|
1
|
SD Card setup to boot WEC7
|
|
2
|
|
|
3
|
|
|
4
|
Required Tools:
|
|
5
|
TI_SDCard_boot_utility_v1_0.exe which is located in the tools folder within the downloaded package.
|
|
6
|
|
|
7
|
Using TI SDCard Boot Utility:
|
|
8
|
|
|
9
|
1) Run the utility, and select the SD card drive. If you?re using Windows Vista or Windows Seven, you should run the utility in administrator mode.
|
|
10
|
2) In the ?second step? application area (MLO File), browse and Select the MLO file located in image folder.
|
|
11
|
3) In the ?third step? application area (OS Files), browse and Select the EBOOTSD.NB0 and NK.bin files (use ctrl key for multi selection).
|
|
12
|
4) Click Proceed.
|
|
13
|
5) Click "Start" to format the SD card
|
|
14
|
6) Click "OK" for Format Warning
|
|
15
|
7) Click "OK" once "Format Complete" window pops up
|
|
16
|
8) Click "Close" to close the format window
|
|
17
|
9) Click "Quit" once the files are copied
|
|
18
|
|
|
19
|
10) Insert the SD Card into the SD Card slot.
|
|
20
|
11) Connect a NULL modem serial cable to the J507 DB9 connector and to your computer.
|
|
21
|
12) Open a HyperTerminal (or TeraTerm) connection to the COM port connected to the device.
|
|
22
|
13) Set the port's settings to a baud of 115200 with no flow control, no parity and 8 bits.
|
|
23
|
14) Turn on the board.
|
|
24
|
15) In the Teraterm window, press space when it asks to break into the bootloader menu.
|
|
25
|
16) Press [2] to enter the boot device menu.
|
|
26
|
17) Press [1] to boot from SD card.
|
|
27
|
18) Press [4] to enter the network menu.
|
|
28
|
19) Press [2] and disable KITL if it isn't already.
|
|
29
|
20) Press [9] and enable OAL messages if they aren't already.
|
|
30
|
21) Press [7] and save these settings.
|
|
31
|
22) Press [0] or reboot the board, connect the HDMI/DVI cable to a supported display.
|
