Mity CPU Platforms » MitySOM-AM57X

U-Boot SPL 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530)

DRA752-GP ES2.0

no pinctrl state for default mode

** Unable to read file dra7-ipu1-fw.xem4 **

Firmware loading failed

Trying to boot from MMC1

no pinctrl state for default mode

Loading Environment from FAT... *** Warning - bad CRC, using default environment

Loading Environment from MMC... *** Warning - bad CRC, using default environment

U-Boot 2019.01-g3a254cb755-dirty (Mar 22 2024 - 16:41:18 +0530)

CPU  : DRA752-GP ES2.0

Model: TI AM5748 IDK

Board: MitySOM-57x Dev Kit Non-FPGA

DRAM:  2 GiB

MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1

Loading Environment from FAT... *** Warning - bad CRC, using default environment

Loading Environment from MMC... *** Warning - bad CRC, using default environment

MitySOM-57x - Model No: 5728-PX-4AA-RI Serial No: 21005275 Part Number: 80-001446RI-3A

Warning: fastboot.board_rev: unknown board revision

i2c_write: error waiting for data ACK (status=0x116)

cdce9xx_reg_write: failed for addr:5, ret:-121

board_set_pru_ethaddr

Net:   Could not get PHY for ethernet@48484000: addr 0

Warning: ethernet@48484000 using MAC address from ROM

eth0: ethernet@48484000

Hit any key to stop autoboot:  2  1  0 

switch to partitions #0, OK

mmc0 is current device

SD/MMC found on device 0

** Unable to read file boot.scr **

** Unable to read file uEnv.txt **

switch to partitions #0, OK

mmc0 is current device

SD/MMC found on device 0

4461056 bytes read in 195 ms (21.8 MiB/s)

90099 bytes read in 6 ms (14.3 MiB/s)

## Flattened Device Tree blob at 88000000

   Booting using the fdt blob at 0x88000000

   Loading Device Tree to 8ffe7000, end 8ffffff2 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Linux version 4.19.94-yocto-standard (oe-user@oe-host) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP PREEMPT Fri Oct 4 09:03:12 UTC 2024

[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d

[    0.000000] CPU: div instructions available: patching division code

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

[    0.000000] OF: fdt: Machine model: Critical Link MitySOM-AM57x

[    0.000000] Memory policy: Data cache writealloc

[    0.000000] efi: Getting EFI parameters from FDT:

[    0.000000] efi: UEFI not found.

[    0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB

[    0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB

[    0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool

[    0.000000] Reserved memory: created DMA memory pool at 0x000000009d000000, size 32 MiB

[    0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool

[    0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB

[    0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool

[    0.000000] cma: Reserved 128 MiB at 0x00000000f6c00000

[    0.000000] OMAP4: Map 0x00000000fed00000 to (ptrval) for dram barrier

[    0.000000] DRA752 ES2.0

[    0.000000] random: get_random_bytes called from start_kernel+0xb4/0x470 with crng_init=0

[    0.000000] percpu: Embedded 15 pages/cpu s32396 r8192 d20852 u61440

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 460096

[    0.000000] Kernel command line: console=ttyS2,115200n8 cma=128MB drm.edid_firmware=edid/1920x1080.bin video=HDMI-A-1:1920x1080 root=PARTUUID=dc4f364e-02 rw rootfstype=ext4 rootwait

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Memory: 1550312K/1847296K available (10240K kernel code, 336K rwdata, 2820K rodata, 2048K init, 272K bss, 34840K reserved, 262144K cma-reserved, 1160192K highmem)

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)

[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)

[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)

[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 337 kB)

[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 273 kB)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[    0.000000] rcu: Preemptible hierarchical RCU implementation.

[    0.000000] 	Tasks RCU enabled.

[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

[    0.000000] GIC: Using split EOI/Deactivate mode

[    0.000000] OMAP clockevent source: timer1 at 32786 Hz

[    0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys).

[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns

[    0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns

[    0.000018] Switching to timer-based delay loop, resolution 162ns

[    0.000293] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns

[    0.000303] OMAP clocksource: 32k_counter at 32768 Hz

[    0.000761] Console: colour dummy device 80x30

[    0.000803] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)

[    0.000819] pid_max: default: 32768 minimum: 301

[    0.000939] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000954] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.001510] CPU: Testing write buffer coherency: ok

[    0.001546] CPU0: Spectre v2: using ICIALLU workaround

[    0.001760] /cpus/cpu@0 missing clock-frequency property

[    0.001781] /cpus/cpu@1 missing clock-frequency property

[    0.001793] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[    0.059920] Setting up static identity map for 0x80200000 - 0x80200060

[    0.079929] rcu: Hierarchical SRCU implementation.

