Project

General

Profile

Activity

From 03/02/2024 to 03/31/2024

03/12/2024

06:17 PM PCB Development: RE: Ethernet Connectivity issues with DP83822
Hi,
Okay..will try with DP83822IFRHBR.
Thank you for your support.
With regards
Sandeep S
Sandeep Sivadas
05:09 PM PCB Development: RE: Ethernet Connectivity issues with DP83822
Sandeep Sivadas wrote in message#6594:
> Hi,
>
> Thank you for your prompt support.
>
> Is there any modific...
Jonathan Cormier
04:03 PM PCB Development: RE: Ethernet Connectivity issues with DP83822
Hi,
Thank you for your prompt support.
Is there any modifications to be done in the kernel side for the fiber ...
Sandeep Sivadas
03:37 PM PCB Development: RE: Ethernet Connectivity issues with DP83822
Sandeep Sivadas wrote in message#6592:
> Hi,
>
> The problem is solved now. We removed the 165 ohm resistance co...
Jonathan Cormier
02:58 PM PCB Development: RE: Ethernet Connectivity issues with DP83822
Hi,
The problem is solved now. We removed the 165 ohm resistance connected in the TDP,TDM, RDP and RDM lines. Now ...
Sandeep Sivadas

03/11/2024

02:53 PM PCB Development: RE: Ethernet Connectivity issues with DP83822
> 3. In mux_data.h modified the code as shown below.
Did you also comment out or change the original MCASP2_AXR4 lin...
Jonathan Cormier

03/09/2024

05:43 AM PCB Development: RE: Ethernet Connectivity issues with DP83822
Hi,
I will verify the voltage levels on each lines.
1. For "PRU2MII1RESETn" we are using GPIO 1_4 and modified t...
Sandeep Sivadas

03/07/2024

09:31 PM PCB Development: RE: Ethernet Connectivity issues with DP83822
Sandeep Sivadas wrote in message#6587:
> Q: Do the link lights on the ethernet jack also go on and off?
> Yes....
Jonathan Cormier
04:36 PM PCB Development: RE: Ethernet Connectivity issues with DP83822
Q: Do the link lights on the ethernet jack also go on and off?
Yes. Left side led of RJ45 is go on and off. When...
Sandeep Sivadas
02:41 PM PCB Development: RE: Ethernet Connectivity issues with DP83822
Sandeep Sivadas wrote:
> Hi,
>
> We designed our own custom AM5728 board with two DP83822 PHYs. Desired phy addr...
Jonathan Cormier
11:35 AM PCB Development: Ethernet Connectivity issues with DP83822
Hi,
We designed our own custom AM5728 board with two DP83822 PHYs. Desired phy address are phy0 and phy 1.
In th...
Sandeep Sivadas
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)