| Serial port 2 issue, RS485, RTS drops to early |
Fred Weiser |
06/25/2024 06:54 PM |
14 |
Added by Fred Weiser 4 months ago
RE: Serial port 2 issue, RS485, RTS drops to early
|
| MityDSP-L138 Power Draw in Deep Sleep? Waking ARM core from DSP core? Power and Sleep Controller (PSC) |
Michael Bisbano |
07/01/2024 06:34 PM |
3 |
Added by Jonathan Cormier 5 months ago
RE: MityDSP-L138 Power Draw in Deep Sleep? Waking ARM cor...
|
| RS485 Direction Control on UART1 |
Michael Bisbano |
06/19/2024 04:36 PM |
5 |
Added by Jonathan Cormier 5 months ago
RE: RS485 Direction Control on UART1
|
| FPGA (FIFO) -> DSP (DMA) transfer problem |
Kyungguk Bok |
06/03/2024 08:57 AM |
5 |
Added by Michael Williamson 5 months ago
RE: FPGA (FIFO) -> DSP (DMA) transfer problem
|
| A CCS Debug issue occurred. |
Kyungguk Bok |
04/29/2024 06:18 AM |
7 |
Added by Jonathan Cormier 6 months ago
RE: A CCS Debug issue occurred.
|
| I have another question regarding EMIF. |
Kyungguk Bok |
04/20/2024 01:24 PM |
6 |
Added by Jonathan Cormier 7 months ago
RE: I have another question regarding EMIF.
|
| DSP FPGA EMIF GPIO Failure |
Kyungguk Bok |
03/04/2024 09:29 AM |
3 |
Added by Jonathan Cormier 8 months ago
RE: DSP FPGA EMIF GPIO Failure
|
| DSP EMIF Example Code |
Kyungguk Bok |
02/07/2024 08:02 AM |
10 |
Added by Jonathan Cormier 9 months ago
RE: DSP EMIF Example Code
|
| linux-v4.19 kernel |
Thomas Catalino |
10/03/2023 03:40 PM |
7 |
Added by Richard Miller-Smith about 1 year ago
RE: linux-v4.19 kernel
|
| MityDSP-L138F I2C bus hang (SDA held low) |
Jon Cox |
09/08/2023 05:38 PM |
1 |
Added by Jonathan Cormier about 1 year ago
RE: MityDSP-L138F I2C bus hang (SDA held low)
|
| Modification of flashing program - sfh_OMAP-L138.exe |
Thomas Catalino |
06/06/2023 01:01 PM |
0 |
|
| Changes on MityDSP-L138 L138-DM-336-RI-J |
Kim Nielsen |
04/26/2023 06:55 AM |
5 |
Added by Michael Williamson over 1 year ago
RE: Changes on MityDSP-L138 L138-DM-336-RI-J
|
| Cannot establish an ethernet connection |
Vadym Kolesnyk |
12/04/2022 10:10 PM |
17 |
Added by Jonathan Cormier over 1 year ago
RE: Cannot establish an ethernet connection
|
| Discussion: Kernel hangs on "Waiting for root device /dev/mmcblk0p1..." |
Vadym Kolesnyk |
03/31/2023 04:01 PM |
11 |
Added by Vadym Kolesnyk over 1 year ago
RE: Discussion: Kernel hangs on "Waiting for root device ...
|
| Increasing CPU clock OMAPL138 |
Kim Nielsen |
03/22/2023 03:14 PM |
12 |
Added by Kim Nielsen over 1 year ago
RE: Increasing CPU clock OMAPL138
|
| Autoboot Linux in terminal |
Yan Yandoff |
06/25/2018 10:28 AM |
5 |
Added by Jonathan Cormier almost 2 years ago
RE: Autoboot Linux in terminal
|
| L138 dsplink problem - schedule while atomic bug |
Fred Weiser |
07/08/2016 11:55 AM |
6 |
Added by Demon Demonof almost 2 years ago
RE: L138 dsplink problem - schedule while atomic bug
|
| meta-mitydsp-l138 issue - SRCREV = "${AUTOREV}" |
Fred Weiser |
08/30/2022 08:07 PM |
2 |
Added by Fred Weiser about 2 years ago
RE: meta-mitydsp-l138 issue - SRCREV = "${AUTOREV}"
|
| Is it possible to use C++ 11? |
Vadym Kolesnyk |
03/30/2022 12:32 PM |
3 |
Added by Jonathan Cormier over 2 years ago
RE: Is it possible to use C++ 11?
|
| Change data between ARM & DSP cores, undefined behaviour |
Yan Yandoff |
08/13/2018 04:33 PM |
5 |
Added by Demon Demonof over 3 years ago
RE: Change data between ARM & DSP cores, undefined behaviour
|
| MityDSP-L138 Starterware Example Code |
Bill Lichtinger |
06/11/2012 11:55 AM |
2 |
Added by Thomas Catalino almost 4 years ago
RE: MityDSP-L138 Starterware Example Code
|
| OMAPL138: DSP Boot from Linux |
Aviv Prital |
07/05/2020 03:57 PM |
1 |
Added by Michael Williamson over 4 years ago
RE: OMAPL138: DSP Boot from Linux
|
| OMAP L132E secure CPU |
Bernd Schmitz |
01/13/2020 04:31 PM |
2 |
Added by Bob Duke almost 5 years ago
RE: OMAP L132E secure CPU
|
| NAND Flash |
Marcin Grzelak |
11/18/2019 12:39 PM |
6 |
Added by Marcin Grzelak almost 5 years ago
RE: NAND Flash
|
| Enabling UART2 for MitydspL138F Expansion port at ARM running Linux |
Aviv Prital |
11/12/2019 03:27 PM |
1 |
Added by Jonathan Cormier about 5 years ago
RE: Enabling UART2 for MitydspL138F Expansion port at ARM...
