Linux version 3.2.0+ (jcormier@mitydsp-ubuntu14) (gcc version 4.5.4 20120305 (prerelease) (GCC) ) #3 PREEMPT Tue Jun 17 10:57:27 EDT 2014 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: MityDSP-L138/MityARM-1808 Ignoring unrecognised tag 0x42000101 Memory policy: ECC disabled, Data cache writethrough DaVinci da850/omap-l138/am18x variant 0x1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 24384 Kernel command line: mem=96M console=ttyS1,115200n8 mtdparts=nand:128M(rootfs),-(userfs) root=/dev/mmcblk0p1 rw,rootwait ip=dhcp PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 96MB = 96MB total Memory: 91296k/91296k available, 7008k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc6800000 - 0xfea00000 ( 898 MB) lowmem : 0xc0000000 - 0xc6000000 ( 96 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc053e950 (5339 kB) .init : 0xc053f000 - 0xc0568000 ( 164 kB) .data : 0xc0568000 - 0xc05c7e80 ( 384 kB) .bss : 0xc05c7ea4 - 0xc05f4970 ( 179 kB) NR_IRQS:245 Console: colour dummy device 80x30 Calibrating delay loop... 148.88 BogoMIPS (lpj=744448) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok devtmpfs: initialized DaVinci: 144 gpio irqs print_constraints: dummy: NET: Registered protocol family 16 baseboard_pre_init: Entered mityomapl138_setup_nand: using 8 bit data baseboard_init [IndustrialIO]... bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb print_constraints: VDCDC1: 1150 <--> 1350 mV at 1200 mV print_constraints: VDCDC2: 1800 mV print_constraints: VDCDC3: 1200 mV print_constraints: LDO1: 1800 mV print_constraints: LDO2: 2500 <--> 3300 mV at 3300 mV Advanced Linux Sound Architecture Driver Version 1.0.24. Switching to clocksource timer0_1 musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) Waiting for USB PHY clock good... musb-hdrc musb-hdrc: USB OTG mode controller at fee00000 using PIO, IRQ 58 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 178 io scheduler noop registered (default) start plist test end plist test Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A console [ttyS1] enabled serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A brd: module loaded at24 1-0050: 256 byte 24c02 EEPROM, read-only, 0 bytes/write MityOMAPL138: Found MAC = 00:50:c2:e6:70:b5 MityOMAPL138: Part Number = L138-DG-225-RI ahci ahci: forcing PORTS_IMPL to 0x1 ahci ahci: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc scsi0 : ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x01e18000-0x01e19fff] port 0x100 irq 67 ONFI flash detected ONFI param page 0 valid NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP) Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 Creating 2 MTD partitions on "davinci_nand.1": 0x000000000000-0x000008000000 : "rootfs" 0x000008000000-0x000010000000 : "homefs" davinci_nand davinci_nand.1: controller rev. 2.5 spi_davinci spi_davinci.1: DMA: supported spi_davinci spi_davinci.1: DMA: RX channel: 18, TX channel: 19, event queue: 0 m25p80 spi1.0: m25p64-nonjedec (8192 Kbytes) Creating 8 MTD partitions on "m25p80": 0x000000000000-0x000000010000 : "ubl" 0x000000010000-0x000000090000 : "u-boot" 0x000000090000-0x0000000a0000 : "u-boot-env" 0x0000000a0000-0x0000000b0000 : "periph-config" No LCD configured MII PHY configured 0x0000000b0000-0x000000100000 : "reserved" 0x000000100000-0x000000400000 : "kernel" 0x000000400000-0x000000600000 : "fpga" 0x000000600000-0x000000800000 : "spare" spi_davinci spi_davinci.1: Controller at 0xfef0e000 CAN device driver interface mcp251x spi1.1: probed davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask fffffff7 davinci_mdio.0: probed davinci_mdio davinci_mdio.0: phy[3]: device 0:03, driver unknown ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci ohci.0: DA8xx OHCI ohci ohci.0: new USB bus registered, assigned bus number 1 Waiting for USB PHY clock good... ohci ohci.0: irq 59, io mem 0x01e25000 ata1: SATA link down (SStatus 0 SControl 300) usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: DA8xx OHCI usb usb1: Manufacturer: Linux 3.2.0+ ohci_hcd usb usb1: SerialNumber: ohci.