Mity CPU Platforms » MitySOM-AM57X

U-Boot SPL 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530)

DRA752-GP ES2.0

no pinctrl state for default mode

** Unable to read file dra7-ipu1-fw.xem4 **

Firmware loading failed

Trying to boot from MMC1

no pinctrl state for default mode

Loading Environment from FAT... *** Warning - bad CRC, using default environment

Loading Environment from MMC... *** Warning - bad CRC, using default environment

U-Boot 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530)

CPU  : DRA752-GP ES2.0

Model: TI AM5748 IDK

Board: MitySOM-57x Dev Kit Non-FPGA

DRAM:  2 GiB

MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1

Loading Environment from FAT... *** Warning - bad CRC, using default environment

Loading Environment from MMC... *** Warning - bad CRC, using default environment

MitySOM-57x - Model No: 5728-PX-4AA-RI Serial No: 21005275 Part Number: 80-001446RI-3A

Warning: fastboot.board_rev: unknown board revision

i2c_write: error waiting for data ACK (status=0x116)

cdce9xx_reg_write: failed for addr:5, ret:-121

board_set_pru_ethaddr

Net:   Could not get PHY for ethernet@48484000: addr 0

Warning: ethernet@48484000 using MAC address from ROM

eth0: ethernet@48484000

Hit any key to stop autoboot:  0 

switch to partitions #0, OK

mmc0 is current device

SD/MMC found on device 0

** Unable to read file boot.scr **

** Unable to read file uEnv.txt **

switch to partitions #0, OK

mmc0 is current device

SD/MMC found on device 0

4461056 bytes read in 196 ms (21.7 MiB/s)

90099 bytes read in 5 ms (17.2 MiB/s)

## Flattened Device Tree blob at 88000000

   Booting using the fdt blob at 0x88000000

   Loading Device Tree to 8ffe7000, end 8ffffff2 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Linux version 4.19.94-yocto-standard (oe-user@oe-host) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architectu4

[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d

[    0.000000] CPU: div instructions available: patching division code

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

[    0.000000] OF: fdt: Machine model: Critical Link MitySOM-AM57x

[    0.000000] Memory policy: Data cache writealloc

[    0.000000] efi: Getting EFI parameters from FDT:

[    0.000000] efi: UEFI not found.

[    0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB

[    0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB

[    0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool

[    0.000000] Reserved memory: created DMA memory pool at 0x000000009d000000, size 32 MiB

[    0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB

[    0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool

[    0.000000] cma: Reserved 128 MiB at 0x00000000f6c00000

[    0.000000] OMAP4: Map 0x00000000fed00000 to (ptrval) for dram barrier

[    0.000000] DRA752 ES2.0

[    0.000000] random: get_random_bytes called from start_kernel+0xb4/0x470 with crng_init=0

[    0.000000] percpu: Embedded 15 pages/cpu s32396 r8192 d20852 u61440

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 460096

[    0.000000] Kernel command line: console=ttyS2,115200n8 cma=128MB drm.edid_firmware=edid/1920x1080.bin video=HDMI-A-1:1920x1080 rt

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Memory: 1550312K/1847296K available (10240K kernel code, 336K rwdata, 2820K rodata, 2048K init, 272K bss, 34840K rese)

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)

[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)

[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)

[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 337 kB)

[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 273 kB)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[    0.000000] rcu: Preemptible hierarchical RCU implementation.

[    0.000000]  Tasks RCU enabled.

[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

[    0.000000] GIC: Using split EOI/Deactivate mode

[    0.000000] OMAP clockevent source: timer1 at 32786 Hz

[    0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys).

[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns

[    0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns

[    0.000019] Switching to timer-based delay loop, resolution 162ns

[    0.000295] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns

[    0.000305] OMAP clocksource: 32k_counter at 32768 Hz

[    0.000764] Console: colour dummy device 80x30

[    0.000808] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)

[    0.000824] pid_max: default: 32768 minimum: 301

[    0.000945] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000960] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.001516] CPU: Testing write buffer coherency: ok

[    0.001550] CPU0: Spectre v2: using ICIALLU workaround

[    0.001762] /cpus/cpu@0 missing clock-frequency property

[    0.001781] /cpus/cpu@1 missing clock-frequency property

[    0.001795] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[    0.059918] Setting up static identity map for 0x80200000 - 0x80200060

[    0.079929] rcu: Hierarchical SRCU implementation.

