1
|
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
|
2
|
usb-storage: GetMaxLUN command result is 1, data is 2
|
3
|
usb-storage: queuecommand_lck called
|
4
|
usb-storage: *** thread awakened.
|
5
|
usb-storage: Command INQUIRY (6 bytes)
|
6
|
usb-storage: 12 00 00 00 24 00
|
7
|
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
|
8
|
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
|
9
|
usb-storage: Status code 0; transferred 31/31
|
10
|
usb-storage: Status code 0; transferred 31/31
|
11
|
usb-storage: -- transfer complete
|
12
|
usb-storage: Bulk command transfer result=0
|
13
|
usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
|
14
|
hub 2-0:1.0: hub_suspend
|
15
|
usb usb2: bus auto-suspend, wakeup 1
|
16
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
17
|
hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
|
18
|
usb 1-1: USB disconnect, device number 2
|
19
|
usb 1-1: unregistering device
|
20
|
usb 1-1: unregistering interface 1-1:1.0
|
21
|
usb-storage: storage_disconnect() called
|
22
|
udc_core: exports duplicate symbol usb_add_gadget_udc (owned by kernel)
|
23
|
usb-storage: command_abort called
|
24
|
usb-storage: usb_stor_stop_transport called
|
25
|
usb-storage: -- cancelling sg request
|
26
|
usb_rx_ch_teardown 1094: teardown Desc not found
|
27
|
usb-storage: Status code -104; transferred 0/36
|
28
|
usb-storage: -- transfer cancelled
|
29
|
usb-storage: Bulk data transfer result 0x4
|
30
|
usb-storage: -- command was aborted
|
31
|
usb-storage: unable to lock device for reset: -19
|
32
|
usb-storage: usb_stor_Bulk_reset called
|
33
|
usb-storage: usb_stor_Bulk_reset called
|
34
|
usb-storage: No reset during disconnect
|
35
|
usb-storage: scsi command aborted
|
36
|
usb-storage: *** thread sleeping.
|
37
|
PHY: 0:03 - Link is Up - 100/Full
|
38
|
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
|
39
|
usb-storage: queuecommand_lck called
|
40
|
usb-storage: Fail command during disconnect
|
41
|
usb-storage: device_reset called
|
42
|
usb-storage: usb_stor_Bulk_reset called
|
43
|
usb-storage: No reset during disconnect
|
44
|
usb-storage: bus_reset called
|
45
|
usb-storage: unable to lock device for reset: -19
|
46
|
scsi 1:0:0:0: Device offlined - not ready after error recovery
|
47
|
usb-storage: queuecommand_lck called
|
48
|
usb-storage: Fail command during disconnect
|
49
|
usb-storage: queuecommand_lck called
|
50
|
usb-storage: Fail command during disconnect
|
51
|
usb-storage: queuecommand_lck called
|
52
|
usb-storage: Fail command during disconnect
|
53
|
usb-storage: queuecommand_lck called
|
54
|
usb-storage: Fail command during disconnect
|
55
|
usb-storage: queuecommand_lck called
|
56
|
usb-storage: queuecommand_lck called
|
57
|
usb-storage: Fail command during disconnect
|
58
|
usb-storage: queuecommand_lck called
|
59
|
usb-storage: Fail command during disconnect
|
60
|
usb-storage: queuecommand_lck called
|
61
|
usb-storage: Fail command during disconnect
|
62
|
usb-storage 1-1:1.0: scan complete
|
63
|
usb-storage: -- usb_stor_release_resources
|
64
|
usb-storage: -- sending exit command to thread
|
65
|
usb-storage: *** thread awakened.
