Forums » Software Development »
Official u-boot with higher baud rate options
Added by Noman Siddiqui over 13 years ago
Hi,
I would like to get the following change in the next official uboot release. This would allow the use to change the baudrate at the u-Boot and transfer the images at higher baud rate, once the image transfer is complete the baudrate could be changed back to default 115200. Default baudrate in u-boot and in the environment settings could still be kept at 115200.
mitydsp@mitydsp-dev:~/projects/u-boot-mitydspl138$ diff ../u-boot-mitydspl138.orig/include/configs/mityomapl138.h include/configs/mityomapl138.h
74c74
< #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
---
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
Thanks,
Noman
Replies (1)
RE: Official u-boot with higher baud rate options - Added by Michael Williamson over 13 years ago
Hi Noman,
I don't see any reason not to support this, but it may take some time for this change to propagate to our factory images/procedures. we'll need to test it here as well, but we'll try to roll it in. Thanks for the feedback.
-Mike