[    0.100121] EFI services will not be available.

[    0.119992] smp: Bringing up secondary CPUs ...

[    0.200379] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[    0.200385] CPU1: Spectre v2: using ICIALLU workaround

[    0.200509] smp: Brought up 1 node, 2 CPUs

[    0.200521] SMP: Total of 2 processors activated (24.59 BogoMIPS).

[    0.200529] CPU: All CPU(s) started in HYP mode.

[    0.200537] CPU: Virtualization extensions available.

[    0.201102] devtmpfs: initialized

[    0.218313] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0

[    0.218565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.218583] futex hash table entries: 512 (order: 3, 32768 bytes)

[    0.222875] pinctrl core: initialized pinctrl subsystem

[    0.223395] DMI not present or invalid.

[    0.223669] NET: Registered protocol family 16

[    0.224867] DMA: preallocated 256 KiB pool for atomic coherent allocations

[    0.225781] omap_hwmod: l3_main_2 using broken dt data from ocp

[    0.418487] cpuidle: using governor ladder

[    0.418521] cpuidle: using governor menu

[    0.428590] OMAP GPIO hardware version 0.1

[    0.453994] No ATAGs?

[    0.454068] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[    0.454084] hw-breakpoint: maximum watchpoint size is 8 bytes.

[    0.454924] OMAP DMA hardware revision 0.0

[    0.466668] edma 43300000.edma: memcpy is disabled

[    0.470079] edma 43300000.edma: TI EDMA DMA engine driver

[    0.477282] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)

[    0.563143] omap-iommu 40d01000.mmu: 40d01000.mmu registered

[    0.563330] omap-iommu 40d02000.mmu: 40d02000.mmu registered

[    0.563575] omap-iommu 58882000.mmu: 58882000.mmu registered

[    0.563809] omap-iommu 55082000.mmu: 55082000.mmu registered

[    0.564189] omap-iommu 41501000.mmu: 41501000.mmu registered

[    0.564369] omap-iommu 41502000.mmu: 41502000.mmu registered

[    0.564652] iommu: Adding device 58820000.ipu to group 1

[    0.564731] iommu: Adding device 55020000.ipu to group 2

[    0.564857] iommu: Adding device 40800000.dsp to group 0

[    0.565081] iommu: Adding device 41000000.dsp to group 3

[    0.566325] SCSI subsystem initialized

[    0.567367] palmas 0-0058: Irq flag is 0x00000008

[    0.593533] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0

[    0.595169] SMPS12: supplied by regulator-dummy

[    0.596790] SMPS3: supplied by VMAIN

[    0.598282] SMPS45: supplied by regulator-dummy

[    0.600013] SMPS6: supplied by VMAIN

[    0.601618] SMPS7: supplied by VMAIN

[    0.603360] SMPS8: supplied by VMAIN

[    0.604793] random: fast init done

[    0.604977] SMPS9: supplied by VMAIN

[    0.605885] LDO1: supplied by VMAIN

[    0.621225] LDO2: supplied by VMAIN

[    0.631231] LDO3: supplied by VMAIN

[    0.641241] LDO4: supplied by VMAIN

[    0.641900] LDO5: supplied by regulator-dummy

[    0.642569] LDO6: supplied by regulator-dummy

[    0.643233] LDO7: supplied by regulator-dummy

[    0.643894] LDO8: supplied by regulator-dummy

[    0.644554] LDO9: supplied by VMAIN

[    0.651556] LDOLN: supplied by VMAIN

[    0.661276] LDOUSB: supplied by VMAIN

[    0.673753] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz

[    0.674682] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz

[    0.674884] media: Linux media interface: v0.10

[    0.674924] videodev: Linux video capture interface: v2.00

[    0.675003] pps_core: LinuxPPS API ver. 1 registered

[    0.675012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.675033] PTP clock support registered

[    0.675062] EDAC MC: Ver: 3.0.0

[    0.675836] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400

[    0.676089] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400

[    0.680888] Advanced Linux Sound Architecture Driver Initialized.

