Project

General

Profile

RE: gcc 4.8 for OMAP-L138 » l138_yocto_bootlog.txt

Jonathan Cormier, 02/04/2016 09:30 AM

 
1
OMAP-L138/AM-1808/AM-1810 initialization passed!
2
Configuring 128MB mDDR
3
                      Booting TI User Boot Loader
4
        UBL Version: 1.65:2.28.1 BuiltJul 11 2011 12:49:53
5
        UBL Flashtype: SPI 
6
Starting SPI Memory Copy...
7
Valid magicnum, 0x55424CBB, found at offset 0x00010000.
8
   DONE
9
Jumping to entry point at 0xC1080000.
10

    
11

    
12
U-Boot 2009.11-00001-g47e55bd (Feb 19 2015 - 14:22:30)
13

    
14
I2C:   ready
15
DRAM:  128 MB
16
NAND:  256 MiB
17
MMC:   davinci: 0
18
In:    serial
19
Out:   serial
20
Err:   serial
21
ARM    Clock : 300000000 Hz
22
DDR    Clock : 150000000 Hz
23
EMIFA  CLock : 100000000 Hz
24
DSP    Clock : 300000000 Hz
25
ASYNC3 Clock : 150000000 Hz
26
Enet  config : 2
27
MMC 0 Enable : 1
28
Resetting ethernet phy
29
Net:   Ethernet PHY: GENERIC @ 0x03 [0x8]
30

    
31
Hit any key to stop autoboot:
32
U-Boot > setenv bootargs_old $bootargs
33
U-Boot > setenv bootcmd_old $bootcmd
34
U-Boot > setenv bootargs ${bootargsbase} root=/dev/nfs nfsroot=${serverip}:/export/space/l138_yocto_fs ip=dhcp
35
U-Boot > setenv bootcmd 'tftp 0xc0700000 mityomap_yocto/uImage; bootm'
36
U-Boot > saveenv
37
U-Boot > boot
38
Using  device
39
TFTP from server 10.0.62.1; our IP address is 10.0.100.216
40
Filename 'mityomap_yocto/uImage'.
41
Load address: 0xc0700000
42
Loading: #################################################################
43
         #################################################################
44
         ############################################
45
done
46
Bytes transferred = 2541808 (26c8f0 hex)
47
## Booting kernel from Legacy Image at c0700000 ...
48
   Image Name:   Linux-3.2.0+
49
   Image Type:   ARM Linux Kernel Image (uncompressed)
50
   Data Size:    2541744 Bytes =  2.4 MB
51
   Load Address: c0008000
52
   Entry Point:  c0008000
53
   Verifying Checksum ... OK
54
   Loading Kernel Image ... OK
55
OK
56

