Dev Kit Baseboard Schematic and Revision Information¶
The MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON comes with a MitySOM-5CSX module, Basler dart BCON camera(s) as specified, baseboard and the necessary accessories. The schematics are available on this page in a PDF format in order to aid in the development of a custom vision application based on the MitySOM-5CSx and Basler dart BCON camera(s).
The table below is chronological and maps the board part number to the schematic and a brief description of the change from the previous revision.
NOTE: You must have a valid registered account and be logged-in in order to download the schematics.
Altium Design Files: Customers who have purchased the development kit and are designing a custom base board can request the Altium Design Files from Critical Link by e-mailing info@criticallink.com
| Part Number (PCB label) | Description of Change | Schematic | Datasheet | PCN/Errata | Note |
| 80-001038RC-1 A | Initial Revision | N/A | |||
| 80-001038RC-1 C | See Rev 1C ECN List Below | N/A |
- Replace R25 with 110K
- Power switch circuit updated
- Replace M.2 connector with new connector SM3ZS067U410AMR1000
- Connect pins 3 to 10 of U2
- Change R411 to 10K
- Add pem-nuts for 5CSX module mounting
- Change LEDs D1, D401 from SML series to LTST series. Change LED D402 from green SML series to yellow LTST series for obsolescence.
- Change R1, R2, R7, R8 from 1k to 4.7k for I2C.
- Change capacitor C11, C29, C30, C61, C62, C63, C64 from 10V to 16V rating
- PCB in copper changed from 90-000343R-1 to 90-000344R-2
Go to top
