tcDspFirmware

Introduction

The tcDspFirmware static class provides access to features of the MityDSP firmware that are core independent. This includes manipulating the global interrupt enable register, and providing access to the firmware version information (either the global version, or for an individual core.

The firmware is assumed to be located at the default base address, unless changed via a call to tcDspFirmware::set_firmware_base.

See also:

MityDSP::tcDspFirmware Class Reference

Example

This is a simple example of tcDspFirmware usage:

 {
     // set firmware base ID
     tcDspFirmware::set_firmware_base(0xC0000000);

     // display firmware revision info
     tcDspFirmware::print_version_info();

     // enable interrupts of interest
     new_mask = tcDspFirmware::global_int_enable(IE_MASK_6 | IE_MASK_7);

     // play with an LED...
     unsigned int ledState = tcDspFirmware::get_led_state();
     ledState = ~ledState;
     tcDspFirmware::set_led_state(ledState);

     // check the EMIF speed (in Hz)...
     unsigned int emifSpeed = tcDspFirmware::get_emif_clock();

     // read one of the interrupt vector registers
     unsigned int vmask = tcDspFirmware::read_vector_register(5);

     // acknowledge a couple vectors
     tcDspFirmware::clear_vector_register(5, 0x00022097);
     ...
  }