    
57
Starting kernel ...
58

    
59
Uncompressing Linux... done, booting the kernel.
60
Linux version 3.2.0+ (jenkins@userv4) (gcc version 4.8.3 20140401 (prerelease) (Linaro GCC 4.8-2014.04) ) #1 PREEMPT Fri Jan 15 14:38:13 EST 2016
61
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
62
CPU: VIVT data cache, VIVT instruction cache
63
Machine: MityDSP-L138/MityARM-1808
64
Ignoring unrecognised tag 0x42000101
65
Memory policy: ECC disabled, Data cache writethrough
66
DaVinci da850/omap-l138/am18x variant 0x1
67
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 24384
68
Kernel command line: mem=96M console=ttyS1,115200n8 root=/dev/nfs nfsroot=10.0.62.1:/export/space/l138_yocto_fs ip=dhcp
69
PID hash table entries: 512 (order: -1, 2048 bytes)
70
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
71
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
72
Memory: 96MB = 96MB total
73
Memory: 91320k/91320k available, 6984k reserved, 0K highmem
74
Virtual kernel memory layout:
75
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
76
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
77
    vmalloc : 0xc6800000 - 0xfea00000   ( 898 MB)
78
    lowmem  : 0xc0000000 - 0xc6000000   (  96 MB)
79
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
80
      .text : 0xc0008000 - 0xc0539f94   (5320 kB)
81
      .init : 0xc053a000 - 0xc0562000   ( 160 kB)
82
      .data : 0xc0562000 - 0xc05c2000   ( 384 kB)
83
       .bss : 0xc05c2024 - 0xc05eea50   ( 179 kB)
84
NR_IRQS:245
85
Console: colour dummy device 80x30
86
Calibrating delay loop... 148.88 BogoMIPS (lpj=744448)
87
pid_max: default: 32768 minimum: 301
88
Mount-cache hash table entries: 512
89
CPU: Testing write buffer coherency: ok
90
devtmpfs: initialized
91
DaVinci: 144 gpio irqs
92
print_constraints: dummy: 
93
NET: Registered protocol family 16
94
baseboard_pre_init: Entered
95
mityomapl138_setup_nand: using 8 bit data
96
baseboard_init [IndustrialIO]...
97
bio: create slab <bio-0> at 0
98
SCSI subsystem initialized
99
usbcore: registered new interface driver usbfs
100
usbcore: registered new interface driver hub
101
usbcore: registered new device driver usb
102
print_constraints: VDCDC1: 1150 <--> 1350 mV at 1200 mV 
103
print_constraints: VDCDC2: 1800 mV 
104
print_constraints: VDCDC3: 1200 mV 
105
print_constraints: LDO1: 1800 mV 
106
print_constraints: LDO2: 2500 <--> 3300 mV at 3300 mV 
107
Advanced Linux Sound Architecture Driver Version 1.0.24.
108
Switching to clocksource timer0_1
109
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
110
Waiting for USB PHY clock good...
111
musb-hdrc musb-hdrc: USB OTG mode controller at fee00000 using PIO, IRQ 58
112
NET: Registered protocol family 2
113
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
114
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
115
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
116
TCP: Hash tables configured (established 4096 bind 4096)
117
TCP reno registered
118
UDP hash table entries: 256 (order: 0, 4096 bytes)
119
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
120
NET: Registered protocol family 1
121
RPC: Registered named UNIX socket transport module.
122
RPC: Registered udp transport module.
123
RPC: Registered tcp transport module.
124
RPC: Registered tcp NFSv4.1 backchannel transport module.
125
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
126
msgmni has been set to 178
127
io scheduler noop registered (default)
128
start plist test
129
end plist test
130
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
131
serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A
132
serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A
133
console [ttyS1] enabled
134
serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A
135
brd: module loaded
136
at24 1-0050: 256 byte 24c02 EEPROM, read-only, 0 bytes/write
137
MityOMAPL138: Found MAC = 00:50:c2:e6:70:b5
138
MityOMAPL138: Part Number = L138-DG-225-RI
139
ahci ahci: forcing PORTS_IMPL to 0x1
140
ahci ahci: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
141
ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc 
142
scsi0 : ahci_platform
143
ata1: SATA max UDMA/133 mmio [mem 0x01e18000-0x01e19fff] port 0x100 irq 67
144
ONFI flash detected
145
ONFI param page 0 valid
146
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP)
147
Bad block table found at page 131008, version 0x01
148
Bad block table found at page 130944, version 0x01
149
Creating 2 MTD partitions on "davinci_nand.1":
150
0x000000000000-0x000008000000 : "rootfs"
151
0x000008000000-0x000010000000 : "homefs"
152
davinci_nand davinci_nand.1: controller rev. 2.5
153
spi_davinci spi_davinci.1: DMA: supported
154
spi_davinci spi_davinci.1: DMA: RX channel: 18, TX channel: 19, event queue: 0
155
m25p80 spi1.0: m25p64-nonjedec (8192 Kbytes)
156
Creating 8 MTD partitions on "m25p80":
157
0x000000000000-0x000000010000 : "ubl"
158
0x000000010000-0x000000090000 : "u-boot"
159
0x000000090000-0x0000000a0000 : "u-boot-env"
160
0x0000000a0000-0x0000000b0000 : "periph-config"
161
No LCD configured
162
MII PHY configured
163
0x0000000b0000-0x000000100000 : "reserved"
164
0x000000100000-0x000000400000 : "kernel"
165
0x000000400000-0x000000600000 : "fpga"
166
0x000000600000-0x000000800000 : "spare"
167
spi_davinci spi_davinci.1: Controller at 0xfef0e000
168
CAN device driver interface
169
mcp251x spi1.1: probed
170
davinci_mdio davinci_mdio.0: davinci mdio revision 1.5
171
davinci_mdio davinci_mdio.0: detected phy mask fffffff7
172
davinci_mdio.0: probed
173
davinci_mdio davinci_mdio.0: phy[3]: device 0:03, driver unknown
174
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
175
ohci ohci.0: DA8xx OHCI
176
ohci ohci.0: new USB bus registered, assigned bus number 1
177
Waiting for USB PHY clock good...
178
ohci ohci.0: irq 59, io mem 0x01e25000
179
ata1: SATA link down (SStatus 0 SControl 300)
180
hub 1-0:1.0: USB hub found
181
hub 1-0:1.0: 1 port detected
182
Initializing USB Mass Storage driver...
183
usbcore: registered new interface driver usb-storage
184
USB Mass Storage support registered.
185
mousedev: PS/2 mouse device common for all mice
186
omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
187
omap_rtc: RTC power up reset detected
188
i2c /dev entries driver
189
cpuidle: using governor ladder
190
cpuidle: using governor menu
191
davinci_mmc davinci_mmc.0: Using DMA, 4-bit mode
192
usbcore: registered new interface driver usbhid
193
usbhid: USB HID core driver
194
dsd1791 spi1.2: Failed to add route LLOUT->Line Out
195
asoc: dsd1791 <-> davinci-mcasp.0 mapping ok
196
ALSA device list:
197
mmc0: new high speed SDHC card at address 1234
198
  #0: MityDSP-L138 INDIO
199
TCP cubic registered
200
NET: Registered protocol family 17
201
can: controller area network core (rev 20090105 abi 8)
202
mmcblk0: mmc0:1234 SA04G 3.67 GiB 
203
NET: Registered protocol family 29
204
 mmcblk0: p1
205
can: raw protocol (rev 20090105)
206
regulator_init_complete: LDO2: incomplete constraints, leaving on
207
regulator_init_complete: LDO1: incomplete constraints, leaving on
208
regulator_init_complete: VDCDC3: incomplete constraints, leaving on
209
regulator_init_complete: VDCDC2: incomplete constraints, leaving on
210
regulator_init_complete: VDCDC1: incomplete constraints, leaving on
211
console [netcon0] enabled
212
netconsole: network logging started
213
omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
214
davinci_mdio davinci_mdio.0: resetting idled controller
215
net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:03, id=40005201)
216
PHY: 0:03 - Link is Up - 100/Full
217
Sending DHCP requests ., OK
218
IP-Config: Got DHCP answer from 0.0.0.0, my address is 10.0.101.194
219
IP-Config: Complete:
220
     device=eth0, addr=10.0.101.194, mask=255.255.0.0, gw=10.0.0.1,
221
     host=10.0.101.194, domain=syr.criticallink.com, nis-domain=(none),
222
     bootserver=0.0.0.0, rootserver=10.0.62.1, rootpath=
223
VFS: Mounted root (nfs filesystem) on device 0:14.
224
devtmpfs: mounted
225
Freeing init memory: 160K
226
systemd[1]: systemd 211 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
227
systemd[1]: Detected architecture 'arm'.
228

