U-Boot SPL 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530) DRA752-GP ES2.0 no pinctrl state for default mode ** Unable to read file dra7-ipu1-fw.xem4 ** Firmware loading failed Trying to boot from MMC1 no pinctrl state for default mode Loading Environment from FAT... *** Warning - bad CRC, using default environment Loading Environment from MMC... *** Warning - bad CRC, using default environment U-Boot 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530) CPU : DRA752-GP ES2.0 Model: TI AM5748 IDK Board: MitySOM-57x Dev Kit Non-FPGA DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment Loading Environment from MMC... *** Warning - bad CRC, using default environment MitySOM-57x - Model No: 5728-PX-4AA-RI Serial No: 21005275 Part Number: 80-001446RI-3A Warning: fastboot.board_rev: unknown board revision i2c_write: error waiting for data ACK (status=0x116) cdce9xx_reg_write: failed for addr:5, ret:-121 board_set_pru_ethaddr Net: Could not get PHY for ethernet@48484000: addr 0 Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 2  1  0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Unable to read file boot.scr ** ** Unable to read file uEnv.txt ** switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 4461056 bytes read in 195 ms (21.8 MiB/s) 90099 bytes read in 6 ms (14.3 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe7000, end 8ffffff2 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.94-yocto-standard (oe-user@oe-host) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP PREEMPT Fri Oct 4 09:03:12 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Critical Link MitySOM-AM57x [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 128 MiB at 0x00000000f6c00000 [ 0.000000] OMAP4: Map 0x00000000fed00000 to (ptrval) for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] random: get_random_bytes called from start_kernel+0xb4/0x470 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s32396 r8192 d20852 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 460096 [ 0.000000] Kernel command line: console=ttyS2,115200n8 cma=128MB drm.edid_firmware=edid/1920x1080.bin video=HDMI-A-1:1920x1080 root=PARTUUID=dc4f364e-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1550312K/1847296K available (10240K kernel code, 336K rwdata, 2820K rodata, 2048K init, 272K bss, 34840K reserved, 262144K cma-reserved, 1160192K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 337 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 273 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000018] Switching to timer-based delay loop, resolution 162ns [ 0.000293] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000303] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000761] Console: colour dummy device 80x30 [ 0.000803] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000819] pid_max: default: 32768 minimum: 301 [ 0.000939] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000954] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001510] CPU: Testing write buffer coherency: ok [ 0.001546] CPU0: Spectre v2: using ICIALLU workaround [ 0.001760] /cpus/cpu@0 missing clock-frequency property [ 0.001781] /cpus/cpu@1 missing clock-frequency property [ 0.001793] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.059920] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.079929] rcu: Hierarchical SRCU implementation. [ 0.100124] EFI services will not be available. [ 0.119991] smp: Bringing up secondary CPUs ... [ 0.200373] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.200379] CPU1: Spectre v2: using ICIALLU workaround [ 0.200501] smp: Brought up 1 node, 2 CPUs [ 0.200513] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.200522] CPU: All CPU(s) started in HYP mode. [ 0.200530] CPU: Virtualization extensions available. [ 0.201087] devtmpfs: initialized [ 0.218423] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.218677] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.218694] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.222979] pinctrl core: initialized pinctrl subsystem [ 0.223507] DMI not present or invalid. [ 0.223783] NET: Registered protocol family 16 [ 0.224994] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.225910] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.418604] cpuidle: using governor ladder [ 0.418639] cpuidle: using governor menu [ 0.428699] OMAP GPIO hardware version 0.1 [ 0.454089] No ATAGs? [ 0.454161] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.454176] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.455012] OMAP DMA hardware revision 0.0 [ 0.466680] edma 43300000.edma: memcpy is disabled [ 0.470095] edma 43300000.edma: TI EDMA DMA engine driver [ 0.477261] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.563112] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.563296] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.563540] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.563773] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.564152] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.564330] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.564611] iommu: Adding device 58820000.ipu to group 1 [ 0.564692] iommu: Adding device 55020000.ipu to group 2 [ 0.564817] iommu: Adding device 40800000.dsp to group 0 [ 0.565041] iommu: Adding device 41000000.dsp to group 3 [ 0.566281] SCSI subsystem initialized [ 0.567318] palmas 0-0058: Irq flag is 0x00000008 [ 0.592281] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.593936] SMPS12: supplied by regulator-dummy [ 0.595592] SMPS3: supplied by VMAIN [ 0.597155] SMPS45: supplied by regulator-dummy [ 0.598948] SMPS6: supplied by VMAIN [ 0.600640] SMPS7: supplied by VMAIN [ 0.602440] SMPS8: supplied by VMAIN [ 0.604093] SMPS9: supplied by VMAIN [ 0.605035] LDO1: supplied by VMAIN [ 0.611019] random: fast init done [ 0.611244] LDO2: supplied by VMAIN [ 0.621243] LDO3: supplied by VMAIN [ 0.631265] LDO4: supplied by VMAIN [ 0.631955] LDO5: supplied by regulator-dummy [ 0.632640] LDO6: supplied by regulator-dummy [ 0.633324] LDO7: supplied by regulator-dummy [ 0.634016] LDO8: supplied by regulator-dummy [ 0.634689] LDO9: supplied by VMAIN [ 0.641591] LDOLN: supplied by VMAIN [ 0.651302] LDOUSB: supplied by VMAIN [ 0.663695] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.664612] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 0.664827] media: Linux media interface: v0.10 [ 0.664866] videodev: Linux video capture interface: v2.00 [ 0.664940] pps_core: LinuxPPS API ver. 1 registered [ 0.664950] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.664971] PTP clock support registered [ 0.665002] EDAC MC: Ver: 3.0.0 [ 0.671326] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.671576] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.672080] Advanced Linux Sound Architecture Driver Initialized. [ 0.672897] clocksource: Switched to clocksource arch_sys_counter [ 0.680956] NET: Registered protocol family 2 [ 0.681528] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.681558] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.681622] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.681749] TCP: Hash tables configured (established 8192 bind 8192) [ 0.681821] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.681855] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.681985] NET: Registered protocol family 1 [ 0.682413] RPC: Registered named UNIX socket transport module. [ 0.682425] RPC: Registered udp transport module. [ 0.682433] RPC: Registered tcp transport module. [ 0.682442] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.683544] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.683730] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.684725] Initialise system trusted keyrings [ 0.684853] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.689961] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.690416] NFS: Registering the id_resolver key type [ 0.690436] Key type id_resolver registered [ 0.690446] Key type id_legacy registered [ 0.690488] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.692203] Key type asymmetric registered [ 0.692216] Asymmetric key parser 'x509' registered [ 0.692263] bounce: pool size: 64 pages [ 0.692297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.692308] io scheduler noop registered [ 0.692317] io scheduler deadline registered [ 0.692417] io scheduler cfq registered (default) [ 0.692428] io scheduler mq-deadline registered [ 0.692438] io scheduler kyber registered [ 0.698232] pinctrl-single 4a003400.pinmux: 282 pins, size 1128 [ 0.705663] V3_3D: supplied by smps9 [ 0.705893] aic_dvdd: supplied by V3_3D [ 0.705955] vtt_fixed: supplied by V3_3D [ 0.750345] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.753866] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 43, base_baud = 3000000) is a 8250 [ 0.754813] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 44, base_baud = 3000000) is a 8250 [ 1.733495] console [ttyS2] enabled [ 1.737899] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 45, base_baud = 3000000) is a 8250 [ 1.748783] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 1.749319] random: crng init done [ 1.755870] omapdss_dss 58000000.dss: Linked as a consumer to regulator.22 [ 1.765478] DSS: OMAP DSS rev 6.1 [ 1.771760] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15 [ 1.779297] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15 [ 1.799644] brd: module loaded [ 1.809031] loop: module loaded [ 1.817944] m25p80 spi0.0: found n25q256ax1, expected s25fl256s1 [ 1.824351] m25p80 spi0.0: n25q256ax1 (32768 Kbytes) [ 1.829410] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.835829] Creating 7 MTD partitions on "spi0.0": [ 