Activity
From 01/09/2022 to 02/07/2022
01/28/2022
- DV 07:35 PM Software Development: RE: MitySOM 5CSX-H6-53B-RC not booting
- Hi Franz,
We do have a reference SD card for the 5CSX-H6-53B on our wiki page: https://support.criticallink.com/redmine/projects/mityarm-5cs/wiki#Variant-Specific
Here is a direct link to that SD card: https://support.criticallink.... - Hello,
We are having some difficulties getting the MitySOM 5CSX-H6-53B-RC board to boot with our firmware, we get the following error with SDRAM shown in attached image. Our firmware works fine with the MitySOM 5CSX-H6-42A-RC and we a...
01/14/2022
- FS 02:58 AM Software Development: RE: MitySOM 5CSX SPI device not showing up in /dev
- Hello Daniel,
We tried changing the keyword to *rohm,dh2228fv* but it still does not show up in /dev/. Is there anything that might be missing from the kernel? We did add “CONFIG_SPI_SPIDEV=y” but is there more needed? You linked a sp...
01/11/2022
- JB 06:17 AM FPGA Development: RE: U-Boot Network Setup (MitySOM-5CSX-H6-42A)
- That did it.
01/10/2022
- ZM 03:10 PM FPGA Development: RE: U-Boot Network Setup (MitySOM-5CSX-H6-42A)
- Hi Jose,
You can make the following changes to the U-Boot environment to enable Ethernet: - JB 07:32 AM FPGA Development: RE: U-Boot Network Setup (MitySOM-5CSX-H6-42A)
- Hey Mike,
Yes, I have a 300Mbps switch, but I can test it in a faster one. I am also testing it in the devkit, not the custom board.
When yocto comes up, it looks like it is able to get to 100Mbps: - MW 03:37 AM FPGA Development: RE: U-Boot Network Setup (MitySOM-5CSX-H6-42A)
- Hi Jose,
Are you using a MitySOM-5CSX Development kit board, or a custom carrier board?
The first couple of lines: - Hello,
I was trying to load the kernel and fpga files through a TFTP server. I have to use a static IP for this as a requirement (cant use dhcp).
Is there any setup I have to do besides establishing environment variables on U-boot? I c...