    
229
Welcome to Critical Link Linux (systemd) 1.6.0 (daisy)!
230

    
231
NET: Registered protocol family 10
232
systemd[1]: Inserted module 'ipv6'
233
systemd[1]: Set hostname to <mityomapl138>.
234
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
235
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
236
systemd[1]: Expecting device dev-ttyS1.device...
237
         Expecting device dev-ttyS1.device...
238
systemd[1]: Starting Remote File Systems.
239
[  OK  ] Reached target Remote File Systems.
240
systemd[1]: Reached target Remote File Systems.
241
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
242
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
243
systemd[1]: Starting Paths.
244
[  OK  ] Reached target Paths.
245
systemd[1]: Reached target Paths.
246
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
247
systemd[1]: Starting Swap.
248
[  OK  ] Reached target Swap.
249
systemd[1]: Reached target Swap.
250
systemd[1]: Starting Root Slice.
251
[  OK  ] Created slice Root Slice.
252
systemd[1]: Created slice Root Slice.
253
systemd[1]: Starting Delayed Shutdown Socket.
254
[  OK  ] Listening on Delayed Shutdown Socket.
255
systemd[1]: Listening on Delayed Shutdown Socket.
256
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
257
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
258
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
259
systemd[1]: Starting Syslog Socket.
260
[  OK  ] Listening on Syslog Socket.
261
systemd[1]: Listening on Syslog Socket.
262
systemd[1]: Starting udev Kernel Socket.
263
[  OK  ] Listening on udev Kernel Socket.
264
systemd[1]: Listening on udev Kernel Socket.
265
systemd[1]: Starting udev Control Socket.
266
[  OK  ] Listening on udev Control Socket.
267
systemd[1]: Listening on udev Control Socket.
268
systemd[1]: Starting User and Session Slice.
269
[  OK  ] Created slice User and Session Slice.
270
systemd[1]: Created slice User and Session Slice.
271
systemd[1]: Starting Journal Socket.
272
[  OK  ] Listening on Journal Socket.
273
systemd[1]: Listening on Journal Socket.
274
systemd[1]: Starting System Slice.
275
[  OK  ] Created slice System Slice.
276
systemd[1]: Created slice System Slice.
277
systemd[1]: Started File System Check on Root Device.
278
systemd[1]: Starting Remount Root and Kernel File Systems...
279
         Starting Remount Root and Kernel File Systems...
280
systemd[1]: Started Set Up Additional Binary Formats.
281
systemd[1]: Started Load Kernel Modules.
282
systemd[1]: Starting Create list of required static device nodes for the current kernel...
283
         Starting Create list of required static device nodes...rrent kernel...
284
systemd[1]: Starting Apply Kernel Variables...
285
         Starting Apply Kernel Variables...
286
systemd[1]: Mounted FUSE Control File System.
287
systemd[1]: Mounted Configuration File System.
288
systemd[1]: Mounting Debug File System...
289
         Mounting Debug File System...
290
systemd[1]: Starting udev Coldplug all Devices...
291
         Starting udev Coldplug all Devices...
292
systemd[1]: Mounted Huge Pages File System.
293
systemd[1]: Mounting POSIX Message Queue File System...
294
         Mounting POSIX Message Queue File System...
295
systemd[1]: Starting system-serial\x2dgetty.slice.
296
[  OK  ] Created slice system-serial\x2dgetty.slice.
297
systemd[1]: Created slice system-serial\x2dgetty.slice.
298
systemd[1]: Starting system-getty.slice.
299
