Project

General

Profile

No DVI and serial output from MityDsp-L138 Industrial I/O board

Added by Phil Chen over 11 years ago

We just got the board from Digi-key.

Module Part Number: L138-FX-225-RC S/N: 110174
I/O Board Number: 80-000268RI-2B S/N: 123981

There is no DVI and serial output when power up. Ethernet is up and I can ping the IP but not telnet.
I wonder if it is pre-loaded with correct image. How do I verify it? Thanks.

Phil


Replies (3)

RE: No DVI and serial output from MityDsp-L138 Industrial I/O board - Added by Bob Duke over 11 years ago

Phil, can you confirm that the serial cable provided with the dev kit has "Null Modem" printed on each connector?

Can you use ssh to connect (not telnet)?

Thanks,

-Bob

RE: No DVI and serial output from MityDsp-L138 Industrial I/O board - Added by Phil Chen about 11 years ago

Hi Bob,

There is no "Null Modem" printed on the serial cable provided with the dev kit. It works now after I put a null modem adapter on the cable. Thanks for prompt response.:)

Phil

RE: No DVI and serial output from MityDsp-L138 Industrial I/O board - Added by Bob Duke about 11 years ago

I'm glad it's working Phil. I'm locking this thread, but if you have any other questions, please let us know.

Thanks,

-Bob

    (1-3/3)
    Go to top
    Add picture from clipboard (Maximum size: 1 GB)