|
| L138-FX-225-RC not available at Digikey |
Ian St. John |
10/24/2019 08:50 PM |
3 |
Added by Alexander Block about 5 years ago
RE: L138-FX-225-RC not available at Digikey
|
| Loading and running PRU |
Aviv Prital |
08/28/2019 12:49 PM |
1 |
Added by Bob Duke about 5 years ago
RE: Loading and running PRU
|
| Change data between ARM(Linux) - DSP (bare-metal) |
Aviv Prital |
07/17/2019 01:44 PM |
7 |
Added by Jonathan Cormier about 5 years ago
RE: Change data between ARM(Linux) - DSP (bare-metal)
|
| uPP receive clock lower limitation in SDR (Single Data Rate mode) |
Vivek Ponnani |
06/21/2019 08:05 AM |
2 |
Added by Vivek Ponnani over 5 years ago
RE: uPP receive clock lower limitation in SDR (Single Dat...
|
| MityDSPL138 |
VIDYA J |
06/04/2019 07:16 AM |
5 |
Added by Jonathan Cormier over 5 years ago
RE: MityDSPL138
|
| uPP channel B in receives mode missing data from FPGA |
Vivek Ponnani |
05/28/2019 09:10 AM |
0 |
|
| Cannot install the GCC Toolchain for Angström |
Okan Çalış |
09/07/2017 08:24 AM |
9 |
Added by Jonathan Cormier over 5 years ago
RE: Cannot install the GCC Toolchain for Angström
|
| UPP problem |
stephan berner |
09/21/2014 02:51 PM |
3 |
Added by Jonathan Cormier over 5 years ago
RE: UPP problem
|
| Latest MityDSP-L138 U-Boot image |
Mathew Jones |
04/08/2019 02:51 PM |
4 |
Added by Mathew Jones over 5 years ago
RE: Latest MityDSP-L138 U-Boot image
|
| We want to know about SPI for CAN Interface with Linux |
sin-ka kang |
02/18/2019 04:25 PM |
4 |
Added by Jonathan Cormier over 5 years ago
RE: We want to know about SPI for CAN Interface with Linux
|
| Double boot u-Boot |
Oleh Mela |
11/19/2018 11:38 AM |
7 |
Added by Oleh Mela almost 6 years ago
RE: Double boot u-Boot
|
| Uart speed does not change when loading uboot. The variable "baudrate" has no effect. |
Roman Kochkin |
10/11/2018 05:00 PM |
1 |
Added by Jonathan Cormier about 6 years ago
RE: Uart speed does not change when loading uboot. The va...
|
| Auto run of application file (loaded in NAND Flash) |
Vivek Ponnani |
01/23/2018 11:23 AM |
21 |
Added by Jonathan Cormier about 6 years ago
RE: Auto run of application file (loaded in NAND Flash)
|
| kernel panic on virtual machine start |
Vivek Ponnani |
09/23/2018 09:06 AM |
4 |
Added by Tim Iskander about 6 years ago
RE: kernel panic on virtual machine start
|
| Yocto MDK Status |
Tom Riddle |
08/01/2018 12:18 AM |
27 |
Added by Jonathan Cormier about 6 years ago
RE: Yocto MDK Status
|
| Building DspHelloWorld MDK 2018 |
Tom Riddle |
08/10/2018 02:59 AM |
2 |
Added by Tom Riddle over 6 years ago
RE: Building DspHelloWorld MDK 2018
|
| DSP memory configuration |
Vivek Ponnani |
06/28/2018 01:50 PM |
0 |
|
| use of IRAM in the project based on MDK_2014-01-13 |
Vivek Ponnani |
06/22/2018 06:32 PM |
2 |
Added by Vivek Ponnani over 6 years ago
RE: use of IRAM in the project based on MDK_2014-01-13
|
| xmlrpc libs for application |
Tom Riddle |
05/30/2018 09:43 PM |
13 |
Added by Tom Riddle over 6 years ago
RE: xmlrpc libs for application
|
| Launching Linux Application on Startup |
Okan Çalış |
03/21/2018 12:31 PM |
8 |
Added by Jonathan Cormier over 6 years ago
RE: Launching Linux Application on Startup
|
| Kernel panics on custom board: "No init found. Try passing init= option to kernel" |
Okan Çalış |
02/05/2018 05:08 AM |
13 |
Added by Okan Çalış over 6 years ago
RE: Kernel panics on custom board: "No init found. Try pa...
