Project

General

Profile

RE: spidev loopback testing not working ยป dmesg_Bootlog.txt

Bootlog - Sandeep Sivadas, 11/22/2023 05:42 AM

 
1
root@mitysom-am57x:/opt# dmesg
2
[    0.000000] Booting Linux on physical CPU 0x0
3
[    0.000000] Linux version 4.19.94-g7317dfbd4116-dirty (mitysom@mitysom-OptiPlex-5040) (gcc version 8.3.0 (GNU Toolchain for the A3
4
[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d
5
[    0.000000] CPU: div instructions available: patching division code
6
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
7
[    0.000000] OF: fdt: Machine model: Critical Link MitySOM-AM57x
8
[    0.000000] Memory policy: Data cache writealloc
9
[    0.000000] efi: Getting EFI parameters from FDT:
10
[    0.000000] efi: UEFI not found.
11
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB
12
[    0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool
13
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB
14
[    0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool
15
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009d000000, size 32 MiB
16
[    0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool
17
[    0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB
18
[    0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool
19
[    0.000000] cma: Reserved 128 MiB at 0x00000000f6c00000
20
[    0.000000] OMAP4: Map 0x00000000fed00000 to (ptrval) for dram barrier
21
[    0.000000] On node 0 totalpages: 461824
22
[    0.000000]   DMA zone: 1728 pages used for memmap
23
[    0.000000]   DMA zone: 0 pages reserved
24
[    0.000000]   DMA zone: 139008 pages, LIFO batch:31
25
[    0.000000]   HighMem zone: 322816 pages, LIFO batch:63
26
[    0.000000] DRA752 ES2.0
27
[    0.000000] random: get_random_bytes called from start_kernel+0xb4/0x470 with crng_init=0
28
[    0.000000] percpu: Embedded 15 pages/cpu s32396 r8192 d20852 u61440
29
[    0.000000] pcpu-alloc: s32396 r8192 d20852 u61440 alloc=15*4096
30
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
31
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 460096
32
[    0.000000] Kernel command line: console=ttyS2,115200n8 cma=128MB drm.edid_firmware=edid/1920x1080.bin video=HDMI-A-1:1920x1080 rt
33
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
34
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
35
[    0.000000] Memory: 1550312K/1847296K available (10240K kernel code, 337K rwdata, 2824K rodata, 2048K init, 272K bss, 34840K rese)
36
[    0.000000] Virtual kernel memory layout:
37
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
38
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
39
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
40
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
41
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
42
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
43
                     .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
44
                     .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
45
                     .data : 0x(ptrval) - 0x(ptrval)   ( 338 kB)
46
                      .bss : 0x(ptrval) - 0x(ptrval)   ( 273 kB)
47
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
48
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
49
[    0.000000]  Tasks RCU enabled.
50
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
51
[    0.000000] GIC: Using split EOI/Deactivate mode
52
[    0.000000] OMAP clockevent source: timer1 at 32786 Hz
53
[    0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys).
54
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns
55
[    0.000006] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns
56
[    0.000018] Switching to timer-based delay loop, resolution 162ns
57
[    0.000290] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
58
[    0.000299] OMAP clocksource: 32k_counter at 32768 Hz
59
[    0.000742] Console: colour dummy device 80x30
60
[    0.000785] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)
61
[    0.000800] pid_max: default: 32768 minimum: 301
62
[    0.000921] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
63
[    0.000935] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
64
[    0.001492] CPU: Testing write buffer coherency: ok
65
[    0.001528] CPU0: Spectre v2: using ICIALLU workaround
66
[    0.001740] /cpus/cpu@0 missing clock-frequency property
67
[    0.001759] /cpus/cpu@1 missing clock-frequency property
68
[    0.001772] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
69
[    0.059920] Setting up static identity map for 0x80200000 - 0x80200060
70
[    0.079928] rcu: Hierarchical SRCU implementation.
71
[    0.100121] EFI services will not be available.
72
[    0.119993] smp: Bringing up secondary CPUs ...
73
[    0.200369] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
74
[    0.200375] CPU1: Spectre v2: using ICIALLU workaround
75
[    0.200498] smp: Brought up 1 node, 2 CPUs
76
[    0.200510] SMP: Total of 2 processors activated (24.59 BogoMIPS).
77
[    0.200519] CPU: All CPU(s) started in HYP mode.
78
[    0.200526] CPU: Virtualization extensions available.
79
[    0.201091] devtmpfs: initialized
80
[    0.217716] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
81
[    0.217975] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
82
[    0.217993] futex hash table entries: 512 (order: 3, 32768 bytes)
83
[    0.222277] pinctrl core: initialized pinctrl subsystem
84
[    0.222795] DMI not present or invalid.