[    0.100124] EFI services will not be available.

[    0.119991] smp: Bringing up secondary CPUs ...

[    0.200373] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[    0.200379] CPU1: Spectre v2: using ICIALLU workaround

[    0.200501] smp: Brought up 1 node, 2 CPUs

[    0.200513] SMP: Total of 2 processors activated (24.59 BogoMIPS).

[    0.200522] CPU: All CPU(s) started in HYP mode.

[    0.200530] CPU: Virtualization extensions available.

[    0.201087] devtmpfs: initialized

[    0.218423] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0

[    0.218677] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

[    0.218694] futex hash table entries: 512 (order: 3, 32768 bytes)

[    0.222979] pinctrl core: initialized pinctrl subsystem

[    0.223507] DMI not present or invalid.

[    0.223783] NET: Registered protocol family 16

[    0.224994] DMA: preallocated 256 KiB pool for atomic coherent allocations

[    0.225910] omap_hwmod: l3_main_2 using broken dt data from ocp

[    0.418604] cpuidle: using governor ladder

[    0.418639] cpuidle: using governor menu

[    0.428699] OMAP GPIO hardware version 0.1

[    0.454089] No ATAGs?

[    0.454161] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[    0.454176] hw-breakpoint: maximum watchpoint size is 8 bytes.

[    0.455012] OMAP DMA hardware revision 0.0

[    0.466680] edma 43300000.edma: memcpy is disabled

[    0.470095] edma 43300000.edma: TI EDMA DMA engine driver

[    0.477261] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)

[    0.563112] omap-iommu 40d01000.mmu: 40d01000.mmu registered

[    0.563296] omap-iommu 40d02000.mmu: 40d02000.mmu registered

[    0.563540] omap-iommu 58882000.mmu: 58882000.mmu registered

[    0.563773] omap-iommu 55082000.mmu: 55082000.mmu registered

[    0.564152] omap-iommu 41501000.mmu: 41501000.mmu registered

[    0.564330] omap-iommu 41502000.mmu: 41502000.mmu registered

[    0.564611] iommu: Adding device 58820000.ipu to group 1

[    0.564692] iommu: Adding device 55020000.ipu to group 2

[    0.564817] iommu: Adding device 40800000.dsp to group 0

[    0.565041] iommu: Adding device 41000000.dsp to group 3

[    0.566281] SCSI subsystem initialized

[    0.567318] palmas 0-0058: Irq flag is 0x00000008

[    0.592281] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0

[    0.593936] SMPS12: supplied by regulator-dummy

[    0.595592] SMPS3: supplied by VMAIN

[    0.597155] SMPS45: supplied by regulator-dummy

[    0.598948] SMPS6: supplied by VMAIN

[    0.600640] SMPS7: supplied by VMAIN

[    0.602440] SMPS8: supplied by VMAIN

[    0.604093] SMPS9: supplied by VMAIN

[    0.605035] LDO1: supplied by VMAIN

[    0.611019] random: fast init done

[    0.611244] LDO2: supplied by VMAIN

[    0.621243] LDO3: supplied by VMAIN

[    0.631265] LDO4: supplied by VMAIN

[    0.631955] LDO5: supplied by regulator-dummy

[    0.632640] LDO6: supplied by regulator-dummy

[    0.633324] LDO7: supplied by regulator-dummy

[    0.634016] LDO8: supplied by regulator-dummy

[    0.634689] LDO9: supplied by VMAIN

[    0.641591] LDOLN: supplied by VMAIN

[    0.651302] LDOUSB: supplied by VMAIN

[    0.663695] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz

[    0.664612] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz

[    0.664827] media: Linux media interface: v0.10

[    0.664866] videodev: Linux video capture interface: v2.00

[    0.664940] pps_core: LinuxPPS API ver. 1 registered

[    0.664950] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.664971] PTP clock support registered

[    0.665002] EDAC MC: Ver: 3.0.0

[    0.671326] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400

[    0.671576] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400

[    0.672080] Advanced Linux Sound Architecture Driver Initialized.