|
66
|
usb-storage: -- exiting
|
67
|
usb-storage: -- dissociate_dev
|
68
|
usb 1-1: usb_disable_device nuking all URBs
|
69
|
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
|
70
|
usb 1-1: new high-speed USB device number 3 using musb-hdrc
|
71
|
usb 1-1: default language 0x0409
|
72
|
usb 1-1: udev 3, busnum 1, minor = 2
|
73
|
usb 1-1: New USB device found, idVendor=8564, idProduct=4000
|
74
|
usb 1-1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
|
75
|
usb 1-1: Product: GL3220
|
76
|
usb 1-1: Manufacturer: Genesys
|
77
|
usb 1-1: SerialNumber: 000000059
|
78
|
usb 1-1: usb_probe_device
|
79
|
usb 1-1: configuration #1 chosen from 1 choice
|
80
|
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
|
81
|
uas 1-1:1.0: usb_probe_interface
|
82
|
uas 1-1:1.0: usb_probe_interface - got id
|
83
|
usb-storage 1-1:1.0: usb_probe_interface
|
84
|
usb-storage 1-1:1.0: usb_probe_interface - got id
|
85
|
usb-storage: USB Mass Storage device detected
|
86
|
usb-storage: -- associate_dev
|
87
|
usb-storage: Vendor: 0x8564, Product: 0x4000, Revision: 0x0008
|
88
|
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
|
89
|
usb-storage: Transport: Bulk
|
90
|
usb-storage: Protocol: Transparent SCSI
|
91
|
scsi2 : usb-storage 1-1:1.0
|
92
|
usb-storage: *** thread sleeping.
|
93
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
94
|
hub 1-0:1.0: port 1 enable change, status 00000503
|
95
|
usb-storage 1-1:1.0: device found
|
96
|
usb-storage 1-1:1.0: waiting for device to settle before scanning
|
97
|
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
|
98
|
usb-storage: GetMaxLUN command result is 1, data is 2
|
99
|
usb-storage: queuecommand_lck called
|
100
|
usb-storage: *** thread awakened.
|
101
|
usb-storage: Command INQUIRY (6 bytes)
|
102
|
usb-storage: 12 00 00 00 24 00
|
103
|
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
|
104
|
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
|
105
|
eth0: no IPv6 routers present
|
106
|
usb-storage: command_abort called
|
107
|
usb-storage: usb_stor_stop_transport called
|
108
|
usb-storage: -- cancelling URB
|
109
|
usb-storage: Status code -104; transferred 0/31
|
110
|
usb-storage: -- transfer cancelled
|
111
|
usb-storage: Bulk command transfer result=4
|
112
|
usb-storage: -- command was aborted
|
113
|
usb-storage: usb_stor_pre_reset
|
114
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
115
|
usb 1-1: reset high-speed USB device number 3 using musb-hdrc
|
116
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
117
|
usb-storage: usb_stor_post_reset
|
118
|
usb-storage: usb_reset_device returns 0
|
119
|
usb-storage: scsi command aborted
|
120
|
usb-storage: queuecommand_lck called
|
121
|
usb-storage: *** thread sleeping.
|
122
|
usb-storage: *** thread awakened.
|
123
|
usb-storage: Command TEST_UNIT_READY (6 bytes)
|
124
|
usb-storage: 00 00 00 00 00 00
|
125
|
usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
|
126
|
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
|
127
|
usb-storage: command_abort called
|
128
|
usb-storage: usb_stor_stop_transport called
|
129
|
usb-storage: -- cancelling URB
|
130
|
usb-storage: Status code -104; transferred 0/31
|
131
|
usb-storage: -- transfer cancelled
|
132
|
usb-storage: Bulk command transfer result=4
|
133
|
usb-storage: -- command was aborted
|
134
|
usb-storage: usb_stor_pre_reset
|
135
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
136
|
usb 1-1: reset high-speed USB device number 3 using musb-hdrc
|
137
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
138
|
usb-storage: usb_stor_post_reset
|
139
|
usb-storage: usb_reset_device returns 0
|
140
|
usb-storage: scsi command aborted
|
141
|
usb-storage: device_reset called
|
142
|
usb-storage: usb_stor_Bulk_reset called
|
143
|
usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
|
144
|
usb-storage: *** thread sleeping.
|
145
|
usb-storage: Soft reset: clearing bulk-in endpoint halt
|
146
|
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0
|
147
|
usb-storage: usb_stor_clear_halt: result = 0
|
148
|
usb-storage: Soft reset: clearing bulk-out endpoint halt
|
149
|
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0
|
150
|
usb-storage: usb_stor_clear_halt: result = 0
|
151
|
usb-storage: Soft reset done
|
152
|
usb-storage: queuecommand_lck called
|
153
|
usb-storage: *** thread awakened.