|
| Linux Boot Parameter and NAND Partition |
Okan Çalış |
03/08/2018 12:49 PM |
7 |
Added by Okan Çalış over 6 years ago
RE: Linux Boot Parameter and NAND Partition
|
| Using McASP Rx clock generation module |
Tom Riddle |
01/29/2018 03:11 AM |
6 |
Added by Jonathan Cormier almost 7 years ago
RE: Using McASP Rx clock generation module
|
| SYS/BIOS |
Martin Hantke |
01/23/2018 01:57 PM |
1 |
Added by Martin Hantke almost 7 years ago
RE: SYS/BIOS
|
| uPP on MityDsp |
Martin Hantke |
01/17/2018 02:24 PM |
4 |
Added by Martin Hantke almost 7 years ago
RE: uPP on MityDsp
|
| IPC and uPP interrupts APIs conflict |
Okan Çalış |
01/09/2018 01:37 PM |
4 |
Added by Jonathan Cormier almost 7 years ago
RE: IPC and uPP interrupts APIs conflict
|
| Linux USB Gadget is not working on custom board |
Okan Çalış |
01/10/2018 11:37 AM |
9 |
Added by Jonathan Cormier almost 7 years ago
RE: Linux USB Gadget is not working on custom board
|
| Real time signal input and output with uPP interface in MityDSP |
Vivek Ponnani |
01/04/2018 02:06 PM |
0 |
|
| Changing UART1 to UART2 in Linux Kernel |
Okan Çalış |
12/27/2017 05:32 AM |
1 |
Added by Okan Çalış almost 7 years ago
RE: Changing UART1 to UART2 in Linux Kernel
|
| Low frequency input (5 Hz to 20KHz processing) for mitydspl138F |
Vivek Ponnani |
12/21/2017 11:56 AM |
0 |
|
| Loading kernel to SPI flash and Root file system .jffs2 to NAND. |
Vivek Ponnani |
12/11/2017 02:24 PM |
1 |
Added by Jonathan Cormier almost 7 years ago
RE: Loading kernel to SPI flash and Root file system .jff...
|
| Interrupts Between Linux and DSP without BIOS |
Okan Çalış |
12/01/2017 10:52 AM |
2 |
Added by Jonathan Cormier almost 7 years ago
RE: I
|
| How to activate splash screen |
Andri Haryono |
11/28/2017 09:00 AM |
4 |
Added by Jonathan Cormier almost 7 years ago
RE: How to activate splash screen
|
| creating a new rootfilesystem |
Tom Riddle |
11/15/2017 10:08 PM |
11 |
Added by Tom Riddle almost 7 years ago
RE: creating a new rootfilesystem
|
| MityDSP L138 DSP Timer |
Vibhakar Vemulapati |
11/13/2017 10:40 PM |
1 |
Added by Jonathan Cormier about 7 years ago
RE: MityDSP L138 DSP Timer
|
| SysLink Configuration |
Okan Çalış |
10/30/2017 11:17 AM |
8 |
Added by Okan Çalış about 7 years ago
RE: SysLink Configuration
|
| Setting the ARM as a USB bulk device |
Okan Çalış |
10/09/2017 11:29 AM |
23 |
Added by Okan Çalış about 7 years ago
RE: Setting the ARM as a USB bulk device
|
| Using SigProc Example |
Tom Riddle |
10/25/2017 04:41 PM |
2 |
Added by Tom Riddle about 7 years ago
RE: Using SigProc Example
|
| Updating devkit to latest MDK tftp issue |
Jorden Luke |
10/24/2017 02:53 PM |
3 |
Added by Jonathan Cormier about 7 years ago
RE: Updating devkit to latest MDK tfpt issue
|
| Configuring MityDSP for 256MB DRAM |
Tom Riddle |
10/17/2017 10:20 PM |
10 |
Added by Tom Riddle about 7 years ago
RE: Configuring MityDSP for 256MB DRAM
|
| MityDSP L138, using UART1 from the DSP |
Vibhakar Vemulapati |
10/22/2017 02:27 PM |
1 |
Added by Jonathan Cormier about 7 years ago
RE: MityDSP L138, using UART1 from the DSP
|
| Blackhawk XDS560v2-USB Debugger gel file |
Andri Haryono |
10/08/2017 11:07 AM |
1 |
Added by Jonathan Cormier about 7 years ago
RE: Blackhawk XDS560v2-USB Debugger gel file
|
| TCF/TCI file questions |
Tom Riddle |
10/13/2017 04:34 PM |
1 |
Added by Jonathan Cormier about 7 years ago
RE: TCF/TCI file questions
|
| Inter-Processor Communication between ARM & DSP |
Okan Çalış |
09/19/2017 05:48 AM |
9 |
Added by Okan Çalış about 7 years ago
RE: Inter-Processor Communication between ARM & DSP
|
| MDK version? |
Tom Riddle |
09/27/2017 07:03 PM |
2 |
Added by Tom Riddle about 7 years ago
RE: MDK version?
|
| Touchscreen is not detected |
Andri Haryono |
08/14/2017 02:28 PM |
5 |
Added by Jonathan Cormier about 7 years ago
RE: Touchscreen is not detected
|
| MityDSP L138F : The Linux kernel panics |
Okan Çalış |
09/04/2017 07:25 PM |
7 |
Added by Okan Çalış about 7 years ago
RE: MityDSP L138F : The Linux kernel panics
|
| SPI interface for ADC5560 (MityDSP L138F) |
Vivek Ponnani |
06/30/2017 01:19 PM |
7 |
Added by Vivek Ponnani over 7 years ago
RE: SPI interface for ADC5560 (MityDSP L138F)
|
| Using Sodium crypto library and not enough entropy? |
Edwin McKay |
07/24/2017 03:38 PM |
1 |
Added by Jonathan Cormier over 7 years ago
RE: Using Sodium crypto library and not enough entropy?
|
| Syslink configuration for 256Mb memory |
Andri Haryono |
07/15/2017 06:16 PM |
1 |
Added by Gregory Gluszek over 7 years ago
RE: Syslink configuration for 256Mb memory
|
| Big memory leak |
ahmed Elmenshawy |
07/14/2017 06:45 PM |
1 |
Added by Dominic Giambo over 7 years ago
RE: Big memory leak
|
| To make the connection between DSP / ARM cores on MityDSP-L138 |
Vasya Ivanov |
06/26/2017 05:58 AM |
1 |
Added by Alexander Block over 7 years ago
RE: To make the connection between DSP / ARM cores on Mit...