[    0.681709] clocksource: Switched to clocksource arch_sys_counter

[    0.689884] NET: Registered protocol family 2

[    0.690471] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)

[    0.690501] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[    0.690564] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[    0.690690] TCP: Hash tables configured (established 8192 bind 8192)

[    0.690916] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.690952] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.691085] NET: Registered protocol family 1

[    0.711518] RPC: Registered named UNIX socket transport module.

[    0.711529] RPC: Registered udp transport module.

[    0.711537] RPC: Registered tcp transport module.

[    0.711545] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.712650] hw perfevents: no interrupt-affinity property for /pmu, guessing.

[    0.712845] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available

[    0.713833] Initialise system trusted keyrings

[    0.713962] workingset: timestamp_bits=14 max_order=19 bucket_order=5

[    0.719021] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    0.729518] NFS: Registering the id_resolver key type

[    0.729542] Key type id_resolver registered

[    0.729552] Key type id_legacy registered

[    0.729593] ntfs: driver 2.1.32 [Flags: R/O].

[    0.731268] Key type asymmetric registered

[    0.731281] Asymmetric key parser 'x509' registered

[    0.731329] bounce: pool size: 64 pages

[    0.731362] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)

[    0.731373] io scheduler noop registered

[    0.731382] io scheduler deadline registered

[    0.731481] io scheduler cfq registered (default)

[    0.731491] io scheduler mq-deadline registered

[    0.731501] io scheduler kyber registered

[    0.737324] pinctrl-single 4a003400.pinmux: 282 pins, size 1128

[    0.744751] V3_3D: supplied by smps9

[    0.744988] aic_dvdd: supplied by V3_3D

[    0.745051] vtt_fixed: supplied by V3_3D

[    0.791562] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled

[    0.795118] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 43, base_baud = 3000000) is a 8250

[    0.796063] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 44, base_baud = 3000000) is a 8250

[    1.774715] console [ttyS2] enabled

[    1.779142] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 45, base_baud = 3000000) is a 8250

[    1.790040] omap_rng 48090000.rng: Random Number Generator ver. 20

[    1.790591] random: crng init done

[    1.799866] omapdss_dss 58000000.dss: Linked as a consumer to regulator.22

[    1.806916] DSS: OMAP DSS rev 6.1

[    1.813253] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15

[    1.820760] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15

[    1.841105] brd: module loaded

[    1.850462] loop: module loaded

[    1.859408] m25p80 spi0.0: found n25q256ax1, expected s25fl256s1

[    1.865754] m25p80 spi0.0: n25q256ax1 (32768 Kbytes)

[    1.870809] 7 fixed-partitions partitions found on MTD device spi0.0

[    1.877235] Creating 7 MTD partitions on "spi0.0":

[    1.882074] 0x000000000000-0x000000040000 : "QSPI.SPL"

[    1.887953] 0x000000040000-0x000000140000 : "QSPI.u-boot"

[    1.894103] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os"

[    1.900808] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env"

[    1.907289] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1"

[    1.914481] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel"

[    1.920569] 0x0000009e0000-0x000002000000 : "QSPI.file-system"

[    1.927762] libphy: Fixed MDIO Bus: probed

[    1.935122] i2c /dev entries driver

[    1.941784] gpio-fan gpio_fan: GPIO fan initialized

[    1.975447] cpu cpu0: Linked as a consumer to regulator.6

[    1.980954] cpu cpu0: Linked as a consumer to regulator.29

[    1.988124] sdhci: Secure Digital Host Controller Interface driver

[    1.994404] sdhci: Copyright(c) Pierre Ossman

[    1.999928] sdhci-pltfm: SDHCI platform and OF driver helper

[    2.006271] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)

[    2.015125] sdhci-omap 4809c000.mmc: Got CD GPIO

[    2.019925] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.28

[    2.026967] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13

[    2.034123] sdhci-omap 4809c000.mmc: Dropping the link to regulator.13

[    2.040728] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.2

[    2.047678] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13

[    2.054859] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode

[    2.087324] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA

[    2.094863] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2

[    2.101660] sdhci-omap 480b4000.mmc: Dropping the link to regulator.2

[    2.108232] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2

[    2.115150] sdhci-omap 480b4000.mmc: Cannot get pinctrl

[    2.122328] ledtrig-cpu: registered to indicate activity on CPUs

[    2.130858] ad799x 4-0029: Linked as a consumer to regulator.2

[    2.136828] ad799x 4-0029: 4-0029 supply vref not found, using dummy regulator

