Project

General

Profile

WEC 2013 SW Details

Critical Link has partnered with Adeneo Embedded to provide our MitySOM-335x Windows support. The Binary windows WEC2013 that is provided on our Wiki is designed to be used with our Development Board only and provides support as follows:

Module: Any module with 512MB of DDR3 memory
CPU Speeds: 720Mhz and 600Mhz (Contact us about support for 800Mhz and 1GHz)
RAM: 512MB DDR3 RAM Module
NAND: Please Contact Critical Link for the status
Ethernet Phy(s): Vitesse VSC8601 (on most Critical Link development kit boards). Others are supported please contact us with the phy you would like to use.
Display: HDMI and NL10276BC13-01 1024x768 6.5" LCD with resistive touch screen
GPIO: Driver for reading and writing
USB: USB 0 and USB1
SD card: Supported on MMC0
UART: Driver present and configured for development kit UART3 and UART4 expansion ports
SPI: Driver Present
I2C: Driver Present
CAN: Driver Present
Audio: Not supported

Please contact Critical Link to find out information on obtaining a Source Code BSP.

Go to top
Add picture from clipboard (Maximum size: 600 MB)