|
154
|
usb-storage: Command TEST_UNIT_READY (6 bytes)
|
155
|
usb-storage: 00 00 00 00 00 00
|
156
|
usb-storage: Bulk Command S 0x43425355 T 0x3 L 0 F 0 Trg 0 LUN 0 CL 6
|
157
|
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
|
158
|
usb-storage: command_abort called
|
159
|
usb-storage: usb_stor_stop_transport called
|
160
|
usb-storage: -- cancelling URB
|
161
|
usb-storage: Status code -104; transferred 0/31
|
162
|
usb-storage: -- transfer cancelled
|
163
|
usb-storage: Bulk command transfer result=4
|
164
|
usb-storage: -- command was aborted
|
165
|
usb-storage: usb_stor_pre_reset
|
166
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
167
|
usb 1-1: reset high-speed USB device number 3 using musb-hdrc
|
168
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
169
|
usb-storage: usb_stor_post_reset
|
170
|
usb-storage: usb_reset_device returns 0
|
171
|
usb-storage: scsi command aborted
|
172
|
usb-storage: bus_reset called
|
173
|
usb-storage: usb_stor_pre_reset
|
174
|
usb-storage: *** thread sleeping.
|
175
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
176
|
usb 1-1: reset high-speed USB device number 3 using musb-hdrc
|
177
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
178
|
usb-storage: usb_stor_post_reset
|
179
|
usb-storage: usb_reset_device returns 0
|
180
|
usb-storage: queuecommand_lck called
|
181
|
usb-storage: *** thread awakened.
|
182
|
usb-storage: Command TEST_UNIT_READY (6 bytes)
|
183
|
usb-storage: 00 00 00 00 00 00
|
184
|
usb-storage: Bulk Command S 0x43425355 T 0x4 L 0 F 0 Trg 0 LUN 0 CL 6
|
185
|
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
|
186
|
usb-storage: command_abort called
|
187
|
usb-storage: usb_stor_stop_transport called
|
188
|
usb-storage: -- cancelling URB
|
189
|
usb-storage: Status code -104; transferred 0/31
|
190
|
usb-storage: -- transfer cancelled
|
191
|
usb-storage: Bulk command transfer result=4
|
192
|
usb-storage: -- command was aborted
|
193
|
usb-storage: usb_stor_pre_reset
|
194
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
195
|
usb 1-1: reset high-speed USB device number 3 using musb-hdrc
|
196
|
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
|
197
|
usb-storage: usb_stor_post_reset
|
198
|
usb-storage: usb_reset_device returns 0
|
199
|
usb-storage: scsi command aborted
|
200
|
scsi 2:0:0:0: Device offlined - not ready after error recovery
|
201
|
usb-storage: *** thread sleeping.
|
202
|
usb-storage: queuecommand_lck called
|
203
|
usb-storage: *** thread awakened.
|
204
|
usb-storage: Bad target number (1:0)
|
205
|
usb-storage: scsi cmd done, result=0x40000
|
206
|
usb-storage: *** thread sleeping.
|
207
|
usb-storage: queuecommand_lck called
|
208
|
usb-storage: *** thread awakened.
|
209
|
usb-storage: Bad target number (2:0)
|
210
|
usb-storage: scsi cmd done, result=0x40000
|
211
|
usb-storage: *** thread sleeping.
|
212
|
usb-storage: queuecommand_lck called
|
213
|
usb-storage: *** thread awakened.
|
214
|
usb-storage: Bad target number (3:0)
|
215
|
usb-storage: scsi cmd done, result=0x40000
|
216
|
usb-storage: *** thread sleeping.
|
217
|
usb-storage: queuecommand_lck called
|
218
|
usb-storage: *** thread awakened.
|
219
|
usb-storage: Bad target number (4:0)
|
220
|
usb-storage: scsi cmd done, result=0x40000
|
221
|
usb-storage: *** thread sleeping.
|
222
|
usb-storage: queuecommand_lck called
|
223
|
usb-storage: *** thread awakened.
|
224
|
usb-storage: Bad target number (5:0)
|
225
|
usb-storage: scsi cmd done, result=0x40000
|
226
|
usb-storage: *** thread sleeping.
|
227
|
usb-storage: queuecommand_lck called
|
228
|
usb-storage: *** thread awakened.
|
229
|
usb-storage: Bad target number (6:0)
|
230
|
usb-storage: scsi cmd done, result=0x40000
|
231
|
usb-storage: *** thread sleeping.
|
232
|
usb-storage: queuecommand_lck called
|
233
|
usb-storage: *** thread awakened.
|
234
|
usb-storage: Bad target number (7:0)
|
235
|
usb-storage: scsi cmd done, result=0x40000
|
236
|
usb-storage: *** thread sleeping.
|
237
|
usb-storage 1-1:1.0: scan complete
|