[    0.672897] clocksource: Switched to clocksource arch_sys_counter

[    0.680956] NET: Registered protocol family 2

[    0.681528] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)

[    0.681558] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[    0.681622] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[    0.681749] TCP: Hash tables configured (established 8192 bind 8192)

[    0.681821] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.681855] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.681985] NET: Registered protocol family 1

[    0.682413] RPC: Registered named UNIX socket transport module.

[    0.682425] RPC: Registered udp transport module.

[    0.682433] RPC: Registered tcp transport module.

[    0.682442] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.683544] hw perfevents: no interrupt-affinity property for /pmu, guessing.

[    0.683730] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available

[    0.684725] Initialise system trusted keyrings

[    0.684853] workingset: timestamp_bits=14 max_order=19 bucket_order=5

[    0.689961] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    0.690416] NFS: Registering the id_resolver key type

[    0.690436] Key type id_resolver registered

[    0.690446] Key type id_legacy registered

[    0.690488] ntfs: driver 2.1.32 [Flags: R/O].

[    0.692203] Key type asymmetric registered

[    0.692216] Asymmetric key parser 'x509' registered

[    0.692263] bounce: pool size: 64 pages

[    0.692297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)

[    0.692308] io scheduler noop registered

[    0.692317] io scheduler deadline registered

[    0.692417] io scheduler cfq registered (default)

[    0.692428] io scheduler mq-deadline registered

[    0.692438] io scheduler kyber registered

[    0.698232] pinctrl-single 4a003400.pinmux: 282 pins, size 1128

[    0.705663] V3_3D: supplied by smps9

[    0.705893] aic_dvdd: supplied by V3_3D

[    0.705955] vtt_fixed: supplied by V3_3D

[    0.750345] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled

[    0.753866] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 43, base_baud = 3000000) is a 8250

[    0.754813] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 44, base_baud = 3000000) is a 8250

[    1.733495] console [ttyS2] enabled

[    1.737899] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 45, base_baud = 3000000) is a 8250

[    1.748783] omap_rng 48090000.rng: Random Number Generator ver. 20

[    1.749319] random: crng init done

[    1.755870] omapdss_dss 58000000.dss: Linked as a consumer to regulator.22

[    1.765478] DSS: OMAP DSS rev 6.1

[    1.771760] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15

[    1.779297] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15

[    1.799644] brd: module loaded

[    1.809031] loop: module loaded

[    1.817944] m25p80 spi0.0: found n25q256ax1, expected s25fl256s1

[    1.824351] m25p80 spi0.0: n25q256ax1 (32768 Kbytes)

[    1.829410] 7 fixed-partitions partitions found on MTD device spi0.0

[    1.835829] Creating 7 MTD partitions on "spi0.0":

[    1.840646] 0x000000000000-0x000000040000 : "QSPI.SPL"

[    1.846535] 0x000000040000-0x000000140000 : "QSPI.u-boot"

[    1.852644] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os"

[    1.859367] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env"

[    1.865830] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1"

[    1.872997] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel"

[    1.879083] 0x0000009e0000-0x000002000000 : "QSPI.file-system"

[    1.886231] libphy: Fixed MDIO Bus: probed

[    1.893576] i2c /dev entries driver

[    1.900220] gpio-fan gpio_fan: GPIO fan initialized

[    1.936680] cpu cpu0: Linked as a consumer to regulator.6

[    1.942180] cpu cpu0: Linked as a consumer to regulator.29

[    1.949345] sdhci: Secure Digital Host Controller Interface driver

[    1.955648] sdhci: Copyright(c) Pierre Ossman

[    1.961357] sdhci-pltfm: SDHCI platform and OF driver helper

[    1.967709] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)

[    1.976563] sdhci-omap 4809c000.mmc: Got CD GPIO

[    1.981368] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.28

[    1.988409] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13

[    1.995574] sdhci-omap 4809c000.mmc: Dropping the link to regulator.13

[    2.002182] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.2

[    2.009133] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.13

[    2.016323] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode

[    2.048820] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA

[    2.056508] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2

[    2.063327] sdhci-omap 480b4000.mmc: Dropping the link to regulator.2

[    2.069881] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2

[    2.076884] sdhci-omap 480b4000.mmc: Cannot get pinctrl

[    2.083142] ledtrig-cpu: registered to indicate activity on CPUs

[    2.091507] ad799x 4-0029: Linked as a consumer to regulator.2

[    2.097425] ad799x 4-0029: 4-0029 supply vref not found, using dummy regulator