|
| data exchange |
Vasya Ivanov |
06/26/2017 06:11 AM |
1 |
Added by Jonathan Cormier over 7 years ago
RE: data exchange
|
| How to load Linux Kernel and files system with no Ethernet port |
Vivek Ponnani |
05/01/2017 07:00 AM |
33 |
Added by Jonathan Cormier over 7 years ago
RE: How to load Linux Kernel and files system with no Eth...
|
| MityDSP-L138 ARM Bare Metal Development - Code Composer Studio 7 |
Rik Anderson |
06/12/2017 09:56 AM |
1 |
Added by Michael Williamson over 7 years ago
RE: MityDSP-L138 ARM Bare Metal Development - Code Compos...
|
| MityDSP-L138F - External SPI access from "Industrial IO Development Kit" |
Mathew Jones |
11/10/2015 02:58 AM |
4 |
Added by Jonathan Cormier over 7 years ago
RE: MityDSP-L138F - External SPI access from "Industrial ...
|
| Increasing Memory RAM |
Jesus Alejandro Alvarez Trejo |
06/01/2017 09:37 PM |
1 |
Added by Alexander Block over 7 years ago
RE: Increasing Memory RAM
|
| Virtual SPI device setup and access using spidev |
Gianni Casonato |
05/18/2017 08:00 PM |
6 |
Added by Jonathan Cormier over 7 years ago
RE: Virtual SPI device setup and access using spidev
|
| How to configure LCD with L138-FX-225-RC ? |
Andri Haryono |
05/10/2017 05:35 PM |
1 |
Added by Jonathan Cormier over 7 years ago
RE: How to configure LCD with L138-FX-225-RC ?
|
| mcp2515 overruns |
edward lambert |
04/26/2017 08:41 AM |
8 |
Added by Gregory Gluszek over 7 years ago
RE: mcp2515 overruns
|
| Failed to reprogram dead board |
Andri Haryono |
04/26/2017 06:26 AM |
3 |
Added by Andri Haryono over 7 years ago
RE: Failed to reprogram dead board
|
| DSP Quick start - with Linux OS |
Paul Strutt |
05/09/2017 02:51 PM |
1 |
Added by Jonathan Cormier over 7 years ago
RE: DSP Quick start - with Linux OS
|
| how to connect usrp b100 with mitydsp oml138 |
ahmed Elmenshawy |
04/30/2017 02:33 PM |
2 |
Added by Jonathan Cormier over 7 years ago
RE: how to connect usrp b100 with mitydsp oml138
|
| Mitydspl138f |
Salma Khaled |
04/30/2017 06:37 AM |
0 |
|
| Does BUSY led mean something on factory new board? |
Jacek Drewniak |
04/04/2017 08:18 AM |
9 |
Added by Alexander Block over 7 years ago
RE: Does BUSY led mean something on factory new board?
|
| eMMC support |
François Tremblay |
03/31/2017 11:01 AM |
3 |
Added by François Tremblay over 7 years ago
RE: eMMC support
|
| Trying to cross compile libsodium. |
Edwin McKay |
04/01/2017 02:24 AM |
6 |
Added by Edwin McKay over 7 years ago
RE: Trying to cross compile libsodium.
|
| Downloading files from Redmine (using Linux console app) |
Fred Weiser |
02/09/2016 09:05 AM |
2 |
Added by Jonathan Cormier over 7 years ago
RE: Downloading files from Redmine (using Linux console app)
|
| Serial communication (UART) through MitySOM-1810F PROFIBUS |
Jesus Alejandro Alvarez Trejo |
03/22/2017 06:57 PM |
3 |
Added by Jesus Alejandro Alvarez Trejo over 7 years ago
RE: Serial communication (UART) through MitySOM-1810F PRO...
|
| Setting up MityDSP-L138 for Hello World program |
Artem Khotab |
02/22/2017 05:58 AM |
4 |
Added by Artem Khotab over 7 years ago
RE: Setting up MityDSP-L138 for Hello World program
|
| Programming the FPGA - Loading via CPU |
Jesus Alejandro Alvarez Trejo |
01/12/2017 12:45 PM |
4 |
Added by Jesus Alejandro Alvarez Trejo almost 8 years ago
RE: Programming the FPGA - Loading via CPU
|
| SATA link down |
yilin wang |
05/22/2013 04:53 AM |
4 |
Added by Michael Williamson almost 8 years ago
RE: SATA link down
|
| Programming the FPGA |
Jesus Alejandro Alvarez Trejo |
01/12/2017 11:05 AM |
1 |
Added by Michael Williamson almost 8 years ago
RE: Programming the FPGA
|
| MityDSP boot problem |
caner akcin |
11/25/2016 08:25 AM |
5 |
Added by caner akcin almost 8 years ago
RE: MityDSP boot problem
|
| Java Runtime Environment for MitySOM1810f |
Hector Bojorquez |
10/03/2016 11:11 AM |
8 |
Added by Bob Duke about 8 years ago
RE: Java Runtime Environment for MitySOM1810f
|
| Mity DSP L138F program |
Nourhan Elsayed |
09/18/2016 09:19 AM |
19 |
Added by Jonathan Cormier about 8 years ago
RE: Mity DSP L138F program
|
| Problems with the first time configuration |
Hector Bojorquez |
05/20/2016 02:14 PM |
35 |
Added by Jonathan Cormier about 8 years ago
RE: Problems with the first time configuration
|
| Need Help for Audio MityDSP-L138F. DSP Platforms. No Linux Based |
riyanto fisika |
08/26/2016 12:12 AM |
2 |
Added by riyanto fisika about 8 years ago
RE: Need Help for Audio MityDSP-L138F. DSP Platforms. No ...
