Forums » Software Development »
AM62A module SODIMM pinout documentation error
Added by Pal Szabo 28 days ago
In the AM62A module datasheet page 17 there seems to be an error for the SODIMM pin 255. It is indicated to be connected to AM62A ball B11, but it is actually connected to C10 instead. It is important for the pinmux configuration or editing the device tree.
Replies (2)
RE: AM62A module SODIMM pinout documentation error - Added by Jonathan Cormier 27 days ago
You are correct. Thanks for bringing this to our attention.
RE: AM62A module SODIMM pinout documentation error - Added by William Evans 27 days ago
Pal,
While going over the SODIMM pinout in our datasheet I noticed a couple more errors. We are working releasing a new revision to the datasheet but in the meantime the other issues are listed below:
External connector pin 99 signal should be RGMII2_TXC (it is RGMII2_RD2 in the datasheet).
External connector pin 101 signal should be RGMII2_TD2 (it is RGMII2_TXC in the datasheet).
External connector pin 103 signal should be RGMII2_RD2 (it is RGMII2_TD2 in the datasheet).
External connector pin 247 is connected to ball D13 (it is E12 in the datasheet).
External connector pin 249 is connected to ball E13 (it is D9 in the datasheet).
External connector pin 255 is connected to ball C10 (it is B11 in the datasheet) as you've pointed out above.