[    2.104727] ad799x 4-0029: Linked as a consumer to regulator.0

[    2.105120] mmc0: host does not support reading read-only switch, assuming write-enable

[    2.120799] mmc0: new high speed SDHC card at address 59b4

[    2.120854] NET: Registered protocol family 10

[    2.136904] mmcblk0: mmc0:59b4 EB2MW 29.8 GiB 

[    2.141517] Segment Routing with IPv6

[    2.145277] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

[    2.151638] NET: Registered protocol family 17

[    2.152800]  mmcblk0: p1 p2

[    2.156371] Key type dns_resolver registered

[    2.163436] Registering SWP/SWPB emulation handler

[    2.168265] omap_voltage_late_init: Voltage driver support not added

[    2.174683] Power Management for TI OMAP4+ devices.

[    2.180418] Loading compiled-in X.509 certificates

[    2.202965] dmm 4e000000.dmm: workaround for errata i878 in use

[    2.210209] dmm 4e000000.dmm: initialized all PAT entries

[    2.216569] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15

[    2.224080] omapdss_hdmi5 58040000.encoder: Dropping the link to regulator.15

[    2.232380] omapdss_hdmi5 58040000.encoder: Linked as a consumer to regulator.15

[    2.240146] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)

[    2.248151] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops)

[    2.256896] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    2.263557] [drm] No driver support for vblank timestamp query.

[    2.269518] [drm] Cannot find any crtc or sizes

[    2.274796] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0

[    2.282345] hctosys: unable to open rtc device (rtc0)

[    2.287976] ALSA device list:

[    2.290954]   No soundcards found.

[    2.366488] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[    2.374673] VFS: Mounted root (ext4 filesystem) on device 179:2.

[    2.383199] devtmpfs: mounted

[    2.387061] Freeing unused kernel memory: 2048K

[    2.391705] Run /sbin/init as init process

[    2.749053] systemd[1]: System time before build time, advancing clock.

[    2.780094] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)

[    2.801867] systemd[1]: Detected architecture arm.

Welcome to Arago 2019.11!

[    2.843943] systemd[1]: Set hostname to <mitysom-am57x>.

[    3.061623] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.

[    3.078818] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)

[    3.350357] systemd[1]: Listening on Network Service Netlink Socket.

[    3.356806] [drm] Cannot find any crtc or sizes

[  OK  ] Listening on Network Service Netlink Socket.

[    3.395762] systemd[1]: Created slice system-getty.slice.

[  OK  ] Created slice system-getty.slice.

[    3.423331] systemd[1]: Listening on Journal Socket (/dev/log).

[  OK  ] Listening on Journal Socket (/dev/log).

[    3.453565] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[  OK  ] Started Forward Password Requests to Wall Directory Watch.

[    3.493170] systemd[1]: Listening on initctl Compatibility Named Pipe.

[  OK  ] Listening on initctl Compatibility Named Pipe.

[  OK  ] Created slice system-serial\x2dgetty.slice.

[  OK  ] Reached target Remote File Systems.

[  OK  ] Listening on Journal Socket.

         Mounting POSIX Message Queue File System...

         Starting Load Kernel Modules...

         Mounting Kernel Debug File System...

[    3.705974] cmemk: loading out-of-tree module taints kernel.

[    3.712717] CMEMK module: reference Linux version 4.19.94

[    3.718778] allocated heap buffer 0x40500000 of size 0x100000

[    3.724605] cmemk initialized

[  OK  ] Listening on udev Control Socket.

[    3.736046] cryptodev: driver 1.9 loaded.

[  OK  ] Started Dispatch Password Requests to Console Directory Watch.

[  OK  ] Reached target Paths.

[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.

         Starting Remount Root and Kernel File Systems...

[    3.868590] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

         Starting Journal Service...

[  OK  ] Reached target Swap.

         Mounting Temporary Directory (/tmp)...

[  OK  ] Created slice User and Session Slice.

[  OK  ] Reached target Slices.

[  OK  ] Listening on Process Core Dump Socket.

[  OK  ] Listening on udev Kernel Socket.

         Starting udev Coldplug all Devices...

[  OK  ] Started Journal Service.