[    2.144187] ad799x 4-0029: Linked as a consumer to regulator.0

[    2.152448] NET: Registered protocol family 10

[    2.157417] Segment Routing with IPv6

[    2.161132] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

[    2.167621] NET: Registered protocol family 17

[    2.172368] Key type dns_resolver registered

[    2.176881] Registering SWP/SWPB emulation handler

[    2.181769] omap_voltage_late_init: Voltage driver support not added

[    2.188206] Power Management for TI OMAP4+ devices.

[    2.193739] Loading compiled-in X.509 certificates

[    2.202683] mmc0: host does not support reading read-only switch, assuming write-enable

[    2.212896] mmc0: new high speed SDHC card at address 59b4

[    2.219567] dmm 4e000000.dmm: workaround for errata i878 in use

[    2.226863] dmm 4e000000.dmm: initialized all PAT entries

[    2.229057] mmcblk0: mmc0:59b4 EB2MW 29.8 GiB 

[    2.233324] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15

[    2.244276] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15

[    2.252719] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15

[    2.260540] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)

[    2.268591] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops)

[    2.276696]  mmcblk0: p1 p2

[    2.277482] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    2.286197] [drm] No driver support for vblank timestamp query.

[    2.433607] [drm] Enabling DMM ywrap scrolling

[    2.451352] Console: switching to colour frame buffer device 240x67

[    2.469803] omapdrm omapdrm.0: fb0: omapdrm frame buffer device

[    2.476948] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0

[    2.484556] hctosys: unable to open rtc device (rtc0)

[    2.490169] ALSA device list:

[    2.493177]   No soundcards found.

[    2.847298] EXT4-fs (mmcblk0p2): recovery complete

[    2.864033] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[    2.872337] VFS: Mounted root (ext4 filesystem) on device 179:2.

[    2.879766] devtmpfs: mounted

[    2.883871] Freeing unused kernel memory: 2048K

[    2.888551] Run /sbin/init as init process

[    3.244960] systemd[1]: System time before build time, advancing clock.

[    3.276276] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPT)

[    3.298432] systemd[1]: Detected architecture arm.

Welcome to Arago 2019.11!

[    3.332782] systemd[1]: Set hostname to <mitysom-am57x>.

[    3.565526] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but t.

[    3.582731] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP )

[    3.862785] systemd[1]: Reached target Remote File Systems.

[  OK  ] Reached target Remote File Systems.

[    3.908211] systemd[1]: Listening on Process Core Dump Socket.

[  OK  ] Listening on Process Core Dump Socket.

[    3.942060] systemd[1]: Listening on initctl Compatibility Named Pipe.

[  OK  ] Listening on initctl Compatibility Named Pipe.

[    3.982214] systemd[1]: Listening on Journal Socket.

[  OK  ] Listening on Journal Socket.

[    4.012357] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[  OK  ] Started Dispatch Password Requests to Console Directory Watch.

         Mounting Kernel Debug File System...

[  OK  ] Created slice system-getty.slice.

[  OK  ] Started Forward Password Requests to Wall Directory Watch.

[  OK  ] Reached target Paths.

[  OK  ] Listening on Journal Socket (/dev/log).

         Mounting POSIX Message Queue File System...

[  OK  ] Created slice User and Session Slice.

[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.

         Starting Load Kernel Modules...

[  OK  ] Listening on Network Service Netlink Socket.

[    4.356836] cmemk: loading out-of-tree module taints kernel.

[  OK  ] Listening on udev Kernel Socket.

[    4.364476] CMEMK module: reference Linux version 4.19.94

[    4.374383] allocated heap buffer 0x40500000 of size 0x100000

[    4.380209] cmemk initialized

[[    4.392518] cryptodev: driver 1.9 loaded.

  OK  ] Listening on udev Control Socket.

         Starting udev Coldplug all Devices...

         Starting Journal Service...

[  OK  ] Reached target Swap.

[  OK  ] Reached target Slices.

         Starting Remount Root and Kernel File Systems...