|
| SPI1 controller, access to FLASH and carrier board. NOT linux based. |
Ian St. John |
07/05/2016 10:18 AM |
6 |
Added by Jonathan Cormier over 8 years ago
RE: SPI1 controller, access to FLASH and carrier board. N...
|
| kernel 3.2 - tcpip stack latency |
Patrice Bastiaens |
06/21/2016 06:26 AM |
2 |
Added by Patrice Bastiaens over 8 years ago
RE: kernel 3.2 - tcpip stack latency
|
| Flashing a new kernel to NOR from Linux rather than u-boot |
Fred Weiser |
06/16/2016 05:26 PM |
3 |
Added by Fred Weiser over 8 years ago
RE: Flashing a new kernel to NOR from Linux rather than u...
|
| How to configure the GPIOs as outputs? |
Hector Bojorquez |
06/15/2016 03:11 PM |
2 |
Added by Jonathan Cormier over 8 years ago
RE: How to configure the GPIOs as outputs?
|
| Specifics on reserving DDR for PRU/ARM shared use |
Andrew Bean |
06/10/2016 12:20 PM |
2 |
Added by Bob Duke over 8 years ago
RE: Specifics on reserving DDR for PRU/ARM shared use
|
| JFFS2 "scheduling while atomic" problem with L138 running linux kernel 3.2 |
Fred Weiser |
06/13/2016 10:18 AM |
6 |
Added by Bob Duke over 8 years ago
RE: JFFS2 "scheduling while atomic" problem with L138 run...
|
| Pinmux changes back on its own |
Andrew Bean |
05/27/2016 07:23 PM |
10 |
Added by Andrew Bean over 8 years ago
RE: Pinmux changes back on its own
|
| Instructions to get going with the OMAP PWM |
Andrew Bean |
05/25/2016 11:30 PM |
1 |
Added by Jonathan Cormier over 8 years ago
RE: Instructions to get going with the OMAP PWM
|
| PRU_gpioToggle example fails sometimes |
Andrew Bean |
05/23/2016 07:53 PM |
5 |
Added by Andrew Bean over 8 years ago
RE: PRU_gpioToggle example fails sometimes
|
| Starter Guide: "Boot the MityDSP-L138 up into linux." - How? |
Jeff Benshetler |
07/23/2012 07:25 PM |
11 |
Added by Jonathan Cormier over 8 years ago
RE: Starter Guide: "Boot the MityDSP-L138 up into linux."...
|
| PRU svn authentication failed |
Andrew Bean |
05/13/2016 03:05 PM |
5 |
Added by Andrew Bean over 8 years ago
RE: PRU svn authentication failed
|
| Emulator stops working very often. |
Edwin McKay |
04/21/2016 10:49 AM |
2 |
Added by Dave Stehlik over 8 years ago
RE: Emulator stops working very often.
|
| Cannot run multiple times my ARM/DSP application |
François Tremblay |
06/01/2012 09:16 AM |
7 |
Added by Edwin McKay over 8 years ago
RE: Cannot run multiple times my ARM/DSP application
|
| iproute2 for SocketCAN with 3.2 Kernel |
edward lambert |
05/04/2016 03:48 AM |
2 |
Added by edward lambert over 8 years ago
RE: iproute2 for SocketCAN with 3.2 Kernel
|
| ifup / ifdown Equivalent for systemd |
Ben Atkinson |
04/15/2016 10:48 AM |
2 |
Added by Bob Duke over 8 years ago
RE: ifup / ifdown Equivalent for systemd
|
| Linker memory layout. |
Edwin McKay |
03/24/2016 04:04 PM |
2 |
Added by Edwin McKay over 8 years ago
RE: Linker memory layout.
|
| DDR configuration for AISgen on MityDSP-L138 |
Friedrich Feichtinger |
04/26/2016 09:14 AM |
0 |
|
| WFI and Bluetoth support |
steven poffenbarger |
04/22/2016 08:56 AM |
2 |
Added by steven poffenbarger over 8 years ago
RE: WFI and Bluetoth support
|
| No Prompt from Uboot |
Ian St. John |
04/15/2016 11:29 AM |
10 |
Added by Ian St. John over 8 years ago
RE: No Prompt from Uboot
|
| Any special thing to get new ObjectXXX to work. |
Edwin McKay |
04/15/2016 05:26 PM |
1 |
Added by Gregory Gluszek over 8 years ago
RE: Any special thing to get new ObjectXXX to work.
|
| Problem using XDS200 USB emulator. |
Edwin McKay |
04/07/2016 03:15 PM |
15 |
Added by Dave Stehlik over 8 years ago
RE: Problem using XDS200 USB emulator.