[  OK  ] Mounted POSIX Message Queue File System.

[  OK  ] Started Load Kernel Modules.

[  OK  ] Mounted Kernel Debug File System.

[  OK  ] Started Remount Root and Kernel File Systems.

[  OK  ] Mounted Temporary Directory (/tmp).

         Starting Create Static Device Nodes in /dev...

         Mounting Kernel Configuration File System...

         Starting Apply Kernel Variables...

         Starting Flush Journal to Persistent Storage...

[  OK  ] Started Create Static Device Nodes in /dev.

[  OK  ] Mounted Kernel Configuration File System.

[  OK  ] Started Apply Kernel Variables.

         Starting udev Kernel Device Manager...

[  OK  ] Reached target Local File Systems (Pre).

         Mounting /media/ram...

[  OK  ] Reached target Containers.

         Mounting /var/volatile...

[  OK  ] Started udev Kernel Device Manager.

[  OK  ] Mounted /media/ram.

[  OK  ] Mounted /var/volatile.

         [    4.787254] systemd-journald[102]: Received request to flush runtime journal from PID 1

Starting Load/Save Random Seed...

[  OK  ] Reached target Local File Systems.

[  OK  ] Started Flush Journal to Persistent Storage.

[  OK  ] Started Load/Save Random Seed.

         Starting Create Volatile Files and Directories...

[    4.958816] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver

[  OK  ] Started udev Coldplug all Devices.

[    5.013987] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver

[  OK  ] Started Create Volatile Files and Directories[    5.051426] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000

.

[    5.066137] remoteproc remoteproc0: 58820000.ipu is available

         [    5.072351] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver

Starting Update UTMP about System Boot/Shutdown...

[    5.089242] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver

[    5.102611] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000

         Starting Network Service...

[    5.143128] remoteproc remoteproc1: 55020000.ipu is available

         Starting Network Time Synchronization...

[    5.168663] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver

[    5.177966] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver

[    5.220057] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000

[    5.283045] remoteproc remoteproc2: 40800000.dsp is available

[    5.294625] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver

[    5.302771] omap-rproc 41000000.dsp: ignoring dependency for device, assuming no driver

[    5.310891] omap-rproc 41000000.dsp: assigned reserved memory node dsp2-memory@9f000000

[  OK  ] Started Update UTMP about System Boot/Shutdow[    5.331663] remoteproc remoteproc3: 41000000.dsp is available

n.

[  OK  ] Found device /dev/ttyS2.

[    5.588735] remoteproc remoteproc0: powering up 58820000.ipu

[    5.594573] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 6916676

[    5.610888] virtio_rpmsg_bus virtio0: rpmsg host is online

[    5.620885] remoteproc remoteproc0: registered virtio0 (type 7)

[    5.628387] remoteproc remoteproc0: remote processor 58820000.ipu is now up

[    6.024921] remoteproc remoteproc1: powering up 55020000.ipu

[    6.030890] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 4854132

[    6.038835] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1

[    6.053659] omap_gpio 48051000.gpio: Could not set line 25 debounce to 20000 microseconds (-22)

[    6.075754] virtio_rpmsg_bus virtio1: rpmsg host is online

[    6.086628] remoteproc remoteproc1: registered virtio1 (type 7)

[    6.092579] remoteproc remoteproc1: remote processor 55020000.ipu is now up

[    6.104301] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x32

[    6.113298] virtio_rpmsg_bus virtio1: creating channel rpmsg-client-sample addr 0x33

[    6.121159] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c

[    6.132353] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65

[    6.180108] Driver for 1-wire Dallas network protocol.

[    6.187803] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659038@58:tps659038_rtc as rtc0

[    6.297010] omap_rtc 48838000.rtc: registered as rtc1

[  OK  ] Started Network Time Synchronization.

[    6.404452] at24 0-0050: 4096 byte 24c32 EEPROM, read-only, 0 bytes/write

[  OK  ] Reached target System Initialization.

[    6.451400] at24 4-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write

[    6.462937] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode

[  OK  ] Started Daily Cleanup of Temporary Directories.

[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.

[    6.530153] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.3

[  OK  ] Listening on RPCbind Server Activation Socket.

[    6.544465] tlv320aic3x-codec 4-0018: Linked as a consumer to regulator.2

[    6.644392] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2

[    6.653605] omap-des 480a5000.des: will run requests pump with realtime priority

[    6.684631] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d

[    6.701151] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered.

