Forums » Software Development »
MMC mount in Nand Boot
Added by Manjunath K S about 4 years ago
Hi,
we have flashed u-boot and kernel to Nand and trying Nand boot of the kernel, after kernel boots up,
When we insert SD card(MMC) , it is not mounting. What could be the problem in rootfs or kernel.
Hardware+
We are using the “MitySOM-335x Processor Card” in our target board. On the processor card with we have AM3359 mounted. We have Micrel KSZ9021 Phy connected to external interface as per “MitySOM_Ethernet_Interface.xlsx”
Development environment:+
We are using TI SDK 05.03.00 for building u-boot and Kernel.
Please help us.
Regards,
Manjunath
Replies (4)
RE: MMC mount in Nand Boot - Added by Jonathan Cormier about 4 years ago
Does the same u-boot and kernel behave the same using our devkit? Can you attach a full boot log showing the problem?
RE: MMC mount in Nand Boot - Added by Manjunath K S about 4 years ago
Hi ,
We don't have your devkit to test on.
I cant explain in log as there is no log telling mounted or unmounted.
Regards,
Manjunath
RE: MMC mount in Nand Boot - Added by Jonathan Cormier about 4 years ago
Is your hardware using the same mmc port as the devkit? If so then no changes to the software should be needed unless your using a microsd without card detect. If there is no card detect pin, you need to disable the pin in u-boot/kernel.
RE: MMC mount in Nand Boot - Added by Manjunath K S about 4 years ago
Hi ,
Yes it is using same mmc port ,Thank you for your suggestions , we were able resolve the issue .
Regards,
Manjunath