[    4.584215] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[  OK  ] Created slice system-serial\x2dgetty.slice.

         Mounting Temporary Directory (/tmp)...

[  OK  ] Started Journal Service.

[  OK  ] Mounted Kernel Debug File System.

[  OK  ] Mounted POSIX Message Queue File System.

[  OK  ] Started Load Kernel Modules.

[  OK  ] Started Remount Root and Kernel File Systems.

[  OK  ] Mounted Temporary Directory (/tmp).

         Starting Create Static Device Nodes in /dev...

         Starting Apply Kernel Variables...

         Mounting Kernel Configuration File System...

         Starting Flush Journal to Persistent Storage...

[  OK  ] Started Create Static Device Nodes in /dev.

[  OK  ] Started Apply Kernel Variables.

[  OK  ] Mounted Kernel Configuration File System.

[    5.070290] systemd-journald[99]: Received request to flush runtime journal from PID 1

[  OK  ] Reached target Local File Systems (Pre).

         Mounting /media/ram...

[  OK  ] Reached target Containers.

         Mounting /var/volatile...

         Starting udev Kernel Device Manager...

[  OK  ] Started Flush Journal to Persistent Storage.

[  OK  ] Mounted /media/ram.

[  OK  ] Started udev Coldplug all Devices.

[  OK  ] Started udev Kernel Device Manager.

[  OK  ] Mounted /var/volatile.

         Starting Load/Save Random Seed...

[  OK  ] Reached target Local File Systems.

         Starting Create Volatile Files and Directories...

[  OK  ] Started Load/Save Random Seed.

[  OK  ] Started Create Volatile Files and Directories.

[    5.535341] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver

         Starting Update UTMP about System Boot/Shutdown...

[    5.564882] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver

         Starting Network Service...

[    5.598122] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000

         Starting Network Time Synchronization...

[    5.635586] remoteproc remoteproc0: 58820000.ipu is available

[    5.671269] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver

[    5.732340] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver

[[    5.752740] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000

  OK  ] Found device /dev/ttyS2.

[    5.760908] remoteproc remoteproc1: 55020000.ipu is available

[  OK  ] Started Update UTMP about System Boot/Shutdown.

[    5.812980] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver

[    5.828196] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver

[    5.852208] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000

[    5.865983] remoteproc remoteproc2: 40800000.dsp is available

[    5.879442] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver

[    5.888282] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver

[    5.914655] omap-rproc 41000000.dsp: assigned reserved memory node dsp2-memory@9f000000

[    5.930647] remoteproc remoteproc3: 41000000.dsp is available

[    6.196737] remoteproc remoteproc0: powering up 58820000.ipu

[    6.202500] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 6916676

[    6.214581] virtio_rpmsg_bus virtio0: rpmsg host is online

[    6.220826] remoteproc remoteproc0: registered virtio0 (type 7)

[    6.231764] remoteproc remoteproc0: remote processor 58820000.ipu is now up

[    6.678803] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659038@58:tps659038_rtc as r0

[    6.691694] omap_gpio 48051000.gpio: Could not set line 25 debounce to 20000 microseconds (-22)

[    6.800968] remoteproc remoteproc1: powering up 55020000.ipu

[    6.806750] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 4854132

[  OK  ] Started Network Time Synchronization.

[    6.815349] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1

[  OK  ] Reached target System Initialization.

[    6.832121] omap_rtc 48838000.rtc: registered as rtc1

[    6.837838] Driver for 1-wire Dallas network protocol.

[    6.872341] virtio_rpmsg_bus virtio1: rpmsg host is online

[    6.873728] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32

[    6.877904] remoteproc remoteproc1: registered virtio1 (type 7)

[    6.893188] remoteproc remoteproc1: remote processor 55020000.ipu is now up

[    6.898671] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33

[    6.911684] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c

[    6.922742] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65

[    6.953781] at24 0-0050: 4096 byte 24c32 EEPROM, read-only, 0 bytes/write

[    6.975017] at24 4-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write

[    7.151766] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode

[    7.195124] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.3

[    7.204700] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2

[    7.204736] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.2

[    7.217355] omap-des 480a5000.des: will run requests pump with realtime priority

[    7.372402] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d

[    7.384716] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered.