[    6.764043] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3

[    6.986474] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec

[    7.004363] phy phy-4a084000.phy.3: Linked as a consumer to regulator.23

[    7.021118] phy phy-4a085000.phy.4: Linked as a consumer to regulator.23

[    7.197871] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin

[  OK  ] Listening on D-Bus System Message Bus Socket.[    7.315051] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3

[    7.321671] omap-aes 4b500000.aes: will run requests pump with realtime priority

[    7.329214] vpe 489d0000.vpe: Device registered as /dev/video0

[    7.335558] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3

         Starting Reboot and dump vmcore via kexec...

[    7.348320] omap-aes 4b700000.aes: will run requests pump with realtime priority

[    7.547854] ahci 4a140000.sata: controller can't do 64bit DMA, forcing 32bit

[    7.555154] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1

[    7.560778] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode

[    7.571562] ahci 4a140000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst 

[    7.591233] scsi host0: ahci

[    7.595510] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 82

[  OK  ] Listening on dropbear.socket.

[    7.661479] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok

[    7.671030] omap-hdmi-audio omap-hdmi-audio.0.auto: ASoC: no DMI vendor name!

[  OK  ] Reached target Sockets.

[    7.691701] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 1

[  OK  ] Reached target Basic System.

[  OK  ] Started Job spooling tools.

[    7.762870] omap_gpio 48051000.gpio: Could not set line 24 debounce to 20000 microseconds (-22)

[  OK  ] Started D-Bus System Message Bus.

         Starting Login Service...

         Starting TI MultiCore Tools Daemon...

[    7.869706] remoteproc remoteproc2: powering up 40800000.dsp

[    7.876056] remoteproc remoteproc3: powering up 41000000.dsp

[    7.891208] remoteproc remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 20573520

[    7.902117] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 20573520

         Starting RPC Bind Service...

[    7.935094] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0

[    7.941024] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0

[    7.948843] ata1: SATA link down (SStatus 0 SControl 300)

[    7.955838] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0

[    7.961755] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0

[  OK  ] Started Periodic Command Scheduler.

         Starting Print notice about GPLv3 packages...

         Starting TI IPC Daemon...

[    8.054786] virtio_rpmsg_bus virtio2: rpmsg host is online

[    8.066316] remoteproc remoteproc3: registered virtio2 (type 7)

[    8.072272] remoteproc remoteproc3: remote processor 41000000.dsp is now up

         Starting rc.pvr.service...

[  OK  ] Reached target S[    8.086503] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d

ystem Time Synchronized.

[    8.109675] virtio_rpmsg_bus virtio3: rpmsg host is online

[    8.116399] remoteproc remoteproc2: registered virtio3 (type 7)

[    8.124553] remoteproc remoteproc2: remote processor 40800000.dsp is now up

[  OK  ] Started Daily rotation of log files.

[  OK  ] Reached target Timers.

[  OK  ] Started Network Service.

[  OK  ] Started Reboot and dump vmcore via kexec.

[    8.185381] virtio_rpmsg_bus virtio3: creating channel rpmsg-proto addr 0x3d

[    8.295651] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ]

[  OK  ] Started RPC Bind Service.

[  OK  ] Started TI IPC Daemon.

[    8.342947] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6, bus freq 1000000

[    8.371096] asoc-simple-card sound0: tlv320aic3x-hifi <-> 4847c000.mcasp mapping ok

[    8.392358] libphy: 4b2b2400.mdio: probed

[    8.401569] asoc-simple-card sound0: ASoC: no DMI vendor name!

[    8.485153] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver unknown

[    8.506189] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver unknown

[  OK  ] Started TI MultiCore Tools Daemon.

[  OK  ] Started rc.pvr.service.

