSS rev 6.1 [ 1.813253] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15 [ 1.820760] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15 [ 1.841105] brd: module loaded [ 1.850462] loop: module loaded [ 1.859408] m25p80 spi0.0: found n25q256ax1, expected s25fl256s1 [ 1.865754] m25p80 spi0.0: n25q256ax1 (32768 Kbytes) [ 1.870809] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.877235] Creating 7 MTD partitions on "spi0.0": [ 1.882074] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.887953] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.894103] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.900808] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.907289] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.914481] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.920569] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.927762] libphy: Fixed MDIO Bus: probed [ 1.935122] i2c /dev entries driver [ 1.941784] gpio-fan gpio_fan: GPIO fan initialized [ 1.975447] cpu cpu0: Linked as a consumer to regulator.6 [ 1.980954] cpu cpu0: Linked as a consumer to regulator.29 [ 1.988124] sdhci: Secure Digital Host Controller Interface driver [ 1.994404] sdhci: Copyright(c) Pierre Ossman [ 1.999928] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.006271] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 2.015125] sdhci-omap 4809c000.mmc: Got CD GPIO [ 2.019925] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.28 [ 2.026967] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13 [ 2.034123] sdhci-omap 4809c000.mmc: Dropping the link to regulator.13 [ 2.040728] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.2 [ 2.047678] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13 [ 2.054859] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode [ 2.087324] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA [ 2.094863] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2 [ 2.101660] sdhci-omap 480b4000.mmc: Dropping the link to regulator.2 [ 2.108232] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2 [ 2.115150] sdhci-omap 480b4000.mmc: Cannot get pinctrl [ 2.122328] ledtrig-cpu: registered to indicate activity on CPUs [ 2.130858] ad799x 4-0029: Linked as a consumer to regulator.2 [ 2.136828] ad799x 4-0029: 4-0029 supply vref not found, using dummy regulator [ 2.144187] ad799x 4-0029: Linked as a consumer to regulator.0 [ 2.152448] NET: Registered protocol family 10 [ 2.157417] Segment Routing with IPv6 [ 2.161132] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.167621] NET: Registered protocol family 17 [ 2.172368] Key type dns_resolver registered [ 2.176881] Registering SWP/SWPB emulation handler [ 2.181769] omap_voltage_late_init: Voltage driver support not added [ 2.188206] Power Management for TI OMAP4+ devices. [ 2.193739] Loading compiled-in X.509 certificates [ 2.202683] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.212896] mmc0: new high speed SDHC card at address 59b4 [ 2.219567] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.226863] dmm 4e000000.dmm: initialized all PAT entries [ 2.229057] mmcblk0: mmc0:59b4 EB2MW 29.8 GiB [ 2.233324] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15 [ 2.244276] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15 [ 2.252719] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15 [ 2.260540] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 2.268591] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 2.276696] mmcblk0: p1 p2 [ 2.277482] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.286197] [drm] No driver support for vblank timestamp query. [ 2.433607] [drm] Enabling DMM ywrap scrolling [ 2.451352] Console: switching to colour frame buffer device 240x67 [ 2.469803] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 2.476948] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0 [ 2.484556] hctosys: unable to open rtc device (rtc0) [ 2.490169] ALSA device list: [ 2.493177] No soundcards found. [ 2.847298] EXT4-fs (mmcblk0p2): recovery complete [ 2.864033] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.872337] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.879766] devtmpfs: mounted [ 2.883871] Freeing unused kernel memory: 2048K [ 2.888551] Run /sbin/init as init process [ 3.244960] systemd[1]: System time before build time, advancing clock. [ 3.276276] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPT) [ 3.298432] systemd[1]: Detected architecture arm. Welcome to Arago 2019.11! [ 3.332782] systemd[1]: Set hostname to . [ 3.565526] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but t. [ 3.582731] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP ) [ 3.862785] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.908211] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 3.942060] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 3.982214] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.012357] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. Mounting Kernel Debug File System... [ OK ] Created slice system-getty.slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on Journal Socket (/dev/log). Mounting POSIX Message Queue File System... [ OK ] Created slice User and Session Slice. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. Starting Load Kernel Modules... [ OK ] Listening on Network Service Netlink Socket. [ 4.356836] cmemk: loading out-of-tree module taints kernel. [ OK ] Listening on udev Kernel Socket. [ 4.364476] CMEMK module: reference Linux version 4.19.94 [ 4.374383] allocated heap buffer 0x40500000 of size 0x100000 [ 4.380209] cmemk initialized [[ 4.392518] cryptodev: driver 1.9 loaded. OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... Starting Journal Service... [ OK ] Reached target Swap. [ OK ] Reached target Slices. Starting Remount Root and Kernel File Systems... [ 4.584215] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Temporary Directory (/tmp)... [ OK ] Started Journal Service. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted Temporary Directory (/tmp). Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Kernel Configuration File System. [ 5.070290] systemd-journald[99]: Received request to flush runtime journal from PID 1 [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... [ OK ] Reached target Containers. Mounting /var/volatile... Starting udev Kernel Device Manager... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Mounted /media/ram. [ OK ] Started udev Coldplug all Devices. [ OK ] Started udev Kernel Device Manager. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. [ 5.535341] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver Starting Update UTMP about System Boot/Shutdown... [ 5.564882] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver Starting Network Service... [ 5.598122] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000 Starting Network Time Synchronization... [ 5.635586] remoteproc remoteproc0: 58820000.ipu is available [ 5.671269] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver [ 5.732340] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver [[ 5.752740] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000 OK ] Found device /dev/ttyS2. [ 5.760908] remoteproc remoteproc1: 55020000.ipu is available [ OK ] Started Update UTMP about System Boot/Shutdown. [ 5.812980] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver [ 5.828196] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver [ 5.852208] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000 [ 5.865983] remoteproc remoteproc2: 40800000.dsp is available [ 5.879442] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver [ 5.888282] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver [ 5.914655] omap-rproc 41000000.dsp: assigned reserved memory node dsp2-memory@9f000000 [ 5.930647] remoteproc remoteproc3: 41000000.dsp is available [ 6.196737] remoteproc remoteproc0: powering up 58820000.ipu [ 6.202500] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 6916676 [ 6.214581] virtio_rpmsg_bus virtio0: rpmsg host is online [ 6.220826] remoteproc remoteproc0: registered virtio0 (type 7) [ 6.231764] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 6.678803] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659038@58:tps659038_rtc as r0 [ 6.691694] omap_gpio 48051000.gpio: Could not set line 25 debounce to 20000 microseconds (-22) [ 6.800968] remoteproc remoteproc1: powering up 55020000.ipu [ 6.806750] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 4854132 [ OK ] Started Network Time Synchronization. [ 6.815349] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ OK ] Reached target System Initialization. [ 6.832121] omap_rtc 48838000.rtc: registered as rtc1 [ 6.837838] Driver for 1-wire Dallas network protocol. [ 6.872341] virtio_rpmsg_bus virtio1: rpmsg host is online [ 6.873728] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32 [ 6.877904] remoteproc remoteproc1: registered virtio1 (type 7) [ 6.893188] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 6.898671] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33 [ 6.911684] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c [ 6.922742] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 6.953781] at24 0-0050: 4096 byte 24c32 EEPROM, read-only, 0 bytes/write [ 6.975017] at24 4-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write [ 7.151766] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode [ 7.195124] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.3 [ 7.204700] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 7.204736] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.2 [ 7.217355] omap-des 480a5000.des: will run requests pump with realtime priority [ 7.372402] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d [ 7.384716] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered. [ 7.429065] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 7.439051] phy phy-4a084000.phy.3: Linked as a consumer to regulator.23 [ 7.449653] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 7.456625] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 7.462474] phy phy-4a085000.phy.4: Linked as a consumer to regulator.23 [ 7.463426] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 7.483479] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 7.493672] omap-aes 4b700000.aes: will run