Project

General

Profile

RE: USB2.0 Host on MityDSP-L138F » usb_bootlog.txt

Jonathan Cormier, 06/17/2014 11:51 AM

 
1
Linux version 3.2.0+ (jcormier@mitydsp-ubuntu14) (gcc version 4.5.4 20120305 (prerelease) (GCC) ) #3 PREEMPT Tue Jun 17 10:57:27 EDT 2014
2
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
3
CPU: VIVT data cache, VIVT instruction cache
4
Machine: MityDSP-L138/MityARM-1808
5
Ignoring unrecognised tag 0x42000101
6
Memory policy: ECC disabled, Data cache writethrough
7
DaVinci da850/omap-l138/am18x variant 0x1
8
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 24384
9
Kernel command line: mem=96M console=ttyS1,115200n8 mtdparts=nand:128M(rootfs),-(userfs) root=/dev/mmcblk0p1 rw,rootwait ip=dhcp
10
PID hash table entries: 512 (order: -1, 2048 bytes)
11
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
12
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
13
Memory: 96MB = 96MB total
14
Memory: 91296k/91296k available, 7008k reserved, 0K highmem
15
Virtual kernel memory layout:
16
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
17
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
18
    vmalloc : 0xc6800000 - 0xfea00000   ( 898 MB)
19
    lowmem  : 0xc0000000 - 0xc6000000   (  96 MB)
20
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
21
      .text : 0xc0008000 - 0xc053e950   (5339 kB)
22
      .init : 0xc053f000 - 0xc0568000   ( 164 kB)
23
      .data : 0xc0568000 - 0xc05c7e80   ( 384 kB)
24
       .bss : 0xc05c7ea4 - 0xc05f4970   ( 179 kB)
25
NR_IRQS:245
26
Console: colour dummy device 80x30
27
Calibrating delay loop... 148.88 BogoMIPS (lpj=744448)
28
pid_max: default: 32768 minimum: 301
29
Mount-cache hash table entries: 512
30
CPU: Testing write buffer coherency: ok
31
devtmpfs: initialized
32
DaVinci: 144 gpio irqs
33
print_constraints: dummy:
34
NET: Registered protocol family 16
35
baseboard_pre_init: Entered
36
mityomapl138_setup_nand: using 8 bit data
37
baseboard_init [IndustrialIO]...
38
bio: create slab <bio-0> at 0
39
SCSI subsystem initialized
40
usbcore: registered new interface driver usbfs
41
usbcore: registered new interface driver hub
42
usbcore: registered new device driver usb
43
print_constraints: VDCDC1: 1150 <--> 1350 mV at 1200 mV
44
print_constraints: VDCDC2: 1800 mV
45
print_constraints: VDCDC3: 1200 mV
46
print_constraints: LDO1: 1800 mV
47
print_constraints: LDO2: 2500 <--> 3300 mV at 3300 mV
48
Advanced Linux Sound Architecture Driver Version 1.0.24.
49
Switching to clocksource timer0_1
50
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
51
Waiting for USB PHY clock good...
52
musb-hdrc musb-hdrc: USB OTG mode controller at fee00000 using PIO, IRQ 58
53
NET: Registered protocol family 2
54
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
55
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
56
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
57
TCP: Hash tables configured (established 4096 bind 4096)
58
TCP reno registered
59
UDP hash table entries: 256 (order: 0, 4096 bytes)
60
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
61
NET: Registered protocol family 1
62
RPC: Registered named UNIX socket transport module.
63
RPC: Registered udp transport module.
64
RPC: Registered tcp transport module.
65
RPC: Registered tcp NFSv4.1 backchannel transport module.
66
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
67
msgmni has been set to 178
68
io scheduler noop registered (default)
69
start plist test
70
end plist test
71
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
72
serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A
73
serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A
74
console [ttyS1] enabled
75
serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A
76
brd: module loaded
77
at24 1-0050: 256 byte 24c02 EEPROM, read-only, 0 bytes/write
78
MityOMAPL138: Found MAC = 00:50:c2:e6:70:b5
79
MityOMAPL138: Part Number = L138-DG-225-RI
80
ahci ahci: forcing PORTS_IMPL to 0x1
81
ahci ahci: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
82
ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc
83
scsi0 : ahci_platform
84
ata1: SATA max UDMA/133 mmio [mem 0x01e18000-0x01e19fff] port 0x100 irq 67
85
ONFI flash detected
86
ONFI param page 0 valid
87
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP)
88
Bad block table found at page 131008, version 0x01
89
Bad block table found at page 130944, version 0x01
90
Creating 2 MTD partitions on "davinci_nand.1":
91
0x000000000000-0x000008000000 : "rootfs"
92
0x000008000000-0x000010000000 : "homefs"
93
davinci_nand davinci_nand.1: controller rev. 2.5