[    8.617554] remoteproc remoteproc4: 4b234000.pru is available

[    8.678005] pru-rproc 4b234000.pru: PRU rproc node pru@4b234000 probed successfully

[    8.707664] remoteproc remoteproc5: 4b238000.pru is available

[    8.753018] pru-rproc 4b238000.pru: PRU rproc node pru@4b238000 probed successfully

[    8.814120] remoteproc remoteproc6: 4b2b4000.pru is available

[    8.862445] pru-rproc 4b2b4000.pru: PRU rproc node pru@4b2b4000 probed successfully

[    8.929607] remoteproc remoteproc7: 4b2b8000.pru is available

[    8.985483] pru-rproc 4b2b8000.pru: PRU rproc node pru@4b2b8000 probed successfully

[    9.064717] prueth pruss2_eth: port 2: using random MAC addr: ce:2f:a5:3d:14:16

[    9.107174] prueth pruss2_eth: pruss_fw_drop_untagged_vlan 0

[    9.145748] prueth pruss2_eth: pruss MC Mask (Port 0) ff:ff:ff:ff:ff:ff

[    9.188547] prueth pruss2_eth: pruss MC Mask (Port 1) ff:ff:ff:ff:ff:ff

[    9.237555] prueth pruss2_eth: TI PRU ethernet (type 0) driver initialized

[   10.003692] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: probing service rpc_example_1 with src 1024 dst 101

[   10.008746] dwc3 48890000.usb: Failed to get clk 'ref': -2

[   10.044618] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: published functions = 8

[   10.125501] dwc3 488d0000.usb: Failed to get clk 'ref': -2

[   10.166293] NET: Registered protocol family 45

[   10.294240] usbcore: registered new interface driver usbfs

[   10.300236] usbcore: registered new interface driver hub

[   10.309074] usbcore: registered new device driver usb

[   10.343582] iep ptp bc clkid -1

[   10.348815] remoteproc remoteproc7: powering up 4b2b8000.pru

[   10.356704] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller

[   10.363532] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1

[   10.372855] remoteproc remoteproc7: Booting fw image ti-pruss/am57xx-pru1-prueth-fw.elf, size 7256

[   10.382831] pruss 4b280000.pruss: configured system_events[63-0] = 00600000,08a00000

[   10.383007] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010

[   10.395767] pruss 4b280000.pruss: configured intr_channels = 0x0000032a host_intr = 0x000002aa

[   10.408863] remoteproc remoteproc7: remote processor 4b2b8000.pru is now up

[   10.417026] xhci-hcd xhci-hcd.1.auto: irq 175, io mem 0x48890000

[   10.423080] net eth1: started

[   10.423205] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

[   10.427867] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[   10.442386] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   10.450141] usb usb1: Product: xHCI Host Controller

[   10.455025] remoteproc remoteproc6: powering up 4b2b4000.pru

[   10.456625] usb usb1: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd

[   10.468115] usb usb1: SerialNumber: xhci-hcd.1.auto

[   10.474592] remoteproc remoteproc6: Booting fw image ti-pruss/am57xx-pru0-prueth-fw.elf, size 7228

[   10.474832] hub 1-0:1.0: USB hub found

[   10.488760] pruss 4b280000.pruss: configured system_events[63-0] = 00000600,04500000

[   10.488933] hub 1-0:1.0: 1 port detected

[   10.503153] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller

[   10.508766] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2

[   10.508855] pruss 4b280000.pruss: configured intr_channels = 0x000000d5 host_intr = 0x00000155

[   10.518089] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed

[   10.532602] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.

[   10.541305] remoteproc remoteproc6: remote processor 4b2b4000.pru is now up

[   10.541365] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

[   10.557908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   10.563099] net eth0: started

[   10.566191] usb usb2: Product: xHCI Host Controller

[   10.568685] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[   10.573243] usb usb2: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd

[   10.586045] usb usb2: SerialNumber: xhci-hcd.1.auto

[   10.592459] hub 2-0:1.0: USB hub found

[   10.596511] hub 2-0:1.0: 1 port detected

[   10.601797] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller

[   10.607679] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3

[   10.616051] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010

[   10.625944] xhci-hcd xhci-hcd.2.auto: irq 192, io mem 0x488d0000

[   10.632416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

[   10.640956] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   10.649563] usb usb3: Product: xHCI Host Controller

[   10.655823] usb usb3: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd

[   10.662862] usb usb3: SerialNumber: xhci-hcd.2.auto

[   10.671971] hub 3-0:1.0: USB hub found

[   10.675871] hub 3-0:1.0: 1 port detected

[   10.680870] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller

[   10.692326] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4

[   10.701840] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed

[   10.708773] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.