1.840646] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.846535] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.852644] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.859367] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.865830] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.872997] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.879083] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.886231] libphy: Fixed MDIO Bus: probed [ 1.893576] i2c /dev entries driver [ 1.900220] gpio-fan gpio_fan: GPIO fan initialized [ 1.936680] cpu cpu0: Linked as a consumer to regulator.6 [ 1.942180] cpu cpu0: Linked as a consumer to regulator.29 [ 1.949345] sdhci: Secure Digital Host Controller Interface driver [ 1.955648] sdhci: Copyright(c) Pierre Ossman [ 1.961357] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.967709] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 1.976563] sdhci-omap 4809c000.mmc: Got CD GPIO [ 1.981368] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.28 [ 1.988409] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13 [ 1.995574] sdhci-omap 4809c000.mmc: Dropping the link to regulator.13 [ 2.002182] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.2 [ 2.009133] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13 [ 2.016323] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode [ 2.048820] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA [ 2.056508] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2 [ 2.063327] sdhci-omap 480b4000.mmc: Dropping the link to regulator.2 [ 2.069881] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2 [ 2.076884] sdhci-omap 480b4000.mmc: Cannot get pinctrl [ 2.083142] ledtrig-cpu: registered to indicate activity on CPUs [ 2.091507] ad799x 4-0029: Linked as a consumer to regulator.2 [ 2.097425] ad799x 4-0029: 4-0029 supply vref not found, using dummy regulator [ 2.104727] ad799x 4-0029: Linked as a consumer to regulator.0 [ 2.105120] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.120799] mmc0: new high speed SDHC card at address 59b4 [ 2.120854] NET: Registered protocol family 10 [ 2.136904] mmcblk0: mmc0:59b4 EB2MW 29.8 GiB [ 2.141517] Segment Routing with IPv6 [ 2.145277] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.151638] NET: Registered protocol family 17 [ 2.152800] mmcblk0: p1 p2 [ 2.156371] Key type dns_resolver registered [ 2.163436] Registering SWP/SWPB emulation handler [ 2.168265] omap_voltage_late_init: Voltage driver support not added [ 2.174683] Power Management for TI OMAP4+ devices. [ 2.180418] Loading compiled-in X.509 certificates [ 2.202965] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.210209] dmm 4e000000.dmm: initialized all PAT entries [ 2.216569] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15 [ 2.224080] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15 [ 2.232380] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15 [ 2.240146] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 2.248151] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 2.256896] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.263557] [drm] No driver support for vblank timestamp query. [ 2.269518] [drm] Cannot find any crtc or sizes [ 2.274796] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0 [ 2.282345] hctosys: unable to open rtc device (rtc0) [ 2.287976] ALSA device list: [ 2.290954] No soundcards found. [ 2.366488] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.374673] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.383199] devtmpfs: mounted [ 2.387061] Freeing unused kernel memory: 2048K [ 2.391705] Run /sbin/init as init process [ 2.749053] systemd[1]: System time before build time, advancing clock. [ 2.780094] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 2.801867] systemd[1]: Detected architecture arm. Welcome to Arago 2019.11! [ 2.843943] systemd[1]: Set hostname to . [ 3.061623] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.078818] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.350357] systemd[1]: Listening on Network Service Netlink Socket. [ 3.356806] [drm] Cannot find any crtc or sizes [ OK ] Listening on Network Service Netlink Socket. [ 3.395762] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 3.423331] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.453565] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.493170] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target Remote File Systems. [ OK ] Listening on Journal Socket. Mounting POSIX Message Queue File System... Starting Load Kernel Modules... Mounting Kernel Debug File System... [ 3.705974] cmemk: loading out-of-tree module taints kernel. [ 3.712717] CMEMK module: reference Linux version 4.19.94 [ 3.718778] allocated heap buffer 0x40500000 of size 0x100000 [ 3.724605] cmemk initialized [ OK ] Listening on udev Control Socket. [ 3.736046] cryptodev: driver 1.9 loaded. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. Starting Remount Root and Kernel File Systems... [ 3.868590] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Starting Journal Service... [ OK ] Reached target Swap. Mounting Temporary Directory (/tmp)... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... [ OK ] Started Journal Service. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Load Kernel Modules. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted Temporary Directory (/tmp). Starting Create Static Device Nodes in /dev... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Apply Kernel Variables. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... [ OK ] Reached target Containers. Mounting /var/volatile... [ OK ] Started udev Kernel Device Manager. [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. [ 4.787254] systemd-journald[102]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ 4.958816] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver [ OK ] Started udev Coldplug all Devices. [ 5.013987] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver [ OK ] Started Create Volatile Files and Directories[ 5.051426] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000 . [ 5.066137] remoteproc remoteproc0: 58820000.ipu is available [ 5.072351] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver Starting Update UTMP about System Boot/Shutdown... [ 5.089242] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver [ 5.102611] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000 Starting Network Service... [ 5.143128] remoteproc remoteproc1: 55020000.ipu is available Starting Network Time Synchronization... [ 5.168663] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver [ 5.177966] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver [ 5.220057] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000 [ 5.283045] remoteproc remoteproc2: 40800000.dsp is available [ 5.294625] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver [ 5.302771] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver [ 5.310891] omap-rproc 41000000.dsp: assigned reserved memory node dsp2-memory@9f000000 [ OK ] Started Update UTMP about System Boot/Shutdow[ 5.331663] remoteproc remoteproc3: 41000000.dsp is available n. [ OK ] Found device /dev/ttyS2. [ 5.588735] remoteproc remoteproc0: powering up 58820000.ipu [ 5.594573] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 6916676 [ 5.610888] virtio_rpmsg_bus virtio0: rpmsg host is online [ 5.620885] remoteproc remoteproc0: registered virtio0 (type 7) [ 5.628387] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 6.024921] remoteproc remoteproc1: powering up 55020000.ipu [ 6.030890] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 4854132 [ 6.038835] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 6.053659] omap_gpio 48051000.gpio: Could not set line 25 debounce to 20000 microseconds (-22) [ 6.075754] virtio_rpmsg_bus virtio1: rpmsg host is online [ 6.086628] remoteproc remoteproc1: registered virtio1 (type 7) [ 6.092579] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 6.104301] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32 [ 6.113298] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33 [ 6.121159] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c [ 6.132353] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 6.180108] Driver for 1-wire Dallas network protocol. [ 6.187803] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659038@58:tps659038_rtc as rtc0 [ 6.297010] omap_rtc 48838000.rtc: registered as rtc1 [ OK ] Started Network Time Synchronization. [ 6.404452] at24 0-0050: 4096 byte 24c32 EEPROM, read-only, 0 bytes/write [ OK ] Reached target System Initialization. [ 6.451400] at24 4-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write [ 6.462937] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ 6.530153] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.3 [ OK ] Listening on RPCbind Server Activation Socket. [ 6.544465] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.2 [ 6.644392] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 6.653605] omap-des 480a5000.des: will run requests pump with realtime priority [ 6.684631] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d [ 6.701151] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered. [ 6.764043] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 6.986474] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 7.004363] phy phy-4a084000.phy.3: Linked as a consumer to regulator.23 [ 7.021118] phy phy-4a085000.phy.4: Linked as a consumer to regulator.23 [ 7.197871] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ OK ] Listening on D-Bus System Message Bus Socket.