|
| gcc 4.8.4 l38F link can't resolve POOL_translateAddr |
steven poffenbarger |
04/06/2016 12:08 PM |
3 |
Added by Bob Duke over 8 years ago
RE: gcc 4.8.4 l38F link can't resolve POOL_translateAddr
|
| How to Enable a systemd Unit Template for Boot Execution |
Ben Atkinson |
03/31/2016 11:51 AM |
10 |
Added by Bob Duke over 8 years ago
RE: How to Enable a systemd Unit Template for Boot Execution
|
| inline functions and derived classes.... |
Edwin McKay |
03/31/2016 11:17 AM |
1 |
Added by Edwin McKay over 8 years ago
RE: inline functions and derived classes....
|
| STL hash maps and hash sets. CCS5 & CCS 6. |
Edwin McKay |
03/29/2016 11:09 AM |
3 |
Added by Jonathan Cormier over 8 years ago
RE: STL hash maps and hash sets. CCS5 & CCS 6.
|
| Where are some standard C/C++ functions? toupper, vprintf? for the DSP 5.4 |
Edwin McKay |
03/21/2016 12:28 PM |
4 |
Added by Jonathan Cormier over 8 years ago
RE: Where are some standard C/C++ functions? toupper, vp...
|
| StarterWare sample code. |
Edwin McKay |
03/14/2016 01:01 PM |
3 |
Added by Edwin McKay over 8 years ago
RE: StarterWare sample code.
|
| opkg update for ALPHA Release 2016.01 |
Ben Atkinson |
02/23/2016 08:54 AM |
4 |
Added by Ben Atkinson over 8 years ago
RE: opkg update for ALPHA Release 2016.01
|
| gcc 4.8 for OMAP-L138 |
Ben Atkinson |
12/17/2015 04:25 PM |
26 |
Added by Ben Atkinson almost 9 years ago
RE: gcc 4.8 for OMAP-L138
|
| MityDSP-L138F - Qt application not seeing USB keyboard |
Mathew Jones |
01/18/2016 04:42 AM |
8 |
Added by Mathew Jones almost 9 years ago
RE: MityDSP-L138F - Qt application not seeing USB keyboard
|
| DVI Framebuffer (fpga i2c) problem |
Mathew Jones |
12/03/2015 03:34 AM |
8 |
Added by Michael Williamson almost 9 years ago
RE: DVI Framebuffer (fpga i2c) problem
|
| NAND Flash garbage collector and performance issues |
Fred Weiser |
10/22/2015 05:11 PM |
6 |
Added by Jonathan Cormier almost 9 years ago
RE: NAND Flash garbage collector and performance issues
|
| LCD Framebuffer Problem |
Se-Sang Mun |
11/17/2015 10:52 PM |
6 |
Added by Alexander Block almost 9 years ago
RE: LCD Framebuffer Problem
|
| OMAP L138 Cross-Compiling on Ubuntu 14.04 LTS |
Ben Atkinson |
11/06/2015 10:46 AM |
8 |
Added by Jonathan Cormier almost 9 years ago
RE: OMAP L138 Cross-Compiling on Ubuntu 14.04 LTS
|
| Open Embedded build error |
Joel Seidman |
04/10/2013 09:50 PM |
3 |
Added by Jonathan Cormier about 9 years ago
RE: Open Embedded build error
|
| NAND Flash reading problem |
Ahmed Shaaban |
08/30/2015 08:14 AM |
7 |
Added by Ahmed Shaaban about 9 years ago
RE: NAND Flash reading problem
|
| Real time SATA writes |
Mary Frantz |
06/20/2014 02:17 PM |
4 |
Added by Mary Frantz about 9 years ago
RE: Real time SATA writes
|
| FPGA load fail |
Bruce Kenny |
05/07/2015 08:35 AM |
15 |
Added by Alexander Block over 9 years ago
RE: FPGA load fail
|
| USB Bug within U-boot |
Benedikt K. |
06/08/2015 04:56 AM |
1 |
Added by Jonathan Cormier over 9 years ago
RE: USB Bug within U-boot
|
| Serial flash of u-boot-ubl.bin not working |
Ian St. John |
06/04/2015 09:52 AM |
14 |
Added by Jonathan Cormier over 9 years ago
RE: Serial flash of u-boot-ubl.bin not working
|
| DSP core starting |
Oleh Mela |
04/22/2015 09:22 AM |
8 |
Added by Oleh Mela over 9 years ago
RE: DSP core starting
|
| Pull-up Enable for MityDSP L138 (cp[0]) |
Ronald Kabler |
03/25/2015 10:55 AM |
1 |
Added by Jonathan Cormier over 9 years ago
RE: Pull-up Enable for MityDSP L138 (cp[0])
|
| Write to SharedMem from DSP and read it from ARM |
stefan nielsen |
01/20/2015 03:25 AM |
11 |
Added by Frank C over 9 years ago
RE: Write to SharedMem from DSP and read it from ARM
|
| MDK_2012-08-10 default configuration |
Lars Majlof |
03/13/2013 10:55 AM |
12 |
Added by Jonathan Cormier over 9 years ago
RE: MDK_2012-08-10 default configuration
|
| Alter Ethernet MAC |
Mostafa Afgani |
02/17/2015 11:01 AM |
3 |
Added by Mostafa Afgani over 9 years ago
RE: Alter Ethernet MAC
|
| Interrupt source code for DSP |
Stefan Krassin |
01/08/2015 08:29 AM |
7 |
Added by Stefan Krassin almost 10 years ago
RE: Interrupt source code for DSP
|
| u-boot problem |
Oleh Mela |
01/13/2015 04:31 AM |
7 |
Added by Oleh Mela almost 10 years ago
RE: u-boot problem