94
spi_davinci spi_davinci.1: DMA: supported
95
spi_davinci spi_davinci.1: DMA: RX channel: 18, TX channel: 19, event queue: 0
96
m25p80 spi1.0: m25p64-nonjedec (8192 Kbytes)
97
Creating 8 MTD partitions on "m25p80":
98
0x000000000000-0x000000010000 : "ubl"
99
0x000000010000-0x000000090000 : "u-boot"
100
0x000000090000-0x0000000a0000 : "u-boot-env"
101
0x0000000a0000-0x0000000b0000 : "periph-config"
102
No LCD configured
103
MII PHY configured
104
0x0000000b0000-0x000000100000 : "reserved"
105
0x000000100000-0x000000400000 : "kernel"
106
0x000000400000-0x000000600000 : "fpga"
107
0x000000600000-0x000000800000 : "spare"
108
spi_davinci spi_davinci.1: Controller at 0xfef0e000
109
CAN device driver interface
110
mcp251x spi1.1: probed
111
davinci_mdio davinci_mdio.0: davinci mdio revision 1.5
112
davinci_mdio davinci_mdio.0: detected phy mask fffffff7
113
davinci_mdio.0: probed
114
davinci_mdio davinci_mdio.0: phy[3]: device 0:03, driver unknown
115
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
116
ohci ohci.0: DA8xx OHCI
117
ohci ohci.0: new USB bus registered, assigned bus number 1
118
Waiting for USB PHY clock good...
119
ohci ohci.0: irq 59, io mem 0x01e25000
120
ata1: SATA link down (SStatus 0 SControl 300)
121
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
122
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
123
usb usb1: Product: DA8xx OHCI
124
usb usb1: Manufacturer: Linux 3.2.0+ ohci_hcd
125
usb usb1: SerialNumber: ohci.0
126
hub 1-0:1.0: USB hub found
127
hub 1-0:1.0: 1 port detected
128
Initializing USB Mass Storage driver...
129
usbcore: registered new interface driver usb-storage
130
USB Mass Storage support registered.
131
 gadget: using random self ethernet address
132
 gadget: using random host ethernet address
133
usb0: MAC d6:29:40:5e:52:83
134
usb0: HOST MAC 66:8a:7e:1d:fb:03
135
 gadget: Ethernet Gadget, version: Memorial Day 2008
136
 gadget: g_ether ready
137
musb-hdrc musb-hdrc: MUSB HDRC host driver
138
musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2
139
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
140
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
141
usb usb2: Product: MUSB HDRC host driver
142
usb usb2: Manufacturer: Linux 3.2.0+ musb-hcd
143
usb usb2: SerialNumber: musb-hdrc
144
hub 2-0:1.0: USB hub found
145
hub 2-0:1.0: 1 port detected
146
mousedev: PS/2 mouse device common for all mice
147
omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
148
omap_rtc: RTC power up reset detected
149
omap_rtc: already running
150
i2c /dev entries driver
151
cpuidle: using governor ladder
152
cpuidle: using governor menu
153
davinci_mmc davinci_mmc.0: Using DMA, 4-bit mode
154
usbcore: registered new interface driver usbhid
155
usbhid: USB HID core driver
156
mmc0: new high speed SDHC card at address 1234
157
mmcblk0: mmc0:1234 SA08G 7.28 GiB
158
 mmcblk0: p1
159
dsd1791 spi1.2: Failed to add route LLOUT->Line Out
160
asoc: dsd1791 <-> davinci-mcasp.0 mapping ok
161
ALSA device list:
162
  #0: MityDSP-L138 INDIO
163
TCP cubic registered
164
NET: Registered protocol family 17
165
can: controller area network core (rev 20090105 abi 8)
166
NET: Registered protocol family 29
167
can: raw protocol (rev 20090105)
168
regulator_init_complete: LDO2: incomplete constraints, leaving on
169
regulator_init_complete: LDO1: incomplete constraints, leaving on
170
regulator_init_complete: VDCDC3: incomplete constraints, leaving on
171
regulator_init_complete: VDCDC2: incomplete constraints, leaving on
172
regulator_init_complete: VDCDC1: incomplete constraints, leaving on
173
console [netcon0] enabled
174
netconsole: network logging started
175
omap_rtc omap_rtc: setting system clock to 2000-01-01 01:04:22 UTC (946688662)
176
davinci_mdio davinci_mdio.0: resetting idled controller
177
net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:03, id=40005201)
178
PHY: 0:03 - Link is Up - 100/Full
179
Sending DHCP requests ., OK
180
IP-Config: Got DHCP answer from 0.0.0.0, my address is 10.0.100.96
181
IP-Config: Complete:
182
     device=eth0, addr=10.0.100.96, mask=255.255.0.0, gw=10.0.0.1,
183
     host=10.0.100.96, domain=syr.criticallink.com, nis-domain=(none),
184
     bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
185
kjournald starting.  Commit interval 5 seconds
186
EXT3-fs (mmcblk0p1): using internal journal
187
EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
188
VFS: Mounted root (ext3 filesystem) on device 179:1.
189
devtmpfs: mounted
190
Freeing init memory: 164K
191
Failed to mount /sys/kernel/security: No such file or directory
192