85
[    0.223073] NET: Registered protocol family 16
86
[    0.224274] DMA: preallocated 256 KiB pool for atomic coherent allocations
87
[    0.225164] omap_hwmod: l3_main_2 using broken dt data from ocp
88
[    0.417394] cpuidle: using governor ladder
89
[    0.417430] cpuidle: using governor menu
90
[    0.427348] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0)
91
[    0.427415] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio-0-31)
92
[    0.427456] OMAP GPIO hardware version 0.1
93
[    0.428071] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1)
94
[    0.428140] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio-32-63)
95
[    0.428775] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2)
96
[    0.428839] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio-64-95)
97
[    0.429472] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3)
98
[    0.429537] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio-96-127)
99
[    0.430165] gpio gpiochip4: (gpio-128-159): added GPIO chardev (254:4)
100
[    0.430228] gpiochip_setup_dev: registered GPIOs 128 to 159 on device: gpiochip4 (gpio-128-159)
101
[    0.430878] gpio gpiochip5: (gpio-160-191): added GPIO chardev (254:5)
102
[    0.430948] gpiochip_setup_dev: registered GPIOs 160 to 191 on device: gpiochip5 (gpio-160-191)
103
[    0.431587] gpio gpiochip6: (gpio-192-223): added GPIO chardev (254:6)
104
[    0.431654] gpiochip_setup_dev: registered GPIOs 192 to 223 on device: gpiochip6 (gpio-192-223)
105
[    0.432286] gpio gpiochip7: (gpio-224-255): added GPIO chardev (254:7)
106
[    0.432351] gpiochip_setup_dev: registered GPIOs 224 to 255 on device: gpiochip7 (gpio-224-255)
107
[    0.453397] No ATAGs?
108
[    0.453469] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
109
[    0.453485] hw-breakpoint: maximum watchpoint size is 8 bytes.
110
[    0.454323] OMAP DMA hardware revision 0.0
111
[    0.465954] edma 43300000.edma: memcpy is disabled
112
[    0.469332] edma 43300000.edma: TI EDMA DMA engine driver
113
[    0.476504] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
114
[    0.477049] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vmain[0]'
115
[    0.477285] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-v3_3d[0]'
116
[    0.477526] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-aic_dvdd[0]'
117
[    0.477771] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vtt[0]'
118
[    0.478048] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixedregulator[0]' - status (0)
119
[    0.563125] omap-iommu 40d01000.mmu: 40d01000.mmu registered
120
[    0.563312] omap-iommu 40d02000.mmu: 40d02000.mmu registered
121
[    0.563554] omap-iommu 58882000.mmu: 58882000.mmu registered
122
[    0.563789] omap-iommu 55082000.mmu: 55082000.mmu registered
123
[    0.564163] omap-iommu 41501000.mmu: 41501000.mmu registered
124
[    0.564338] omap-iommu 41502000.mmu: 41502000.mmu registered
125
[    0.564619] iommu: Adding device 58820000.ipu to group 1
126
[    0.564698] iommu: Adding device 55020000.ipu to group 2
127
[    0.564833] iommu: Adding device 40800000.dsp to group 0
128
[    0.565071] iommu: Adding device 41000000.dsp to group 3
129
[    0.566301] SCSI subsystem initialized
130
[    0.567349] palmas 0-0058: Irq flag is 0x00000008
131
[    0.593547] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0
132
[    0.595174] SMPS12: supplied by regulator-dummy
133
[    0.596781] SMPS3: supplied by VMAIN
134
[    0.598265] SMPS45: supplied by regulator-dummy
135
[    0.599996] SMPS6: supplied by VMAIN
136
[    0.601581] SMPS7: supplied by VMAIN
137
[    0.603321] SMPS8: supplied by VMAIN
138
[    0.604808] random: fast init done
139
[    0.604916] SMPS9: supplied by VMAIN
140
[    0.605824] LDO1: supplied by VMAIN
141
[    0.621207] LDO2: supplied by VMAIN
142
[    0.641223] LDO3: supplied by VMAIN
143
[    0.661243] LDO4: supplied by VMAIN
144
[    0.661904] LDO5: supplied by regulator-dummy
145
[    0.662583] LDO6: supplied by regulator-dummy
146
[    0.663244] LDO7: supplied by regulator-dummy
147
[    0.663900] LDO8: supplied by regulator-dummy
148
[    0.664557] LDO9: supplied by VMAIN
149
[    0.681559] LDOLN: supplied by VMAIN
150
[    0.701289] LDOUSB: supplied by VMAIN
151
[    0.723079] gpiochip_find_base: found new base at 504
152
[    0.723229] gpio gpiochip8: (48070000.i2c:tps659038@58:tps659038_gpio): added GPIO chardev (254:8)
153
[    0.723303] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip8 (48070000.i2c:tps659038@58:tps659038_gpio)
154
[    0.723771] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
155
[    0.724700] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
156
[    0.724912] media: Linux media interface: v0.10
157
[    0.724951] videodev: Linux video capture interface: v2.00
158
[    0.725025] pps_core: LinuxPPS API ver. 1 registered
159
[    0.725034] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
160
[    0.725055] PTP clock support registered
161
[    0.725085] EDAC MC: Ver: 3.0.0
162
[    0.725856] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
163
[    0.726112] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
164
[    0.740914] Advanced Linux Sound Architecture Driver Initialized.