[    7.429065] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec

[    7.439051] phy phy-4a084000.phy.3: Linked as a consumer to regulator.23

[    7.449653] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3

[    7.456625] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3

[    7.462474] phy phy-4a085000.phy.4: Linked as a consumer to regulator.23

[    7.463426] omap-aes 4b500000.aes: will run requests pump with realtime priority

[    7.483479] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3

[    7.493672] omap-aes 4b700000.aes: will run requests pump with realtime priority

[  OK  ] Listening on D-Bus System Message Bus Socket.

         Starting Reboot and dump vmcore via kexec...

[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.

[  OK  ] Listening on RPCbind Server Activation Socket.

[  OK  ] Started Daily Cleanup of Temporary Directories.

[    7.784272] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin

[  OK  ] Listening on dropbear.socket.

[    7.901883] vpe 489d0000.vpe: Device registered as /dev/video0

[  OK  ] Reached target Sockets.

[  OK  ] Reached target Basic System.

         Starting Print notice about GPLv3 packages...

         Starting TI IPC Daemon...

         Starting RPC Bind Service...

         Starting Login Service...

[    8.118685] ahci 4a140000.sata: controller can't do 64bit DMA, forcing 32bit

[    8.126121] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok

[    8.132235] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1

         Starting rc.pvr.service...

[    8.144279] omap-hdmi-audio omap-hdmi-audio.0.auto: ASoC: no DMI vendor name!

[  OK  ] Started D-Bus System Message Bus.

[    8.167379] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode

[    8.176963] ahci 4a140000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 

[    8.200990] scsi host0: ahci

[    8.204423] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 82

[  OK  ] Started Periodic Command Scheduler.

[  OK  ] Started Job spooling tools.

[    8.239091] omap_gpio 48051000.gpio: Could not set line 24 debounce to 20000 microseconds (-22)

         Starting TI MultiCore Tools Daemon...

[  OK  ] Reached target System Time Synchronized.

[    8.265876] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 1

[  OK  ] Started Daily rotation of log files.

[  OK  ] Reached target Timers.

[  OK  ] Started Network Service.

[  OK  ] Started Reboot and dump vmcore via kexec.

         Starting Network Name Resolution...

         Starting Wait for Network to be Configured...

[    8.542391] ata1: SATA link down (SStatus 0 SControl 300)

[    8.603200] remoteproc remoteproc2: powering up 40800000.dsp

[    8.608901] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 20573520

[    8.617148] remoteproc remoteproc3: powering up 41000000.dsp

[    8.622940] remoteproc remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 20573520

[    8.650809] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0

[    8.656746] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0

[    8.663251] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0

[    8.669139] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0

[    8.734915] asoc-simple-card sound0: tlv320aic3x-hifi <-> 4847c000.mcasp mapping ok

[    8.770079] asoc-simple-card sound0: ASoC: no DMI vendor name!

[    8.792166] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6, bus freq 1000000

[    8.807445] libphy: 4b2b2400.mdio: probed

[    8.819376] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ]

[    8.836577] virtio_rpmsg_bus virtio2: rpmsg host is online

[    8.837368] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d

[    8.870953] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver unknown

[    8.887815] remoteproc remoteproc3: registered virtio2 (type 7)

[    8.893182] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver unknown

[    8.901168] remoteproc remoteproc3: remote processor 41000000.dsp is now up

[    8.916270] virtio_rpmsg_bus virtio3: rpmsg host is online

[    8.916657] virtio_rpmsg_bus virtio3: creating channel rpmsg-proto addr 0x3d

[    8.933941] remoteproc remoteproc2: registered virtio3 (type 7)

[    8.940146] remoteproc remoteproc2: remote processor 40800000.dsp is now up

[    8.966774] remoteproc remoteproc4: 4b234000.pru is available

[    8.981873] pru-rproc 4b234000.pru: PRU rproc node pru@4b234000 probed successfully

[    9.042479] remoteproc remoteproc5: 4b238000.pru is available

[    9.052717] pru-rproc 4b238000.pru: PRU rproc node pru@4b238000 probed successfully

[    9.102871] remoteproc remoteproc6: 4b2b4000.pru is available

[    9.168603] pru-rproc 4b2b4000.pru: PRU rproc node pru@4b2b4000 probed successfully

[  OK  ] Started Login Service.