[ 7.315051] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 7.321671] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 7.329214] vpe 489d0000.vpe: Device registered as /dev/video0 [ 7.335558] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 Starting Reboot and dump vmcore via kexec... [ 7.348320] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 7.547854] ahci 4a140000.sata: controller can't do 64bit DMA, forcing 32bit [ 7.555154] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1 [ 7.560778] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 7.571562] ahci 4a140000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 7.591233] scsi host0: ahci [ 7.595510] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 82 [ OK ] Listening on dropbear.socket. [ 7.661479] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 7.671030] omap-hdmi-audio omap-hdmi-audio.0.auto: ASoC: no DMI vendor name! [ OK ] Reached target Sockets. [ 7.691701] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 1 [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ 7.762870] omap_gpio 48051000.gpio: Could not set line 24 debounce to 20000 microseconds (-22) [ OK ] Started D-Bus System Message Bus. Starting Login Service... Starting TI MultiCore Tools Daemon... [ 7.869706] remoteproc remoteproc2: powering up 40800000.dsp [ 7.876056] remoteproc remoteproc3: powering up 41000000.dsp [ 7.891208] remoteproc remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 20573520 [ 7.902117] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 20573520 Starting RPC Bind Service... [ 7.935094] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ 7.941024] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [ 7.948843] ata1: SATA link down (SStatus 0 SControl 300) [ 7.955838] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 7.961755] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ OK ] Started Periodic Command Scheduler. Starting Print notice about GPLv3 packages... Starting TI IPC Daemon... [ 8.054786] virtio_rpmsg_bus virtio2: rpmsg host is online [ 8.066316] remoteproc remoteproc3: registered virtio2 (type 7) [ 8.072272] remoteproc remoteproc3: remote processor 41000000.dsp is now up Starting rc.pvr.service... [ OK ] Reached target S[ 8.086503] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d ystem Time Synchronized. [ 8.109675] virtio_rpmsg_bus virtio3: rpmsg host is online [ 8.116399] remoteproc remoteproc2: registered virtio3 (type 7) [ 8.124553] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Started Network Service. [ OK ] Started Reboot and dump vmcore via kexec. [ 8.185381] virtio_rpmsg_bus virtio3: creating channel rpmsg-proto addr 0x3d [ 8.295651] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] [ OK ] Started RPC Bind Service. [ OK ] Started TI IPC Daemon. [ 8.342947] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 8.371096] asoc-simple-card sound0: tlv320aic3x-hifi <-> 4847c000.mcasp mapping ok [ 8.392358] libphy: 4b2b2400.mdio: probed [ 8.401569] asoc-simple-card sound0: ASoC: no DMI vendor name! [ 8.485153] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver unknown [ 8.506189] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver unknown [ OK ] Started TI MultiCore Tools Daemon. [ OK ] Started rc.pvr.service. [ 8.617554] remoteproc remoteproc4: 4b234000.pru is available [ 8.678005] pru-rproc 4b234000.pru: PRU rproc node pru@4b234000 probed successfully [ 8.707664] remoteproc remoteproc5: 4b238000.pru is available [ 8.753018] pru-rproc 4b238000.pru: PRU rproc node pru@4b238000 probed successfully [ 8.814120] remoteproc remoteproc6: 4b2b4000.pru is available [ 8.862445] pru-rproc 4b2b4000.pru: PRU rproc node pru@4b2b4000 probed successfully [ 8.929607] remoteproc remoteproc7: 4b2b8000.pru is available [ 8.985483] pru-rproc 4b2b8000.pru: PRU rproc node pru@4b2b8000 probed successfully [ 9.064717] prueth pruss2_eth: port 2: using random MAC addr: ce:2f:a5:3d:14:16 [ 9.107174] prueth pruss2_eth: pruss_fw_drop_untagged_vlan 0 [ 9.145748] prueth pruss2_eth: pruss MC Mask (Port 0) ff:ff:ff:ff:ff:ff [ 9.188547] prueth pruss2_eth: pruss MC Mask (Port 1) ff:ff:ff:ff:ff:ff [ 9.237555] prueth pruss2_eth: TI PRU ethernet (type 0) driver initialized [ 10.003692] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: probing service rpc_example_1 with src 1024 dst 101 [ 10.008746] dwc3 48890000.usb: Failed to get clk 'ref': -2 [ 10.044618] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: published functions = 8 [ 10.125501] dwc3 488d0000.usb: Failed to get clk 'ref': -2 [ 10.166293] NET: Registered protocol family 45 [ 10.294240] usbcore: registered new interface driver usbfs [ 10.300236] usbcore: registered new interface driver hub [ 10.309074] usbcore: registered new device driver usb [ 10.343582] iep ptp bc clkid -1 [ 10.348815] remoteproc remoteproc7: powering up 4b2b8000.pru [ 10.356704] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.363532] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 10.372855] remoteproc remoteproc7: Booting fw image ti-pruss/am57xx-pru1-prueth-fw.elf, size 7256 [ 10.382831] pruss 4b280000.pruss: configured system_events[63-0] = 00600000,08a00000 [ 10.383007] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 10.395767] pruss 4b280000.pruss: configured intr_channels = 0x0000032a host_intr = 0x000002aa [ 10.408863] remoteproc remoteproc7: remote processor 4b2b8000.pru is now up [ 10.417026] xhci-hcd xhci-hcd.1.auto: irq 175, io mem 0x48890000 [ 10.423080] net eth1: started [ 