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. gadget: using random self ethernet address gadget: using random host ethernet address usb0: MAC d6:29:40:5e:52:83 usb0: HOST MAC 66:8a:7e:1d:fb:03 gadget: Ethernet Gadget, version: Memorial Day 2008 gadget: g_ether ready musb-hdrc musb-hdrc: MUSB HDRC host driver musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: MUSB HDRC host driver usb usb2: Manufacturer: Linux 3.2.0+ musb-hcd usb usb2: SerialNumber: musb-hdrc hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected mousedev: PS/2 mouse device common for all mice omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0 omap_rtc: RTC power up reset detected omap_rtc: already running i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu davinci_mmc davinci_mmc.0: Using DMA, 4-bit mode usbcore: registered new interface driver usbhid usbhid: USB HID core driver mmc0: new high speed SDHC card at address 1234 mmcblk0: mmc0:1234 SA08G 7.28 GiB mmcblk0: p1 dsd1791 spi1.2: Failed to add route LLOUT->Line Out asoc: dsd1791 <-> davinci-mcasp.0 mapping ok ALSA device list: #0: MityDSP-L138 INDIO TCP cubic registered NET: Registered protocol family 17 can: controller area network core (rev 20090105 abi 8) NET: Registered protocol family 29 can: raw protocol (rev 20090105) regulator_init_complete: LDO2: incomplete constraints, leaving on regulator_init_complete: LDO1: incomplete constraints, leaving on regulator_init_complete: VDCDC3: incomplete constraints, leaving on regulator_init_complete: VDCDC2: incomplete constraints, leaving on regulator_init_complete: VDCDC1: incomplete constraints, leaving on console [netcon0] enabled netconsole: network logging started omap_rtc omap_rtc: setting system clock to 2000-01-01 01:04:22 UTC (946688662) davinci_mdio davinci_mdio.0: resetting idled controller net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:03, id=40005201) PHY: 0:03 - Link is Up - 100/Full Sending DHCP requests ., OK IP-Config: Got DHCP answer from 0.0.0.0, my address is 10.0.100.96 IP-Config: Complete: device=eth0, addr=10.0.100.96, mask=255.255.0.0, gw=10.0.0.1, host=10.0.100.96, domain=syr.criticallink.com, nis-domain=(none), bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) on device 179:1. devtmpfs: mounted Freeing init memory: 164K Failed to mount /sys/kernel/security: No such file or directory Welcome to The à ngström Distribution! Starting LSB: The RPC portmapper... Starting udev Coldplug all Devices... Starting Temporary Directory... Starting Remount API VFS... Started Huge Pages File System [ OK ] Starting udev Kernel Device Manager... Starting Journal Service... Started Journal Service [ OK ] Starting Debug File System... udevd[1092]: starting version 182 Started Set Up Additional Binary Formats [ OK ] Starting POSIX Message Queue File System... Starting Apply Kernel Variables... Starting Load Kernel Modules... Starting File System Check on Root Device... Started udev Kernel Device Manager [ OK ] Started LSB: The RPC portmapper [ OK ] Started Temporary Directory [ OK ] Started Remount API VFS [ OK ] Started Debug File System [ OK ] Started POSIX Message Queue File System [ OK ] Started Apply Kernel Variables [ OK ] Failed to start Load Kernel Modules [FAILED] See 'systemctl status systemd-modules-load.service' for details. Started File System Check on Root Device [ OK ] Starting Remount Root FS... Started FUSE Control File System [ OK ] Started Configuration File System [ OK ] Started udev Coldplug all Devices [ OK ] Started Remount Root FS [ OK ] Started Machine ID first boot configure [ OK ] Starting Recreate Volatile Files and Directories... Starting Load Random Seed... Started Run pending postinsts [ OK ] Started Load Random Seed [ OK ] Started Recreate Volatile Files and Directories [ OK ] Starting Restore Sound Card State... Starting Networking... Starting Timestamping service... Started Timestamping service [ OK ] Started SSH Key Generation [ OK ] Starting D-Bus System Message Bus... Starting Permit User Sessions... Starting Login Service... Starting Avahi mDNS/DNS-SD Stack... Started Restore Sound Card State [ OK ] Started Permit User Sessions [ OK ] Starting Serial Getty on ttyS1... Started Serial Getty on ttyS1 [ OK ] Started D-Bus System Message Bus [ OK ] portmap[1087]: Starting portmap daemon... Started Avahi mDNS/DNS-SD Stack [ OK ] Started Login Service [ OK ] .---O---. | | .-. o o | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution mityomapl138 ttyS1 Angstrom v2012.05 - Kernel 3.2.0+ mityomapl138 login: root ls Started Networking [ OK ] Starting DropBear SSH Server... Last login: Wed Jan 5 09:46:11 UTC 2000 from mitydsp-ubuntu14-6.local on pts/0 Started DropBear SSH Server [ OK ] Starting Getty on tty1... Started Getty on tty1 [ OK ] root@mityomapl138 ~ $