|
| Simple Code/Doc for FPGA toggle of GPIO from DSP |
stefan nielsen |
12/23/2014 06:28 AM |
7 |
Added by stefan nielsen almost 10 years ago
RE: Simple Code/Doc for FPGA toggle of GPIO from DSP
|
| DSP/BIOS issue MityDSP-L138 |
Oleh Mela |
12/09/2014 06:06 AM |
2 |
Added by Oleh Mela almost 10 years ago
RE: DSP/BIOS issue MityDSP-L138
|
| mtd->read() returned ECC error |
Chris Coonan |
12/08/2014 03:56 PM |
5 |
Added by Jonathan Cormier almost 10 years ago
RE: mtd->read() returned ECC error
|
| inotify issue |
Chris Coonan |
11/22/2014 12:09 PM |
3 |
Added by Chris Coonan almost 10 years ago
RE: inotify issue
|
| FPGA configuration via u-Boot problem |
Stefan Krassin |
11/14/2014 07:30 AM |
2 |
Added by Gregory Gluszek almost 10 years ago
RE: FPGA configuration via u-Boot problem
|
| GP0[4] state on boot for L138F |
Mostafa Afgani |
09/25/2014 03:28 PM |
4 |
Added by Mostafa Afgani about 10 years ago
RE: GP0[4] state on boot for L138F
|
| USB Bug |
Benedikt K. |
09/22/2014 09:22 AM |
5 |
Added by Jonathan Cormier about 10 years ago
RE: USB Bug
|
| Adding SPI flash |
Mary Frantz |
09/11/2014 01:20 PM |
6 |
Added by Mary Frantz about 10 years ago
RE: Adding SPI flash
|
| DSP HelloWorld Message Queue Buffer Length |
Doug Browning |
09/10/2014 10:01 AM |
2 |
Added by Doug Browning about 10 years ago
RE: DSP HelloWorld Message Queue Buffer Length
|
| How to probe the fpga_ctrl & fpga_gpio.ko module |
HYUNG KI KIM |
08/19/2014 08:23 AM |
5 |
Added by Jonathan Cormier about 10 years ago
RE: How to probe the fpga_ctrl & fpga_gpio.ko module
|
| DSP HelloWorld Compile with gcc 4.3.3 |
Doug Browning |
08/06/2014 02:37 PM |
6 |
Added by Jonathan Cormier over 10 years ago
RE: DSP HelloWorld Compile with gcc 4.3.3
|
| How to enable PRU Subsystem on MityDSP-L138F SOM ??? |
Ngoc Thanh Pham |
07/11/2014 03:22 AM |
11 |
Added by Jonathan Cormier over 10 years ago
RE: How to enable PRU Subsystem on MityDSP-L138F SOM ???
|
| I2C 0x8 Address |
Angelos Spanos |
07/28/2014 07:44 AM |
37 |
Added by Jonathan Cormier over 10 years ago
RE: I2C 0x8 Address
|
| Start Guide : Cannot build helloworld application with eclipse |
minh tung |
04/08/2013 12:58 AM |
7 |
Added by Jonathan Cormier over 10 years ago
RE: Start Guide : Cannot build helloworld application wit...
|
| uPP receiving problem |
Silvano Bertoldo |
07/21/2014 09:05 AM |
12 |
Added by Gregory Gluszek over 10 years ago
RE: uPP receiving problem
|
| uBoot and USB using L138F SoM |
Simon Edwards |
07/11/2014 11:19 AM |
9 |
Added by Jonathan Cormier over 10 years ago
RE: uBoot and USB using L138F SoM
|
| uPP delay between transmissions |
Udi Fuchs |
06/27/2014 08:36 PM |
8 |
Added by Udi Fuchs over 10 years ago
RE: uPP delay between transmissions
|
| Linker error on DSP application with Code Composer 6 |
Silvano Bertoldo |
07/01/2014 11:55 AM |
3 |
Added by Silvano Bertoldo over 10 years ago
RE: Linker error on DSP application with Code Composer 6
|
| MSGQ - Message Queue Manager problem |
Silvano Bertoldo |
07/02/2014 11:49 AM |
0 |
|
| SSD on MityDSP-L138F |
Hannes Klas |
06/25/2014 05:41 AM |
1 |
Added by Bob Duke over 10 years ago
RE: SSD on MityDSP-L138F
|
| Where to download the document about Memory Map and Register Address of IO Board 80-000268RI-2C and OMAPL138F |
yanqing lu |
06/25/2014 10:58 PM |
2 |
Added by Jonathan Cormier over 10 years ago
RE: Where to download the document about Memory Map and R...
|
| Interrupting the ARM from the DSP |
Mary Frantz |
06/24/2014 02:08 PM |
4 |
Added by Mary Frantz over 10 years ago
RE: Interrupting the ARM from the DSP
|
| USB2.0 Host on MityDSP-L138F |
Hannes Klas |
06/16/2014 07:15 AM |
21 |
Added by Hannes Klas over 10 years ago
RE: USB2.0 Host on MityDSP-L138F
|
| TPS65023 VDCDC2 and VDCDC3 constraints |
Andrey Mozzhuhin |
06/19/2014 07:39 AM |
6 |
Added by Andrey Mozzhuhin over 10 years ago
RE: TPS65023 VDCDC2 and VDCDC3 constraints
|
| DSP HelloWorld |
Udi Fuchs |
06/05/2014 06:28 PM |
2 |
Added by Udi Fuchs over 10 years ago
RE: DSP HelloWorld
|
| Login uncorrect from serial connection and correct from ethernet connetion |
Silvano Bertoldo |
06/05/2014 06:34 AM |
10 |
Added by Bob Duke over 10 years ago
RE: Login uncorrect from serial connection and correct fr...