165
[    0.741727] clocksource: Switched to clocksource arch_sys_counter
166
[    0.750013] NET: Registered protocol family 2
167
[    0.750597] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
168
[    0.750626] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
169
[    0.750689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
170
[    0.751024] TCP: Hash tables configured (established 8192 bind 8192)
171
[    0.751099] UDP hash table entries: 512 (order: 2, 16384 bytes)
172
[    0.751133] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
173
[    0.751263] NET: Registered protocol family 1
174
[    0.771689] RPC: Registered named UNIX socket transport module.
175
[    0.771700] RPC: Registered udp transport module.
176
[    0.771709] RPC: Registered tcp transport module.
177
[    0.771745] RPC: Registered tcp NFSv4.1 backchannel transport module.
178
[    0.771758] PCI: CLS 0 bytes, default 64
179
[    0.772810] hw perfevents: no interrupt-affinity property for /pmu, guessing.
180
[    0.773005] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
181
[    0.773987] Initialise system trusted keyrings
182
[    0.774120] workingset: timestamp_bits=14 max_order=19 bucket_order=5
183
[    0.779108] squashfs: version 4.0 (2009/01/31) Phillip Lougher
184
[    0.789599] NFS: Registering the id_resolver key type
185
[    0.789622] Key type id_resolver registered
186
[    0.789631] Key type id_legacy registered
187
[    0.789674] ntfs: driver 2.1.32 [Flags: R/O].
188
[    0.791368] Key type asymmetric registered
189
[    0.791381] Asymmetric key parser 'x509' registered
190
[    0.791429] bounce: pool size: 64 pages
191
[    0.791461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
192
[    0.791472] io scheduler noop registered
193
[    0.791481] io scheduler deadline registered
194
[    0.791577] io scheduler cfq registered (default)
195
[    0.791588] io scheduler mq-deadline registered
196
[    0.791597] io scheduler kyber registered
197
[    0.797387] pinctrl-single 4a003400.pinmux: 282 pins, size 1128
198
[    0.804742] V3_3D: supplied by smps9
199
[    0.804986] aic_dvdd: supplied by V3_3D
200
[    0.805049] vtt_fixed: supplied by V3_3D
201
[    0.852413] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
202
[    0.855940] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 43, base_baud = 3000000) is a 8250
203
[    0.856884] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 44, base_baud = 3000000) is a 8250
204
[    1.837289] console [ttyS2] enabled
205
[    1.841740] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 45, base_baud = 3000000) is a 8250
206
[    1.852664] omap_rng 48090000.rng: Random Number Generator ver. 20
207
[    1.853199] random: crng init done
208
[    1.862492] omapdss_dss 58000000.dss: Linked as a consumer to regulator.22
209
[    1.869522] DSS: OMAP DSS rev 6.1
210
[    1.875829] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15
211
[    1.883361] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15
212
[    1.890889] tpd12s015 encoder@0: GPIO lookup for consumer (null)
213
[    1.890897] tpd12s015 encoder@0: using device tree for GPIO lookup
214
[    1.890913] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/encoder@0[0]'
215
[    1.890926] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/encoder@0[0]'
216
[    1.890935] tpd12s015 encoder@0: using lookup tables for GPIO lookup
217
[    1.890943] tpd12s015 encoder@0: No GPIO consumer (null) found
218
[    1.890952] tpd12s015 encoder@0: GPIO lookup for consumer (null)
219
[    1.890958] tpd12s015 encoder@0: using device tree for GPIO lookup
220
[    1.890971] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/encoder@0[1]'
221
[    1.890983] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/encoder@0[1]'
222
[    1.890991] tpd12s015 encoder@0: using lookup tables for GPIO lookup
223
[    1.890998] tpd12s015 encoder@0: No GPIO consumer (null) found
224
[    1.891005] tpd12s015 encoder@0: GPIO lookup for consumer (null)
225
[    1.891011] tpd12s015 encoder@0: using device tree for GPIO lookup
226
[    1.891037] of_get_named_gpiod_flags: parsed 'gpios' property of node '/encoder@0[2]' - status (0)
227
[    1.891072] gpio gpiochip6: Persistence not supported for GPIO 12
228
[    1.891861] connector-hdmi connector@0: GPIO lookup for consumer hpd
229
[    1.891868] connector-hdmi connector@0: using device tree for GPIO lookup
230
[    1.891884] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/connector@0[0]'
231
[    1.891897] of_get_named_gpiod_flags: can't parse 'hpd-gpio' property of node '/connector@0[0]'
232
[    1.891906] connector-hdmi connector@0: using lookup tables for GPIO lookup
233
[    1.891913] connector-hdmi connector@0: No GPIO consumer hpd found
234
[    1.903726] brd: module loaded
235
[    1.913050] loop: module loaded
236
[    1.920297] omap2_mcspi 480ba000.spi: registered master spi4
237
[    1.920430] spi spi4.0: setup: speed 1000000, sample trailing edge, clk inverted
238
[    1.920443] spi spi4.0: setup mode 3, 8 bits/w, 1000000 Hz max --> 0
239