[    9.200216] remoteproc remoteproc7: 4b2b8000.pru is available

[  OK  ] Started Network Name Resolution.

[  OK  ] Started TI IPC Daemon.

[  OK  ] Started RPC Bind Service.

[  OK  ] Started rc.pvr.service.

[  OK  ] Started TI MultiCore Tools Daemon.

[    9.235980] pru-rproc 4b2b8000.pru: PRU rproc node pru@4b2b8000 probed successfully

[    9.305070] prueth pruss2_eth: port 2: using random MAC addr: b6:c0:64:9a:42:8a

[    9.347866] prueth pruss2_eth: pruss_fw_drop_untagged_vlan 0

[    9.396309] prueth pruss2_eth: pruss MC Mask (Port 0) ff:ff:ff:ff:ff:ff

[    9.440917] prueth pruss2_eth: pruss MC Mask (Port 1) ff:ff:ff:ff:ff:ff

[    9.480384] prueth pruss2_eth: TI PRU ethernet (type 0) driver initialized

[   10.483636] dwc3 48890000.usb: Failed to get clk 'ref': -2

[   10.501057] dwc3 488d0000.usb: Failed to get clk 'ref': -2

[   10.507006] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: probing service rpc_example_1 with src 1024 dst 101

[   10.508486] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: published functions = 8

[   10.701664] NET: Registered protocol family 45

[   10.741314] usbcore: registered new interface driver usbfs

[   10.771973] usbcore: registered new interface driver hub

[   10.786517] usbcore: registered new device driver usb

[   10.822707] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller

[   10.834287] iep ptp bc clkid -1

[   10.837586] remoteproc remoteproc6: powering up 4b2b4000.pru

[   10.846868] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1

[   10.864158] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010

[   10.873932] xhci-hcd xhci-hcd.1.auto: irq 175, io mem 0x48890000

[   10.880474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[   10.890252] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   10.897805] usb usb1: Product: xHCI Host Controller

[   10.903079] usb usb1: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd

[   10.910458] usb usb1: SerialNumber: xhci-hcd.1.auto

[   10.915782] remoteproc remoteproc6: Booting fw image ti-pruss/am57xx-pru0-prueth-fw.elf, size 7228

[   10.927156] hub 1-0:1.0: USB hub found

[   10.931917] pruss 4b280000.pruss: configured system_events[63-0] = 00000600,04500000

[   10.940833] hub 1-0:1.0: 1 port detected

[   10.947922] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller

[   10.954827] pruss 4b280000.pruss: configured intr_channels = 0x000000d5 host_intr = 0x00000155

[   10.964430] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2

[   10.979181] remoteproc remoteproc6: remote processor 4b2b4000.pru is now up

[   10.987157] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed

[   10.994690] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.

[   11.003434] net eth0: started

[   11.007023] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[   11.014354] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

[   11.025523] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   11.033344] usb usb2: Product: xHCI Host Controller

[   11.038542] usb usb2: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd

[   11.046093] usb usb2: SerialNumber: xhci-hcd.1.auto

[   11.057641] remoteproc remoteproc7: powering up 4b2b8000.pru

[   11.064166] hub 2-0:1.0: USB hub found

[   11.068279] hub 2-0:1.0: 1 port detected

[   11.075790] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller

[   11.081319] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3

[   11.091270] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010

[   11.101694] xhci-hcd xhci-hcd.2.auto: irq 192, io mem 0x488d0000

[   11.108494] remoteproc remoteproc7: Booting fw image ti-pruss/am57xx-pru1-prueth-fw.elf, size 7256

[   11.118037] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[   11.127627] pruss 4b280000.pruss: configured system_events[63-0] = 00600000,08a00000

[   11.137477] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   11.137755] pruss 4b280000.pruss: configured intr_channels = 0x0000032a host_intr = 0x000002aa

[   11.152670] usb usb3: Product: xHCI Host Controller

[   11.158323] usb usb3: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd

[   11.159507] remoteproc remoteproc7: remote processor 4b2b8000.pru is now up

[   11.179043] net eth1: started

[   11.182160] usb usb3: SerialNumber: xhci-hcd.2.auto

[   11.183941] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

[   11.192567] hub 3-0:1.0: USB hub found

[   11.200185] hub 3-0:1.0: 1 port detected

[   11.206414] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller

[   11.212523] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4

[   11.220222] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed

[   11.228541] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.