    
193
Welcome to The ?
194
ngström Distribution!
195

    
196
Starting LSB: The RPC portmapper...
197
Starting udev Coldplug all Devices...
198
Starting Temporary Directory...
199
Starting Remount API VFS...
200
Started Huge Pages File System                                         [  OK  ]
201
Starting udev Kernel Device Manager...
202
Starting Journal Service...
203
Started Journal Service                                                [  OK  ]
204
Starting Debug File System...
205
udevd[1092]: starting version 182
206
Started Set Up Additional Binary Formats                               [  OK  ]
207
Starting POSIX Message Queue File System...
208
Starting Apply Kernel Variables...
209
Starting Load Kernel Modules...
210
Starting File System Check on Root Device...
211
Started udev Kernel Device Manager                                     [  OK  ]
212
Started LSB: The RPC portmapper                                        [  OK  ]
213
Started Temporary Directory                                            [  OK  ]
214
Started Remount API VFS                                                [  OK  ]
215
Started Debug File System                                              [  OK  ]
216
Started POSIX Message Queue File System                                [  OK  ]
217
Started Apply Kernel Variables                                         [  OK  ]
218
Failed to start Load Kernel Modules                                    [FAILED]
219
See 'systemctl status systemd-modules-load.service' for details.
220
Started File System Check on Root Device                               [  OK  ]
221
Starting Remount Root FS...
222
Started FUSE Control File System                                       [  OK  ]
223
Started Configuration File System                                      [  OK  ]
224
Started udev Coldplug all Devices                                      [  OK  ]
225
Started Remount Root FS                                                [  OK  ]
226
Started Machine ID first boot configure                                [  OK  ]
227
Starting Recreate Volatile Files and Directories...
228
Starting Load Random Seed...
229
Started Run pending postinsts                                          [  OK  ]
230
Started Load Random Seed                                               [  OK  ]
231
Started Recreate Volatile Files and Directories                        [  OK  ]
232
Starting Restore Sound Card State...
233
Starting Networking...
234
Starting Timestamping service...
235
Started Timestamping service                                           [  OK  ]
236
Started SSH Key Generation                                             [  OK  ]
237
Starting D-Bus System Message Bus...
238
Starting Permit User Sessions...
239
Starting Login Service...
240
Starting Avahi mDNS/DNS-SD Stack...
241
Started Restore Sound Card State                                       [  OK  ]
242
Started Permit User Sessions                                           [  OK  ]
243
Starting Serial Getty on ttyS1...
244
Started Serial Getty on ttyS1                                          [  OK  ]
245
Started D-Bus System Message Bus                                       [  OK  ]
246
portmap[1087]: Starting portmap daemon...
247
Started Avahi mDNS/DNS-SD Stack                                        [  OK  ]
248
Started Login Service                                                  [  OK  ]
249

    
250
.---O---.
251
|       |                  .-.           o o
252
|   |   |-----.-----.-----.| |   .----..-----.-----.
253
|       |     | __  |  ---'| '--.|  .-'|     |     |
254
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
255
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
256
                -'  |
257
                '---'
258

    
259
The Angstrom Distribution mityomapl138 ttyS1
260

    
261
Angstrom v2012.05 - Kernel 3.2.0+
262

    
263
mityomapl138 login: root
264
ls
265
Started Networking                                                     [  OK  ]
266
Starting DropBear SSH Server...
267
Last login: Wed Jan  5 09:46:11 UTC 2000 from mitydsp-ubuntu14-6.local on pts/0
268
Started DropBear SSH Server                                            [  OK  ]
269
Starting Getty on tty1...
270
Started Getty on tty1                                                  [  OK  ]
271
root@mityomapl138 ~ $
    (1-1/1)
    Go to top
    Add picture from clipboard (Maximum size: 1 GB)