[    1.920747] omap2_mcspi 480ba000.spi: registered child spi4.0
240
[    1.920776] spi spi4.1: setup: speed 1000000, sample trailing edge, clk inverted
241
[    1.920788] spi spi4.1: setup mode 3, 8 bits/w, 1000000 Hz max --> 0
242
[    1.921075] omap2_mcspi 480ba000.spi: registered child spi4.1
243
[    1.921952] ti-qspi 4b300000.spi: registered master spi0
244
[    1.922056] ti-qspi 4b300000.spi: hz: 96000000, clock divider 0
245
[    1.922089] spi spi0.0: setup mode 0, 8 bits/w, 96000000 Hz max --> 0
246
[    1.922287] ti-qspi 4b300000.spi: tx cmd 003a0006 dc 00000000 data 9f
247
[    1.922297] ti-qspi 4b300000.spi: rx cmd 00390006 dc 00000000
248
[    1.922305] ti-qspi 4b300000.spi: rx cmd 00390006 dc 00000000
249
[    1.922313] ti-qspi 4b300000.spi: rx cmd 00390006 dc 00000000
250
[    1.922321] ti-qspi 4b300000.spi: rx cmd 00390006 dc 00000000
251
[    1.922328] ti-qspi 4b300000.spi: rx cmd 00390006 dc 00000000
252
[    1.922335] ti-qspi 4b300000.spi: rx cmd 00390006 dc 00000000
253
[    1.922350] m25p80 spi0.0: found n25q256ax1, expected s25fl256s1
254
[    1.928602] ti-qspi 4b300000.spi: tx cmd 003a0000 dc 00000000 data 06
255
[    1.928627] ti-qspi 4b300000.spi: tx cmd 003a0000 dc 00000000 data b7
256
[    1.928647] ti-qspi 4b300000.spi: tx cmd 003a0000 dc 00000000 data 04
257
[    1.928658] m25p80 spi0.0: n25q256ax1 (32768 Kbytes)
258
[    1.933753] 7 fixed-partitions partitions found on MTD device spi0.0
259
[    1.940134] Creating 7 MTD partitions on "spi0.0":
260
[    1.944977] 0x000000000000-0x000000040000 : "QSPI.SPL"
261
[    1.950860] 0x000000040000-0x000000140000 : "QSPI.u-boot"
262
[    1.957013] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os"
263
[    1.963765] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env"
264
[    1.970221] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1"
265
[    1.977412] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel"
266
[    1.983542] 0x0000009e0000-0x000002000000 : "QSPI.file-system"
267
[    1.990127] ti-qspi 4b300000.spi: registered child spi0.0
268
[    1.990656] mdio_bus fixed-0: GPIO lookup for consumer reset
269
[    1.990664] mdio_bus fixed-0: using lookup tables for GPIO lookup
270
[    1.990671] mdio_bus fixed-0: No GPIO consumer reset found
271
[    1.990696] libphy: Fixed MDIO Bus: probed
272
[    1.998459] mdio_bus 48485000.mdio: GPIO lookup for consumer reset
273
[    1.998467] mdio_bus 48485000.mdio: using device tree for GPIO lookup
274
[    1.998485] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/ethernet@48484000/mdio@48485000[0]'
275
[    1.998500] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/ethernet@48484000/mdio@48485000[0]'
276
[    1.998508] mdio_bus 48485000.mdio: using lookup tables for GPIO lookup
277
[    1.998515] mdio_bus 48485000.mdio: No GPIO consumer reset found
278
[    2.051770] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000
279
[    2.059464] libphy: 48485000.mdio: probed
280
[    2.065710] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/ethernet@48484000/mdio@48485000/ethernet-p'
281
[    2.068242] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/ethernet@48484000/mdio@48485000/ethernet-p'
282
[    2.068414] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY
283
[    2.078137] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver Micrel KSZ9031 Gigabit PHY
284
[    2.088422] cpsw 48484000.ethernet: Detected MACID = f8:33:31:74:d3:66
285
[    2.095063] cpsw 48484000.ethernet: initialized cpsw ale version 1.4
286
[    2.101447] cpsw 48484000.ethernet: ALE Table size 1024
287
[    2.106763] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies)
288
[    2.114766] cpsw 48484000.ethernet: cpsw: Detected MACID = f8:33:31:74:d3:67
289
[    2.123075] i2c /dev entries driver
290
[    2.128444] gpio-fan gpio_fan: GPIO lookup for consumer alarm
291
[    2.128451] gpio-fan gpio_fan: using device tree for GPIO lookup
292
[    2.128467] of_get_named_gpiod_flags: can't parse 'alarm-gpios' property of node '/gpio_fan[0]'
293
[    2.128481] of_get_named_gpiod_flags: can't parse 'alarm-gpio' property of node '/gpio_fan[0]'
294
[    2.128489] gpio-fan gpio_fan: using lookup tables for GPIO lookup
295
[    2.128497] gpio-fan gpio_fan: No GPIO consumer alarm found
296
[    2.128510] gpio-fan gpio_fan: GPIO lookup for consumer (null)
297
[    2.128516] gpio-fan gpio_fan: using device tree for GPIO lookup
298
[    2.128540] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_fan[0]' - status (0)
299
[    2.128549] no flags found for (null)
300
[    2.129721] gpio-fan gpio_fan: GPIO fan initialized
301
[    2.165545] cpu cpu0: Linked as a consumer to regulator.6
302
[    2.171057] cpu cpu0: Linked as a consumer to regulator.29
303
[    2.178231] sdhci: Secure Digital Host Controller Interface driver
304
[    2.184555] sdhci: Copyright(c) Pierre Ossman
305
[    2.190275] sdhci-pltfm: SDHCI platform and OF driver helper
306
[    2.196563] sdhci-omap 4809c000.mmc: GPIO lookup for consumer cd
307
[    2.196568] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup
308
[    2.196587] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0)
