Project

General

Profile

Activity

From 08/05/2016 to 09/03/2016

09/02/2016

08:10 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Daniel,
I saw the project got pushed, thanks.
When do you think you can put together those instructions for ...
Stephen Snyder

08/24/2016

09:59 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Steve,
I'll cleanup and push the project today. I'll also go through and write down what needs to be updated in...
Daniel Vincelette

08/23/2016

03:52 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
So I'm still not getting any output on my monitors. However, I tried adjusting the monitor settings and I...
Stephen Snyder
02:18 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Sorry about that, it's attached now Daniel Vincelette
01:41 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Can you post that image for me to try? Stephen Snyder
01:34 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Awesome, I'll glad it did work on the TV!
I was able to recreate what I think you're seeing on your monitor. If I ...
Daniel Vincelette
12:32 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Awesome, thanks.
I tried a large screen Samsung HDTV and your latest build works.
I'm hoping that the HDTV's ar...
Stephen Snyder
12:10 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Good catch, I'm doing a build now with the those back porch values. I'll let you know when it's finished. Daniel Vincelette
12:00 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
One thing of note, based on the original qsys file from the wiki page, it seems the back porch values are not the sam... Stephen Snyder
11:51 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
No luck, same result, just a black screen. Stephen Snyder
11:14 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Steve,
Attached is a new image. The only thing I changed was that I updated the output delays for the data/cont...
Daniel Vincelette

08/22/2016

02:10 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
That's ok, thanks for the update Dan. Feel free to post an updated image anytime, even if you don't have a ton of te... Stephen Snyder
02:07 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Steve,
I'm terribly sorry for the radio silence. Unfortunately I've been travelling for the past week so I haven't...
Daniel Vincelette
07:43 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
Any update on this? Have you been able to review the scope shots?
Best,
Steve
Stephen Snyder

08/17/2016

10:35 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
See attached. The index.txt file in the zip package describes each scope shot. Let me know what other me...
Stephen Snyder

08/16/2016

03:35 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
Sure thing, I can take these shots first thing in the morning and get them back to you.
Steve
Stephen Snyder
01:12 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Steve,
Hmm good point that it you've already vetted the monitor you're using. Seeing as you're getting the disp...
Daniel Vincelette
07:39 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
Thanks for the detail on the I2C fix.
I've tested on two monitors. On one of them, I am certain it sup...
Stephen Snyder
03:05 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Jonathan/Dan,
Solved.... Yes, that was the difference in the two kernels, ipv6 was being built as a module in the ...
Brian Wentworth

08/15/2016

04:12 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Hi Brian,
I've updated the wiki for building the kernel and have added steps for building the modules, it can be f...
Daniel Vincelette
03:20 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Both udp6/tcp6 and '::' points to an error with ipv6 support. Looking at your .config file shows ipv6 being built as... Jonathan Cormier
03:05 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Jonathan,
So I built a new kernel setting the base configuration as mitysom5csx_devkit_defconfig without doing the...
Brian Wentworth
03:11 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Steve,
Sorry for the delay, I was travelling Friday afternoon.

To fix for the I2C issue was that I resample...
Daniel Vincelette
10:45 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan,
This image doesn't show anything on my monitor. Upon first booting it, right after the console printed "S...
Stephen Snyder

08/12/2016

03:27 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
I have both the L2_3Y8 and H4_3YA.. Attached is the config file for my 3YA. Dont think it really matters. Both error ... Brian Wentworth
02:25 PM Software Development: RE: Network Communication MitySOM Custom Kernel Configuration
Can you post your .config file?
Thanks
Jonathan Cormier
Jonathan Cormier
02:17 PM Software Development: Network Communication MitySOM Custom Kernel Configuration
Hello,
I have a MitySOM dev board with the 5CSE-H4-3YA. I am able to use the pre-built binary SD card image for ne...
Brian Wentworth
12:15 PM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hi Dan
Thanks for this. I can try the image on Monday and report back results.
Can you provide a little detail...
Stephen Snyder
11:56 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hello Steve,
I've created an alpha SD card image that from my testing has fixed the i2c failures. The filesystem a...
Daniel Vincelette

08/11/2016

10:05 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Dan,
The network stability problem has disappeared after removing the skews. Thanks for the suggestion!
I'll...
Jared Kirschner

08/10/2016

11:12 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Jared,
Looking at the sockit dts(https://github.com/altera-opensource/linux-socfpga/blob/socfpga-4.1.22-ltsi-rt...
Daniel Vincelette
10:38 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hello Dan,
I've been performing more testing on the Altera 4.1.22 LTSI RT branch.
Physical setup: MitySOM 5CSX ...
Jared Kirschner

08/09/2016

10:30 AM FPGA Development: RE: HDMI Output splash screen is intermittently displayed on boot
Hello Steve,
There was a bit of stability issue with the I2C interface to the HDMI transmitter IC. I thought my ne...
Daniel Vincelette
09:43 AM FPGA Development: HDMI Output splash screen is intermittently displayed on boot
Hello,
I'm trying to run the HDMI output image provided on the wiki. I haven't modified anything just written the...
Stephen Snyder
10:24 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Jared,
Glad to hear that worked for you! If you run into trouble getting your defconfig/dts setup how you want ...
Daniel Vincelette
09:40 AM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hello Dan,
Thanks for pushing the dizzy (1.7) branch. I've successfully gotten to the same point you did in your f...
Jared Kirschner

08/05/2016

02:05 PM Software Development: RE: Using PREEMPT_RT on MitySOM 5CSX Dev Board
Hi Jared,
Sorry for the delay.
I just pushed a dizzy(1.7) branch to our git repo: http://support.criticallink.c...
Daniel Vincelette
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)