[  OK  ] Created slice system-getty.slice.
300
systemd[1]: Created slice system-getty.slice.
301
systemd[1]: Starting Journal Service...
302
         Starting Journal Service...
303
[  OK  ] Started Journal Service.
304
systemd[1]: Started Journal Service.
305
         Mounting Temporary Directory...
306
[  OK  ] Reached target Slices.
307
[  OK  ] Mounted POSIX Message Queue File System.
308
[  OK  ] Mounted Debug File System.
309
[  OK  ] Started Remount Root and Kernel File Systems.
310
[  OK  ] Started Create list of required static device nodes ...current kernel.
311
[  OK  ] Started Apply Kernel Variables.
312
[  OK  ] Mounted Temporary Directory.
313
         Starting Create Static Device Nodes in /dev...
314
         Starting Load/Save Random Seed...
315
[  OK  ] Started Load/Save Random Seed.
316
[  OK  ] Started Create Static Device Nodes in /dev.
317
         Starting udev Kernel Device Manager...
318
[  OK  ] Reached target Local File Systems (Pre).
319
         Mounting /var/volatile...
320
[systemd-udevd[1318]: starting version 211
321
  OK  ] Mounted /var/volatile.
322
[  OK  ] Started udev Kernel Device Manager.
323
[  OK  ] Reached target Local File Systems.
324
         Starting Trigger Flushing of Journal to Persistent Storage...
325
         Starting Create Volatile Files and Directories...
326
systemd-journald[1115]: Received request to flush runtime journal from PID 1
327
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
328
[  OK  ] Started Create Volatile Files and Directories.
329
         Starting Update UTMP about System Boot/Shutdown...
330
[  OK  ] Started Update UTMP about System Boot/Shutdown.
331
[  OK  ] Found device /dev/ttyS1.
332
[  OK  ] Reached target Sound Card.
333
[  OK  ] Started udev Coldplug all Devices.
334
[  OK  ] Reached target System Initialization.
335
[  OK  ] Listening on dropbear.socket.
336
[  OK  ] Reached target Timers.
337
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
338
[  OK  ] Listening on D-Bus System Message Bus Socket.
339
[  OK  ] Reached target Sockets.
340
[  OK  ] Reached target Basic System.
341
         Starting Avahi mDNS/DNS-SD Stack...
342
         Starting Network Time Service (one-shot ntpdate mode)...
343
         Starting Kernel Logging Service...
344
[  OK  ] Started Kernel Logging Service.
345
         Starting System Logging Service...
346
[  OK  ] Started System Logging Service.
347
         Starting Permit User Sessions...
348
         Starting D-Bus System Message Bus...
349
[  OK  ] Started D-Bus System Message Bus.
350
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
351
         Starting Network Service...
352
         Starting Login Service...
353
[  OK  ] Started Network Time Service (one-shot ntpdate mode).
354
[  OK  ] Started Permit User Sessions.
355
[  OK  ] Started Network Service.
356
kjournald starting.  Commit interval 5 seconds
357
EXT3-fs (mmcblk0p1): using internal journal
358
EXT3-fs (mmcblk0p1): recovery complete
359
EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
360
[  OK  ] Started Login Service.
361
[  OK  ] Reached target Network.
362
         Starting Serial Getty on ttyS1...
363
[  OK  ] Started Serial Getty on ttyS1.
364
         Starting Getty on tty1...
365
[  OK  ] Started Getty on tty1.
366
[  OK  ] Reached target Login Prompts.
367
         Starting Network Time Service...
368
systemd[1]: PID file /run/ntpd.pid not readable (yet?) after start.
369
[  OK  ] Started Network Time Service.
370