309
[    2.196616] gpio gpiochip5: Persistence not supported for GPIO 27
310
[    2.196625] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)
311
[    2.205478] sdhci-omap 4809c000.mmc: Got CD GPIO
312
[    2.210118] sdhci-omap 4809c000.mmc: GPIO lookup for consumer wp
313
[    2.210122] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup
314
[    2.210132] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]'
315
[    2.210142] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]'
316
[    2.210147] sdhci-omap 4809c000.mmc: using lookup tables for GPIO lookup
317
[    2.210152] sdhci-omap 4809c000.mmc: No GPIO consumer wp found
318
[    2.210276] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.28
319
[    2.217316] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13
320
[    2.224474] sdhci-omap 4809c000.mmc: Dropping the link to regulator.13
321
[    2.231078] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.2
322
[    2.238034] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13
323
[    2.245268] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode
324
[    2.277786] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA
325
[    2.285199] sdhci-omap 480b4000.mmc: GPIO lookup for consumer wp
326
[    2.285206] sdhci-omap 480b4000.mmc: using device tree for GPIO lookup
327
[    2.285220] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]'
328
[    2.285232] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]'
329
[    2.285239] sdhci-omap 480b4000.mmc: using lookup tables for GPIO lookup
330
[    2.285246] sdhci-omap 480b4000.mmc: No GPIO consumer wp found
331
[    2.285517] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.5
332
[    2.292334] sdhci-omap 480b4000.mmc: Dropping the link to regulator.5
333
[    2.298896] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2
334
[    2.305817] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.5
335
[    2.312784] sdhci-omap 480b4000.mmc: Cannot get pinctrl
336
[    2.318093] sdhci-omap 480b4000.mmc: Dropping the link to regulator.5
337
[    2.324614] sdhci-omap 480b4000.mmc: Dropping the link to regulator.2
338
[    2.331987] ledtrig-cpu: registered to indicate activity on CPUs
339
[    2.340319] ad799x 4-0029: Linked as a consumer to regulator.2
340
[    2.346236] ad799x 4-0029: 4-0029 supply vref not found, using dummy regulator
341
[    2.353538] ad799x 4-0029: Linked as a consumer to regulator.0
342
[    2.361825] NET: Registered protocol family 10
343
[    2.366934] Segment Routing with IPv6
344
[    2.368396] mmc0: host does not support reading read-only switch, assuming write-enable
345
[    2.370653] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
346
[    2.383766] mmc0: new high speed SDHC card at address aaaa
347
[    2.384958] NET: Registered protocol family 17
348
[    2.394742] Key type dns_resolver registered
349
[    2.399151] Registering SWP/SWPB emulation handler
350
[    2.400698] mmcblk0: mmc0:aaaa SC32G 29.7 GiB 
351
[    2.403980] omap_voltage_late_init: Voltage driver support not added
352
[    2.414862] Power Management for TI OMAP4+ devices.
353
[    2.420249] Loading compiled-in X.509 certificates
354
[    2.428902]  mmcblk0: p1 p2
355
[    2.443224] dmm 4e000000.dmm: workaround for errata i878 in use
356
[    2.450471] dmm 4e000000.dmm: initialized all PAT entries
357
[    2.456834] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15
358
[    2.464340] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15
359
[    2.471868] tpd12s015 encoder@0: GPIO lookup for consumer (null)
360
[    2.471873] tpd12s015 encoder@0: using device tree for GPIO lookup
361
[    2.471885] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/encoder@0[0]'
362
[    2.471894] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/encoder@0[0]'
363
[    2.471901] tpd12s015 encoder@0: using lookup tables for GPIO lookup
364
[    2.471906] tpd12s015 encoder@0: No GPIO consumer (null) found
365
[    2.471911] tpd12s015 encoder@0: GPIO lookup for consumer (null)
366
[    2.471916] tpd12s015 encoder@0: using device tree for GPIO lookup
367
[    2.471924] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/encoder@0[1]'
368
[    2.471933] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/encoder@0[1]'
369
[    2.471938] tpd12s015 encoder@0: using lookup tables for GPIO lookup
370
[    2.471943] tpd12s015 encoder@0: No GPIO consumer (null) found
371
[    2.471948] tpd12s015 encoder@0: GPIO lookup for consumer (null)
372
[    2.471952] tpd12s015 encoder@0: using device tree for GPIO lookup
373
[    2.471970] of_get_named_gpiod_flags: parsed 'gpios' property of node '/encoder@0[2]' - status (0)
374
[    2.472008] gpio gpiochip6: Persistence not supported for GPIO 12
375
[    2.472653] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15
376
[    2.480398] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)
377
[    2.488410] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops)
378
[    2.497136] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
379
[    2.503798] [drm] No driver support for vblank timestamp query.