[   11.237141] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

[   11.245799] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   11.253964] usb usb4: Product: xHCI Host Controller

[   11.258866] usb usb4: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd

[   11.269673] usb usb4: SerialNumber: xhci-hcd.2.auto

[   11.280799] hub 4-0:1.0: USB hub found

[   11.286204] hub 4-0:1.0: 1 port detected

***************************************************************

***************************************************************

NOTICE: This file system contains the following GPLv3 packages:

        autoconf

        bash-dev

        bash

        bc

        binutils-dev

        binutils

        bison-dev

        bison

        cifs-utils

        cpio

        cpp-symlinks

        cpp

        dosfstools

        elfutils-dev

        elfutils

        g++-symlinks

        g++

        gawk

        gcc-symlinks

        gcc

        gdb

        gdbc6x

        gdbserver

        gettext

        glmark2

        gstreamer1.0-libav

        gzip

        hidapi

        libasm1

        libbfd

        libcairo-perf-utils

        libdw1

        libelf1

        libgdbm-compat4

        libgdbm-dev

        libgdbm6

        libgettextlib

        libgettextsrc

        libgmp10

        libidn2-0

        libmpc3

        libmpfr6

        libreadline-dev

        libreadline7

        libunistring2

        m4-dev

        m4

        make

        nettle

        parted

        pdm-anomaly-detection

        rsync

        swig-dev

        swig

        which

If you do not wish to distribute GPLv3 components please remove

the above packages prior to distribution.  This can be done using

the opkg remove command.  i.e.:

    opkg remove <package>

Where <package> is the name printed in the list above

NOTE: If the package is a dependency of another package you

      will be notified of the dependent packages.  You should

      use the --force-removal-of-dependent-packages option to

      also remove the dependent packages as well

***************************************************************

***************************************************************

[  OK  ] Started Print notice about GPLv3 packages.

         Starting Save/Restore Sound Card State...

[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.

[  OK  ] Created slice system-systemd\x2dfsck.slice.

         Starting File System Check on /dev/mmcblk0p1...

         Starting weston.service...

[  OK  ] Reached target Host and Network Name Lookups.

[  OK  ] Reached target Network.

         Starting Permit User Sessions...

         Starting Enable and configure wl18xx bluetooth stack...

         Starting Simple Network Management Protocol (SNMP) Daemon....

         Starting Lightning Fast Webserver With Light System Requirements...

[  OK  ] Started NFS status monitor for NFSv2/3 locking..

         Starting Avahi mDNS/DNS-SD Stack...

[  OK  ] Started Save/Restore Sound Card State.

[  OK  ] Started Permit User Sessions.

[  OK  ] Started Enable and configure wl18xx bluetooth stack.

[  OK  ] Started Serial Getty on ttyS2.

[  OK  ] Started Getty on tty1.

[  OK  ] Reached target Login Prompts.

         Starting Synchronize System and HW clocks...

[  OK  ] Reached target Sound Card.

[  OK  ] Started Synchronize System and HW clocks.

[  OK  ] Started File System Check on /dev/mmcblk0p1.

         Mounting /run/media/mmcblk0p1...

[  OK  ] Started Lightning Fast Webserver With Light System Requirements.

[  OK  ] Started Avahi mDNS/DNS-SD Stack.

[  OK  ] Mounted /run/media/mmcblk0p1.

[  OK  ] Started Simple Network Management Protocol (SNMP) Daemon..

[  OK  ] Started weston.service.

         Starting telnetd.service...

         Starting Matrix GUI...

[  OK  ] Started telnetd.service.

[  OK  ] Started Matrix GUI.

         Starting thttpd.service...

[  OK  ] Started thttpd.service.

 _____                    _____           _         _   

|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_ 

|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|

|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  

              |___|                    |___|            

Arago Project http://arago-project.org mitysom-am57x ttyS2

Arago 2019.11 mitysom-am57x ttyS2

mitysom-am57x login: [   33.121758] aic_dvdd: disabling

CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0