    
371

    
372
     o  0
373
     | /       Copyright (c) 2015
374
    (CL)---o   Critical Link, LLC
375
      \
376
       O
377

    
378
Critical Link LLC http://support.criticallink.com mityomapl138 ttyS1
379
        Linux kernel verison Linux armv5tejl #1 PREEMPT Fri Jan 15 14:38:13 EST 2016
380
 
381
Critical Link Linux (systemd) 1.6.0 mityomapl138 ttyS1
382

    
383
mityomapl138 login: root
384
root@mityomapl138:~#
385
root@mityomapl138:~# cat /etc/systemd/network/eth0.network 
386
[Match]
387
Name=eth0
388

    
389
[Network]
390
DHCP=yes
391

    
392
[DHCP]
393
RouteMetric=10
394
root@mityomapl138:~# shutdown -r now
395
[  OK  ] Removed slice user-0.slice.
396
[  OK  ] Stopped target Sound Card.
397
[  OK  ] Stopped target Multi-User System.
398
         Stopping Network Time Service...
399
         Stopping Kernel Logging Service...
400
         Stopping System Logging Service...
401
         Stopping Login Service...
402
[  OK  ] Stopped target Login Prompts.
403
         Stopping Serial Getty on ttyS1...
404
         Stopping Getty on tty1...
405
         Stopping Avahi mDNS/DNS-SD Stack...
406
         Stopping D-Bus System Message Bus...
407
[  OK  ] Stopped Kernel Logging Service.
408
[  OK  ] Stopped Avahi mDNS/DNS-SD Stack.
409
[  OK  ] Stopped System Logging Service.
410
[  OK  ] Stopped D-Bus System Message Bus.
411
[  OK  ] Stopped Login Service.
412
[  OK  ] Stopped Serial Getty on ttyS1.
413
[  OK  ] Stopped Getty on tty1.
414
[  OK  ] Stopped Network Time Service.
415
         Stopping Network Time Service (one-shot ntpdate mode)...
416
[  OK  ] Stopped Network Time Service (one-shot ntpdate mode).
417
[  OK  ] Stopped target Network.
418
[  OK  ] Removed slice system-getty.slice.
419
[  OK  ] Removed slice system-serial\x2dgetty.slice.
420
         Stopping Permit User Sessions...
421
[  OK  ] Stopped Permit User Sessions.
422
[  OK  ] Stopped target Basic System.
423
[  OK  ] Stopped target Slices.
424
[  OK  ] Removed slice User and Session Slice.
425
[  OK  ] Stopped target Paths.
426
[  OK  ] Stopped target Timers.
427
[  OK  ] Stopped target Sockets.
428
[  OK  ] Closed dropbear.socket.
429
[  OK  ] Closed Syslog Socket.
430
[  OK  ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
431
[  OK  ] Closed D-Bus System Message Bus Socket.
432
[  OK  ] Stopped target System Initialization.
433
         Stopping Load/Save Random Seed...
434
         Stopping Apply Kernel Variables...
435
[  OK  ] Stopped Apply Kernel Variables.
436
         Stopping Update UTMP about System Boot/Shutdown...
437
[  OK  ] Stopped target Swap.
438
[  OK  ] Stopped target Remote File Systems.
439
[  OK  ] Stopped Load/Save Random Seed.
440
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
441
         Stopping Create Volatile Files and Directories...
442
[  OK  ] Stopped Create Volatile Files and Directories.
443
[  OK  ] Stopped target Local File Systems.
444
         Unmounting /run/user/0...
445
         Unmounting /media/mmcblk0p1...
446
         Unmounting /var/volatile...
447
         Unmounting Temporary Directory...
448
[  OK  ] Unmounted /run/user/0.
449
[  OK  ] Unmounted /media/mmcblk0p1.
450
[  OK  ] Unmounted /var/volatile.
451
[  OK  ] Unmounted Temporary Directory.
452
[  OK  ] Reached target Unmount All Filesystems.
453
[  OK  ] Stopped target Local File Systems (Pre).
454
         Stopping Remount Root and Kernel File Systems...
455
[  OK  ] Stopped Remount Root and Kernel File Systems.
456
[  OK  ] Reached target Shutdown.
457
systemd-shutdown[1]: Sending SIGTERM to remaining processes...
458
systemd-journald[1115]: Received SIGTERM from PID 1 (systemd-shutdow).
459
systemd-shutdown[1]: Sending SIGKILL to remaining processes...
460
systemd-shutdown[1]: Unmounting file systems.
461
systemd-shutdown[1]: Unmounting /dev/mqueue.
462
systemd-shutdown[1]: Unmounting /sys/kernel/debug.
463
systemd-shutdown[1]: All filesystems unmounted.
464
systemd-shutdown[1]: Deactivating swaps.
465
systemd-shutdown[1]: All swaps deactivated.
466
systemd-shutdown[1]: Detaching loop devices.
467
systemd-shutdown[1]: All loop devices detached.
468
systemd-shutdown[1]: Detaching DM devices.
469
systemd-shutdown[1]: All DM devices detached.
470
systemd-shutdown[1]: Storage is finalized.
471
systemd-shutdown[1]: Rebooting.
472

    
(1-1/2) Go to top
Add picture from clipboard (Maximum size: 1 GB)