380
[    2.651049] [drm] Enabling DMM ywrap scrolling
381
[    2.666345] Console: switching to colour frame buffer device 240x67
382
[    2.682648] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
383
[    2.689158] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0
384
[    2.696759] hctosys: unable to open rtc device (rtc0)
385
[    2.702392] ALSA device list:
386
[    2.705369]   No soundcards found.
387
[    2.738059] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
388
[    2.746249] VFS: Mounted root (ext4 filesystem) on device 179:2.
389
[    2.755970] devtmpfs: mounted
390
[    2.759830] Freeing unused kernel memory: 2048K
391
[    2.764500] Run /sbin/init as init process
392
[    3.071850] systemd[1]: System time before build time, advancing clock.
393
[    3.101039] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPT)
394
[    3.122914] systemd[1]: Detected architecture arm.
395
[    3.164437] systemd[1]: Set hostname to <mitysom-am57x>.
396
[    3.335958] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but t.
397
[    3.353207] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP )
398
[    3.557651] systemd[1]: Created slice system-getty.slice.
399
[    3.592916] systemd[1]: Created slice User and Session Slice.
400
[    3.637276] systemd[1]: Listening on Process Core Dump Socket.
401
[    3.672485] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
402
[    3.711879] systemd[1]: Reached target Swap.
403
[    4.276488] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
404
[    4.789670] systemd-journald[97]: Received request to flush runtime journal from PID 1
405
[    5.854950] net eth0: initializing cpsw version 1.15 (0)
406
[    6.017582] Micrel KSZ9031 Gigabit PHY 48485000.mdio:02: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485)
407
[    6.128262] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
408
[    6.283341] net eth1: initializing cpsw version 1.15 (0)
409
[    6.504689] Micrel KSZ9031 Gigabit PHY 48485000.mdio:03: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485)
410
[    6.573786] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
411
[   10.249431] cpsw 48484000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
412
[   10.258407] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
413
[   33.121775] aic_dvdd: disabling
414
[  109.408712] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
415
[  109.408728] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
416
[  109.408735] spidev spi4.0: spi mode 0
417
[  109.408748] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
418
[  109.408760] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
419
[  109.408766] spidev spi4.0: 8 bits per word
420
[  109.408777] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
421
[  109.408788] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
422
[  109.409233] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
423
[  109.410186] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
424
[  114.755186] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
425
[  114.755205] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
426
[  114.755213] spidev spi4.0: spi mode 0
427
[  114.755226] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
428
[  114.755237] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
429
[  114.755244] spidev spi4.0: 8 bits per word
430
[  114.755255] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
431
[  114.755266] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
432
[  114.755637] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
433
[  114.756553] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
434
[  207.785262] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
435
[  207.785282] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
436
[  207.785289] spidev spi4.0: spi mode 0
437
[  207.785302] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
438
[  207.785313] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
439
[  207.785320] spidev spi4.0: 8 bits per word
440
[  207.785331] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
441
[  207.785341] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
442
[  207.785809] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
443
[  207.786714] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
444
[  586.485298] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
445
[  586.485317] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
446
[  586.485325] spidev spi4.0: spi mode 0
447
[  586.485338] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
448
[  586.485349] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
449
[  586.485356] spidev spi4.0: 8 bits per word
450
[  586.485367] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
451
[  586.485378] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
452
[  586.485830] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
453
[  586.486750] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
454
[  592.865143] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
455
[  592.865161] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
456
[  592.865168] spidev spi4.0: spi mode 0
457
[  592.865181] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
458
[  592.865192] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
459
[  592.865199] spidev spi4.0: 8 bits per word
460
[  592.865211] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
461
[  592.865221] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
462
[  592.865638] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
463
[  592.866543] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
464
[  792.495252] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
465
[  792.495270] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
466
[  792.495278] spidev spi4.0: spi mode 0
467
[  792.495291] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
468
[  792.495301] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
469
[  792.495308] spidev spi4.0: 8 bits per word
470
[  792.495319] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
471
[  792.495330] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
472
[  792.495747] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
473
[  792.496655] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
474
[  794.965099] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
475
[  794.965114] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
476
[  794.965121] spidev spi4.0: spi mode 0
477
[  794.965133] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
478
[  794.965144] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
479
[  794.965151] spidev spi4.0: 8 bits per word
480
[  794.965162] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
481
[  794.965172] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
482
[  794.965538] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
483
[  794.966452] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
484
[  800.365183] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
485
[  800.365201] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
486
[  800.365209] spidev spi4.0: spi mode 0
487
[  800.365222] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
488
[  800.365233] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
489
[  800.365239] spidev spi4.0: 8 bits per word
490
[  800.365251] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
491
[  800.365261] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
492
[  800.365682] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
493
[  800.366599] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
494
[  837.115215] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
495
[  837.115233] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
496
[  837.115241] spidev spi4.0: spi mode 0
497
[  837.115253] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
498
[  837.115265] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
499
[  837.115271] spidev spi4.0: 8 bits per word
500
[  837.115283] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
501
[  837.115293] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
502
[  837.115712] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
503
[  837.116636] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
504
[  858.495230] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
505
[  858.495249] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
506
[  858.495256] spidev spi4.0: spi mode 0
507
[  858.495269] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
508