requests pump with realtime priority [ OK ] Listening on D-Bus System Message Bus Socket. Starting Reboot and dump vmcore via kexec... [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ 7.784272] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ OK ] Listening on dropbear.socket. [ 7.901883] vpe 489d0000.vpe: Device registered as /dev/video0 [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Print notice about GPLv3 packages... Starting TI IPC Daemon... Starting RPC Bind Service... Starting Login Service... [ 8.118685] ahci 4a140000.sata: controller can't do 64bit DMA, forcing 32bit [ 8.126121] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 8.132235] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1 Starting rc.pvr.service... [ 8.144279] omap-hdmi-audio omap-hdmi-audio.0.auto: ASoC: no DMI vendor name! [ OK ] Started D-Bus System Message Bus. [ 8.167379] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 8.176963] ahci 4a140000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 8.200990] scsi host0: ahci [ 8.204423] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 82 [ OK ] Started Periodic Command Scheduler. [ OK ] Started Job spooling tools. [ 8.239091] omap_gpio 48051000.gpio: Could not set line 24 debounce to 20000 microseconds (-22) Starting TI MultiCore Tools Daemon... [ OK ] Reached target System Time Synchronized. [ 8.265876] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 1 [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Started Network Service. [ OK ] Started Reboot and dump vmcore via kexec. Starting Network Name Resolution... Starting Wait for Network to be Configured... [ 8.542391] ata1: SATA link down (SStatus 0 SControl 300) [ 8.603200] remoteproc remoteproc2: powering up 40800000.dsp [ 8.608901] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 20573520 [ 8.617148] remoteproc remoteproc3: powering up 41000000.dsp [ 8.622940] remoteproc remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 20573520 [ 8.650809] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 8.656746] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 8.663251] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 8.669139] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 8.734915] asoc-simple-card sound0: tlv320aic3x-hifi <-> 4847c000.mcasp mapping ok [ 8.770079] asoc-simple-card sound0: ASoC: no DMI vendor name! [ 8.792166] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 8.807445] libphy: 4b2b2400.mdio: probed [ 8.819376] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] [ 8.836577] virtio_rpmsg_bus virtio2: rpmsg host is online [ 8.837368] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 8.870953] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver unknown [ 8.887815] remoteproc remoteproc3: registered virtio2 (type 7) [ 8.893182] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver unknown [ 8.901168] remoteproc remoteproc3: remote processor 41000000.dsp is now up [ 8.916270] virtio_rpmsg_bus virtio3: rpmsg host is online [ 8.916657] virtio_rpmsg_bus virtio3: creating channel rpmsg-proto addr 0x3d [ 8.933941] remoteproc remoteproc2: registered virtio3 (type 7) [ 8.940146] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 8.966774] remoteproc remoteproc4: 4b234000.pru is available [ 8.981873] pru-rproc 4b234000.pru: PRU rproc node pru@4b234000 probed successfully [ 9.042479] remoteproc remoteproc5: 4b238000.pru is available [ 9.052717] pru-rproc 4b238000.pru: PRU rproc node pru@4b238000 probed successfully [ 9.102871] remoteproc remoteproc6: 4b2b4000.pru is available [ 9.168603] pru-rproc 4b2b4000.pru: PRU rproc node pru@4b2b4000 probed successfully [ OK ] Started Login Service. [ 9.200216] remoteproc remoteproc7: 4b2b8000.pru is available [ OK ] Started Network Name Resolution. [ OK ] Started TI IPC Daemon. [ OK ] Started RPC Bind Service. [ OK ] Started rc.pvr.service. [ OK ] Started TI MultiCore Tools Daemon. [ 9.235980] pru-rproc 4b2b8000.pru: PRU rproc node pru@4b2b8000 probed successfully [ 9.305070] prueth pruss2_eth: port 2: using random MAC addr: b6:c0:64:9a:42:8a [ 9.347866] prueth pruss2_eth: pruss_fw_drop_untagged_vlan 0 [ 9.396309] prueth pruss2_eth: pruss MC Mask (Port 0) ff:ff:ff:ff:ff:ff [ 9.440917] prueth pruss2_eth: pruss MC Mask (Port 1) ff:ff:ff:ff:ff:ff [ 9.480384] prueth pruss2_eth: TI PRU ethernet (type 0) driver initialized [ 10.483636] dwc3 48890000.usb: Failed to get clk 'ref': -2 [ 10.501057] dwc3 488d0000.usb: Failed to get clk 'ref': -2 [ 10.507006] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: probing service rpc_example_1 with src 1024 dst 101 [ 10.508486] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: published functions = 8 [ 10.701664] NET: Registered protocol family 45 [ 10.741314] usbcore: registered new interface driver usbfs [ 10.771973] usbcore: registered new interface driver hub [ 10.786517] usbcore: registered new device driver usb [ 10.822707] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.834287] iep ptp bc clkid -1 [ 10.837586] remoteproc remoteproc6: powering up 4b2b4000.pru [ 10.846868] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 10.864158] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 