|
| Kernel loading module problems MityDSP and FPGA configuration |
Silvano Bertoldo |
05/29/2014 07:38 AM |
13 |
Added by Silvano Bertoldo over 10 years ago
RE: Kernel loading module problems MityDSP and FPGA confi...
|
| How to run bin application via u-boot? |
Ahmed Shaaban |
05/28/2014 09:04 AM |
9 |
Added by Ahmed Shaaban over 10 years ago
RE: How to run bin application via u-boot?
|
| Compiler does not run in VM |
Tom Tatakis |
05/29/2014 09:26 AM |
2 |
Added by Jonathan Cormier over 10 years ago
RE: Compiler does not run in VM
|
| UPP ISR is not called |
Ahmed Shaaban |
05/14/2014 09:58 AM |
1 |
Added by Ahmed Shaaban over 10 years ago
RE: UPP ISR is not called
|
| DSP- EDMA Transmission problem |
Rafał Krawczyk |
12/20/2013 10:33 AM |
19 |
Added by Rafał Krawczyk over 10 years ago
RE: DSP- EDMA Transmission problem
|
| EMIF Clock in U-Boot |
Benedikt K. |
02/23/2014 08:08 AM |
1 |
Added by Michael Williamson over 10 years ago
RE: EMIF Clock in U-Boot
|
| DSP DMA crashes Linux |
Lars Majlof |
09/17/2013 11:57 AM |
12 |
Added by David Rice over 10 years ago
RE: DSP DMA crashes Linux
|
| DspFpgaGpio.cpp: i f (Bank > mnNumBanks) return -1 |
John Cumming |
05/02/2014 01:54 PM |
1 |
Added by Michael Williamson over 10 years ago
RE: DspFpgaGpio.cpp: i f (Bank > mnNumBanks) return -1
|
| Not able to update opkg on MityDSP-L138 |
Nick Waite |
04/09/2014 06:12 PM |
4 |
Added by Jonathan Cormier over 10 years ago
RE: Not able to update opkg on MityDSP-L138
|
| Problem adding a package to LucidLynx Ubuntu Image |
Rich Bagdazian |
04/16/2014 01:17 PM |
3 |
Added by Jonathan Cormier over 10 years ago
RE: Problem adding a package to LucidLynx Ubuntu Image
|
| Enabling I2C1 on the OMAP-L138F |
Mostafa Afgani |
04/14/2014 12:46 PM |
3 |
Added by Mostafa Afgani over 10 years ago
RE: Enabling I2C1 on the OMAP-L138F
|
| Error while connecting to ARM9 |
Ahmed Shaaban |
03/19/2014 07:08 PM |
1 |
Added by Alexander Block over 10 years ago
RE: Error while connecting to ARM9
|
| MityDSP-L138 CCS 5.5 XDS510 |
Steve DeLaney |
04/09/2014 05:00 PM |
1 |
Added by Alexander Block over 10 years ago
RE: MityDSP-L138 CCS 5.5 XDS510
|
| How to add ifplugd to Busybox |
Mary Frantz |
02/28/2014 10:43 AM |
8 |
Added by Bob Duke over 10 years ago
RE: How to add ifplugd to Busybox
|
| DSPLink library sources |
Rafał Krawczyk |
04/10/2014 11:25 AM |
2 |
Added by Rafał Krawczyk over 10 years ago
RE: DSPLink library sources
|
| spi1 usage in a custom board |
Ehsan Kooh |
04/08/2014 09:37 AM |
3 |
Added by Michael Williamson over 10 years ago
RE: spi1 usage in a custom board
|
| Net: No ETH PHY detected!!! |
Jordi Perez Serra |
04/07/2014 10:53 AM |
1 |
Added by Jordi Perez Serra over 10 years ago
RE: Net: No ETH PHY detected!!!
|
| GEL-file for MityDSP-L138F |
Oleh Mela |
03/24/2014 09:38 AM |
1 |
Added by Michael Williamson over 10 years ago
RE: GEL-file for MityDSP-L138F
|
| "Breaking into" uboot |
Jordi Perez Serra |
03/07/2014 05:23 AM |
5 |
Added by Jordi Perez Serra over 10 years ago
RE: "Breaking into" uboot
|
| I2C Bus |
Bruce Kenny |
02/18/2014 06:05 AM |
7 |
Added by Ed Smith over 10 years ago
RE: I2C Bus
|
| MityDSP-L138F SoM initial flash configuration |
François Tremblay |
02/26/2014 09:21 AM |
1 |
Added by Jonathan Cormier over 10 years ago
RE: MityDSP-L138F SoM initial flash configuration
|
| Why is MityDSP-L138F UPP transmit sometimes giving UOR events |
Marc Postema |
02/17/2014 06:05 AM |
11 |
Added by Marc Postema over 10 years ago
RE: Why is MityDSP-L138F UPP transmit sometimes giving UO...
|
| "Using TI C64x+ IMGLIB on OMAPL138F" |
Naveen K.S |
01/08/2014 03:08 AM |
6 |
Added by Bob Duke almost 11 years ago
RE: "Using TI C64x+ IMGLIB on OMAPL138F"
|
| How to reserve EDMA for DSP |
Mary Frantz |
02/04/2014 01:07 PM |
3 |
Added by Mary Frantz almost 11 years ago
RE: How to reserve EDMA for DSP
|