[  858.495280] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
509
[  858.495287] spidev spi4.0: 8 bits per word
510
[  858.495298] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
511
[  858.495309] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
512
[  858.495684] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
513
[  858.496598] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
514
[  863.125179] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
515
[  863.125198] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
516
[  863.125205] spidev spi4.0: spi mode 0
517
[  863.125218] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
518
[  863.125229] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
519
[  863.125235] spidev spi4.0: 8 bits per word
520
[  863.125247] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
521
[  863.125257] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
522
[  863.125678] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
523
[  863.126609] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
524
[  890.325253] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
525
[  890.325271] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
526
[  890.325278] spidev spi4.0: spi mode 0
527
[  890.325291] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
528
[  890.325302] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
529
[  890.325309] spidev spi4.0: 8 bits per word
530
[  890.325321] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
531
[  890.325331] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
532
[  890.325706] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
533
[  890.326629] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
534
[  895.025133] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
535
[  895.025150] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
536
[  895.025157] spidev spi4.0: spi mode 0
537
[  895.025170] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
538
[  895.025181] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
539
[  895.025188] spidev spi4.0: 8 bits per word
540
[  895.025200] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
541
[  895.025210] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
542
[  895.025576] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
543
[  895.026489] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
544
[  896.425041] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
545
[  896.425056] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
546
[  896.425063] spidev spi4.0: spi mode 0
547
[  896.425075] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
548
[  896.425086] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
549
[  896.425093] spidev spi4.0: 8 bits per word
550
[  896.425104] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
551
[  896.425114] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
552
[  896.425516] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
553
[  896.426416] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
554
[  913.615296] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
555
[  913.615314] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
556
[  913.615321] spidev spi4.0: spi mode 0
557
[  913.615335] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
558
[  913.615346] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
559
[  913.615353] spidev spi4.0: 8 bits per word
560
[  913.615364] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
561
[  913.615375] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
562
[  913.615833] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
563
[  913.616737] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
564
[  944.585453] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
565
[  944.585472] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
566
[  944.585479] spidev spi4.0: spi mode 0
567
[  944.585492] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
568
[  944.585503] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
569
[  944.585510] spidev spi4.0: 8 bits per word
570
[  944.585521] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
571
[  944.585532] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
572
[  944.585990] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
573
[  944.586918] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
574
[  979.185214] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
575
[  979.185234] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
576
[  979.185241] spidev spi4.0: spi mode 0
577
[  979.185254] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
578
[  979.185266] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
579
[  979.185273] spidev spi4.0: 8 bits per word
580
[  979.185284] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
581
[  979.185294] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
582
[  979.185711] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
583
[  979.186631] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
584
[ 1030.075278] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
585
[ 1030.075296] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
586
[ 1030.075304] spidev spi4.0: spi mode 0
587
[ 1030.075316] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
588
[ 1030.075328] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
589
[ 1030.075334] spidev spi4.0: 8 bits per word
590
[ 1030.075346] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
591
[ 1030.075356] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
592
[ 1030.075732] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
593
[ 1030.076650] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
594
[ 1077.575288] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
595
[ 1077.575307] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
596
[ 1077.575314] spidev spi4.0: spi mode 0
597
[ 1077.575327] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
598
[ 1077.575338] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
599
[ 1077.575345] spidev spi4.0: 8 bits per word
600
[ 1077.575357] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
601
[ 1077.575367] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
602
[ 1077.575785] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
603
[ 1077.576697] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
604
[ 1091.525218] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
605
[ 1091.525236] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
606
[ 1091.525243] spidev spi4.0: spi mode 0
607
[ 1091.525256] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
608
[ 1091.525268] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
609
[ 1091.525275] spidev spi4.0: 8 bits per word
610
[ 1091.525286] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
611
[ 1091.525296] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
612
[ 1091.525762] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
613
[ 1091.526677] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
614
[ 1108.825459] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
615
[ 1108.825479] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
616
[ 1108.825487] spidev spi4.0: spi mode 0
617
[ 1108.825499] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
618
[ 1108.825510] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
619
[ 1108.825517] spidev spi4.0: 8 bits per word
620
[ 1108.825529] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
621
[ 1108.825539] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
622
[ 1108.825904] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
623
[ 1108.826833] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
624
[ 1113.605164] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
625
[ 1113.605182] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
626
[ 1113.605190] spidev spi4.0: spi mode 0
627
[ 1113.605203] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
628
[ 1113.605213] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
629
[ 1113.605220] spidev spi4.0: 8 bits per word
630
[ 1113.605231] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
631
[ 1113.605241] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
632
[ 1113.605609] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
633
[ 1113.606521] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
634
[ 1129.015162] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
635
[ 1129.015180] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
636
[ 1129.015187] spidev spi4.0: spi mode 0
637