10.873932] xhci-hcd xhci-hcd.1.auto: irq 175, io mem 0x48890000 [ 10.880474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 10.890252] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.897805] usb usb1: Product: xHCI Host Controller [ 10.903079] usb usb1: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd [ 10.910458] usb usb1: SerialNumber: xhci-hcd.1.auto [ 10.915782] remoteproc remoteproc6: Booting fw image ti-pruss/am57xx-pru0-prueth-fw.elf, size 7228 [ 10.927156] hub 1-0:1.0: USB hub found [ 10.931917] pruss 4b280000.pruss: configured system_events[63-0] = 00000600,04500000 [ 10.940833] hub 1-0:1.0: 1 port detected [ 10.947922] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.954827] pruss 4b280000.pruss: configured intr_channels = 0x000000d5 host_intr = 0x00000155 [ 10.964430] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 10.979181] remoteproc remoteproc6: remote processor 4b2b4000.pru is now up [ 10.987157] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 10.994690] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 11.003434] net eth0: started [ 11.007023] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.014354] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 11.025523] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.033344] usb usb2: Product: xHCI Host Controller [ 11.038542] usb usb2: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd [ 11.046093] usb usb2: SerialNumber: xhci-hcd.1.auto [ 11.057641] remoteproc remoteproc7: powering up 4b2b8000.pru [ 11.064166] hub 2-0:1.0: USB hub found [ 11.068279] hub 2-0:1.0: 1 port detected [ 11.075790] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 11.081319] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 11.091270] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 11.101694] xhci-hcd xhci-hcd.2.auto: irq 192, io mem 0x488d0000 [ 11.108494] remoteproc remoteproc7: Booting fw image ti-pruss/am57xx-pru1-prueth-fw.elf, size 7256 [ 11.118037] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 11.127627] pruss 4b280000.pruss: configured system_events[63-0] = 00600000,08a00000 [ 11.137477] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.137755] pruss 4b280000.pruss: configured intr_channels = 0x0000032a host_intr = 0x000002aa [ 11.152670] usb usb3: Product: xHCI Host Controller [ 11.158323] usb usb3: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd [ 11.159507] remoteproc remoteproc7: remote processor 4b2b8000.pru is now up [ 11.179043] net eth1: started [ 11.182160] usb usb3: SerialNumber: xhci-hcd.2.auto [ 11.183941] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.192567] hub 3-0:1.0: USB hub found [ 11.200185] hub 3-0:1.0: 1 port detected [ 11.206414] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 11.212523] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 11.220222] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 11.228541] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 11.237141] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 11.245799] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.253964] usb usb4: Product: xHCI Host Controller [ 11.258866] usb usb4: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd [ 11.269673] usb usb4: SerialNumber: xhci-hcd.2.auto [ 11.280799] hub 4-0:1.0: USB hub found [ 11.286204] hub 4-0:1.0: 1 port detected *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash bc binutils-dev binutils bison-dev bison cifs-utils cpio cpp-symlinks cpp dosfstools elfutils-dev elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbc6x gdbserver gettext glmark2 gstreamer1.0-libav gzip hidapi libasm1 libbfd libcairo-perf-utils libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmpc3 libmpfr6 libreadline-dev libreadline7 libunistring2 m4-dev m4 make nettle parted pdm-anomaly-detection rsync swig-dev swig which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. Starting Save/Restore Sound Card State... [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Created slice system-systemd\x2dfsck.slice. Starting File System Check on /dev/mmcblk0p1... Starting weston.service... [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target Network. Starting Permit User Sessions... Starting Enable and configure wl18xx bluetooth stack... Starting Simple Network Management Protocol (SNMP) Daemon.... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Permit User Sessions. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ OK ] Reached target Sound Card. [ OK ] Started Synchronize System and HW clocks. [ OK ] Started File System Check on /dev/mmcblk0p1. Mounting /run/media/mmcblk0p1... [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Mounted /run/media/mmcblk0p1. [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Started weston.service. Starting telnetd.service... Starting Matrix GUI... [ OK ] Started telnetd.service. [ OK ] Started Matrix GUI. Starting thttpd.service... [ OK ] Started thttpd.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org mitysom-am57x ttyS2 Arago 2019.11 mitysom-am57x ttyS2 mitysom-am57x login: [ 33.121758] aic_dvdd: disabling CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0