10.423205] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.427867] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 10.442386] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.450141] usb usb1: Product: xHCI Host Controller [ 10.455025] remoteproc remoteproc6: powering up 4b2b4000.pru [ 10.456625] usb usb1: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd [ 10.468115] usb usb1: SerialNumber: xhci-hcd.1.auto [ 10.474592] remoteproc remoteproc6: Booting fw image ti-pruss/am57xx-pru0-prueth-fw.elf, size 7228 [ 10.474832] hub 1-0:1.0: USB hub found [ 10.488760] pruss 4b280000.pruss: configured system_events[63-0] = 00000600,04500000 [ 10.488933] hub 1-0:1.0: 1 port detected [ 10.503153] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 10.508766] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 10.508855] pruss 4b280000.pruss: configured intr_channels = 0x000000d5 host_intr = 0x00000155 [ 10.518089] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 10.532602] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.541305] remoteproc remoteproc6: remote processor 4b2b4000.pru is now up [ 10.541365] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 10.557908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.563099] net eth0: started [ 10.566191] usb usb2: Product: xHCI Host Controller [ 10.568685] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.573243] usb usb2: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd [ 10.586045] usb usb2: SerialNumber: xhci-hcd.1.auto [ 10.592459] hub 2-0:1.0: USB hub found [ 10.596511] hub 2-0:1.0: 1 port detected [ 10.601797] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 10.607679] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 10.616051] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 10.625944] xhci-hcd xhci-hcd.2.auto: irq 192, io mem 0x488d0000 [ 10.632416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 10.640956] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.649563] usb usb3: Product: xHCI Host Controller [ 10.655823] usb usb3: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd [ 10.662862] usb usb3: SerialNumber: xhci-hcd.2.auto [ 10.671971] hub 3-0:1.0: USB hub found [ 10.675871] hub 3-0:1.0: 1 port detected [ 10.680870] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 10.692326] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 10.701840] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 10.708773] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.717379] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 10.725923] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.733532] usb usb4: Product: xHCI Host Controller [ 10.738512] usb usb4: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd [ 10.745660] usb usb4: SerialNumber: xhci-hcd.2.auto [ 10.752052] hub 4-0:1.0: USB hub found [ 10.755988] hub 4-0:1.0: 1 port detected *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash bc binutils-dev binutils bison-dev bison cifs-utils cpio cpp-symlinks cpp dosfstools elfutils-dev elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbc6x gdbserver gettext glmark2 gstreamer1.0-libav gzip hidapi libasm1 libbfd libcairo-perf-utils libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmpc3 libmpfr6 libreadline-dev libreadline7 libunistring2 m4-dev m4 make nettle parted pdm-anomaly-detection rsync swig-dev swig which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. Starting Save/Restore Sound Card State... [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Created slice system-systemd\x2dfsck.slice. Starting File System Check on /dev/mmcblk0p1... Starting weston.service... Starting Wait for Network to be Configured... Starting Network Name Resolution... [ OK ] Started Save/Restore Sound Card State. [ OK ] Reached target Sound Card. [ OK ] Started Login Service. [ OK ] Started File System Check on /dev/mmcblk0p1. Mounting /run/media/mmcblk0p1... [ OK ] Mounted /run/media/mmcblk0p1. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. Starting Permit User Sessions... Starting Simple Network Management Protocol (SNMP) Daemon.... Starting Enable and configure wl18xx bluetooth stack... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Permit User Sessions. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ OK ] Started Synchronize System and HW clocks. [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Started weston.service. Starting Matrix GUI... Starting telnetd.service... [ OK ] Started Matrix GUI. [ OK ] Started telnetd.service. Starting thttpd.service... [ OK ] Started thttpd.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org mitysom-am57x ttyS2 Arago 2019.11 mitysom-am57x ttyS2 mitysom-am57x login: [ 32.472946] aic_dvdd: disabling [ 133.772670] NET: Registered protocol family 15 [ 133.860216] Initializing XFRM netlink socket [ 268.632935] omap-mailbox 48840000.mailbox: Try increasing MBOX_TX_QUEUE_LEN [ 268.639940] omap-rproc 58820000.ipu: PM mbox_send_message failed: -105