[ 1129.015200] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
638
[ 1129.015210] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
639
[ 1129.015217] spidev spi4.0: 8 bits per word
640
[ 1129.015228] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
641
[ 1129.015239] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
642
[ 1129.015651] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
643
[ 1129.016561] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
644
[ 1135.415458] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
645
[ 1135.415476] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
646
[ 1135.415484] spidev spi4.0: spi mode 0
647
[ 1135.415497] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
648
[ 1135.415508] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
649
[ 1135.415515] spidev spi4.0: 8 bits per word
650
[ 1135.415527] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
651
[ 1135.415536] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
652
[ 1135.415984] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
653
[ 1135.416906] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
654
[ 1152.255236] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
655
[ 1152.255255] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
656
[ 1152.255262] spidev spi4.0: spi mode 0
657
[ 1152.255275] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
658
[ 1152.255286] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
659
[ 1152.255293] spidev spi4.0: 8 bits per word
660
[ 1152.255304] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
661
[ 1152.255315] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
662
[ 1152.255787] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
663
[ 1152.256707] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
664
[ 1177.645481] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
665
[ 1177.645500] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
666
[ 1177.645508] spidev spi4.0: spi mode 0
667
[ 1177.645520] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
668
[ 1177.645531] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
669
[ 1177.645538] spidev spi4.0: 8 bits per word
670
[ 1177.645549] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
671
[ 1177.645561] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
672
[ 1177.645928] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
673
[ 1177.646863] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
674
[ 1186.545215] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
675
[ 1186.545233] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
676
[ 1186.545240] spidev spi4.0: spi mode 0
677
[ 1186.545252] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
678
[ 1186.545264] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
679
[ 1186.545270] spidev spi4.0: 8 bits per word
680
[ 1186.545281] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
681
[ 1186.545292] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
682
[ 1186.545756] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
683
[ 1186.546681] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
684
[ 1213.085199] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
685
[ 1213.085217] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
686
[ 1213.085225] spidev spi4.0: spi mode 0
687
[ 1213.085237] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
688
[ 1213.085249] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
689
[ 1213.085255] spidev spi4.0: 8 bits per word
690
[ 1213.085266] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
691
[ 1213.085277] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
692
[ 1213.085703] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
693
[ 1213.086618] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
694
[ 1219.695175] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
695
[ 1219.695192] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
696
[ 1219.695199] spidev spi4.0: spi mode 0
697
[ 1219.695212] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
698
[ 1219.695223] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
699
[ 1219.695229] spidev spi4.0: 8 bits per word
700
[ 1219.695241] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
701
[ 1219.695251] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
702
[ 1219.695664] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
703
[ 1219.696581] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
704
[ 1232.455192] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
705
[ 1232.455210] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
706
[ 1232.455217] spidev spi4.0: spi mode 0
707
[ 1232.455230] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
708
[ 1232.455241] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
709
[ 1232.455248] spidev spi4.0: 8 bits per word
710
[ 1232.455259] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
711
[ 1232.455269] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
712
[ 1232.455735] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
713
[ 1232.456648] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
714
[ 1238.065158] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
715
[ 1238.065175] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
716
[ 1238.065183] spidev spi4.0: spi mode 0
717
[ 1238.065196] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
718
[ 1238.065207] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
719
[ 1238.065214] spidev spi4.0: 8 bits per word
720
[ 1238.065226] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
721
[ 1238.065236] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
722
[ 1238.065603] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
723
[ 1238.066519] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
724
[ 1358.145306] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
725
[ 1358.145324] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
726
[ 1358.145332] spidev spi4.0: spi mode 0
727
[ 1358.145344] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
728
[ 1358.145356] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
729
[ 1358.145362] spidev spi4.0: 8 bits per word
730
[ 1358.145373] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
731
[ 1358.145384] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
732
[ 1358.145804] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
733
[ 1358.146723] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
734
[ 1366.155190] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
735
[ 1366.155208] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
736
[ 1366.155215] spidev spi4.0: spi mode 0
737
[ 1366.155228] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
738
[ 1366.155239] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
739
[ 1366.155246] spidev spi4.0: 8 bits per word
740
[ 1366.155257] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
741
[ 1366.155267] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
742
[ 1366.155683] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
743
[ 1366.156601] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
744
[ 1417.185289] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
745
[ 1417.185309] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
746
[ 1417.185316] spidev spi4.0: spi mode 0
747
[ 1417.185329] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
748
[ 1417.185340] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
749
[ 1417.185346] spidev spi4.0: 8 bits per word
750
[ 1417.185358] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
751
[ 1417.185369] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
752
[ 1417.185734] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
753
[ 1417.186656] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
754
[ 1421.885192] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
755
[ 1421.885209] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
756
[ 1421.885216] spidev spi4.0: spi mode 0
757
[ 1421.885229] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
758
[ 1421.885240] spidev spi4.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
759
[ 1421.885247] spidev spi4.0: 8 bits per word
760
[ 1421.885258] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
761
[ 1421.885269] spidev spi4.0: setup mode 0, 8 bits/w, 500000 Hz max --> 0
762
[ 1421.885639] spidev spi4.0: setup: speed 500000, sample leading edge, clk normal
763
[ 1421.886575] spidev spi4.0: setup: speed 1000000, sample leading edge, clk normal
764

    
    (1-1/1)
    Go to top
    Add picture from clipboard (Maximum size: 1 GB)