[   10.717379] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

[   10.725923] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[   10.733532] usb usb4: Product: xHCI Host Controller

[   10.738512] usb usb4: Manufacturer: Linux 4.19.94-yocto-standard xhci-hcd

[   10.745660] usb usb4: SerialNumber: xhci-hcd.2.auto

[   10.752052] hub 4-0:1.0: USB hub found

[   10.755988] hub 4-0:1.0: 1 port detected

***************************************************************

***************************************************************

NOTICE: This file system contains the following GPLv3 packages:

	autoconf

	bash-dev

	bash

	bc

	binutils-dev

	binutils

	bison-dev

	bison

	cifs-utils

	cpio

	cpp-symlinks

	cpp

	dosfstools

	elfutils-dev

	elfutils

	g++-symlinks

	g++

	gawk

	gcc-symlinks

	gcc

	gdb

	gdbc6x

	gdbserver

	gettext

	glmark2

	gstreamer1.0-libav

	gzip

	hidapi

	libasm1

	libbfd

	libcairo-perf-utils

	libdw1

	libelf1

	libgdbm-compat4

	libgdbm-dev

	libgdbm6

	libgettextlib

	libgettextsrc

	libgmp10

	libidn2-0

	libmpc3

	libmpfr6

	libreadline-dev

	libreadline7

	libunistring2

	m4-dev

	m4

	make

	nettle

	parted

	pdm-anomaly-detection

	rsync

	swig-dev

	swig

	which

If you do not wish to distribute GPLv3 components please remove

the above packages prior to distribution.  This can be done using

the opkg remove command.  i.e.:

    opkg remove <package>

Where <package> is the name printed in the list above

NOTE: If the package is a dependency of another package you

      will be notified of the dependent packages.  You should

      use the --force-removal-of-dependent-packages option to

      also remove the dependent packages as well

***************************************************************

***************************************************************

[  OK  ] Started Print notice about GPLv3 packages.

         Starting Save/Restore Sound Card State...

[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.

[  OK  ] Created slice system-systemd\x2dfsck.slice.

         Starting File System Check on /dev/mmcblk0p1...

         Starting weston.service...

         Starting Wait for Network to be Configured...

         Starting Network Name Resolution...

[  OK  ] Started Save/Restore Sound Card State.

[  OK  ] Reached target Sound Card.

[  OK  ] Started Login Service.

[  OK  ] Started File System Check on /dev/mmcblk0p1.

         Mounting /run/media/mmcblk0p1...

[  OK  ] Mounted /run/media/mmcblk0p1.

[  OK  ] Started Network Name Resolution.

[  OK  ] Reached target Network.

         Starting Permit User Sessions...

         Starting Simple Network Management Protocol (SNMP) Daemon....

         Starting Enable and configure wl18xx bluetooth stack...

         Starting Lightning Fast Webserver With Light System Requirements...

[  OK  ] Reached target Host and Network Name Lookups.

[  OK  ] Started NFS status monitor for NFSv2/3 locking..

         Starting Avahi mDNS/DNS-SD Stack...

[  OK  ] Started Permit User Sessions.

[  OK  ] Started Enable and configure wl18xx bluetooth stack.

[  OK  ] Started Lightning Fast Webserver With Light System Requirements.

[  OK  ] Started Avahi mDNS/DNS-SD Stack.

[  OK  ] Started Serial Getty on ttyS2.

[  OK  ] Started Getty on tty1.

[  OK  ] Reached target Login Prompts.

         Starting Synchronize System and HW clocks...

[  OK  ] Started Synchronize System and HW clocks.

[  OK  ] Started Simple Network Management Protocol (SNMP) Daemon..

[  OK  ] Started weston.service.

         Starting Matrix GUI...

         Starting telnetd.service...

[  OK  ] Started Matrix GUI.

[  OK  ] Started telnetd.service.

         Starting thttpd.service...

[  OK  ] Started thttpd.service.

 _____                    _____           _         _   

|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_ 

|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|

|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  

              |___|                    |___|            

Arago Project http://arago-project.org mitysom-am57x ttyS2

Arago 2019.11 mitysom-am57x ttyS2

mitysom-am57x login: [   32.472946] aic_dvdd: disabling

[  133.772670] NET: Registered protocol family 15

[  133.860216] Initializing XFRM netlink socket

[  268.632935] omap-mailbox 48840000.mailbox: Try increasing MBOX_TX_QUEUE_LEN

[  268.639940] omap-rproc 58820000.ipu: PM mbox_send_message failed: -105