Activity
From 01/06/2014 to 02/04/2014
02/03/2014
- Posting on behalf of a customer:...
01/30/2014
- 10:01 AM FPGA Development: RE: Ethernet
- Edited my response. Good eye Dave. Thanks!
- 09:31 AM FPGA Development: RE: Ethernet
- Greg,
Only 2 "e"s in setenv, not three... Jack probably knows that, but just to be clear...
Dave
- 09:10 AM FPGA Development: RE: Ethernet
- Hi Jack,
Follow these steps to correct the ethernet:
1. Break into u-boot by resetting the system and hitting ...
01/29/2014
- 06:48 PM FPGA Development: RE: Ethernet Rev B
- Hi,
I just received your rev B module. We noticed that the ethernet doesn't work on this revision at all. Is there...
01/27/2014
- 12:56 PM FPGA Development: RE: Load FPGA Timeout Error
- Hi Jack,
I'm not sure what else to try other than trying to program the FPGA through a JTAG pod, which I believe y...
01/24/2014
- 01:57 PM FPGA Development: RE: Load FPGA Timeout Error
- Hi Dan,
I did what Adam suggested and it made no difference. I tried it without anything plugged in and still noth... - 01:21 PM FPGA Development: RE: Load FPGA Timeout Error
- Currently I do not believe that is the case, seeing as this problem is happening in both uboot and linux.
Have you... - 12:28 PM FPGA Development: RE: Load FPGA Timeout Error
- Could this be a OS issue that's causing it?
Can some one direct me the exact link where I can download the img fil...
01/22/2014
- 03:37 PM FPGA Development: RE: Load FPGA Timeout Error
- Your MSEL is currently 00000. Try changing S100-position3 to OFF to get an MSEL[4:0] of 00100. This will change the ...
- 03:11 PM FPGA Development: RE: Load FPGA Timeout Error
- Looking through the uboot source code it seems that the HPS is not able to set the FPGA into a reset mode. Which coul...
- 02:57 PM FPGA Development: RE: Load FPGA Timeout Error
- correct
- 02:56 PM FPGA Development: RE: Load FPGA Timeout Error
- Is the following the full error you received?...
- 02:34 PM FPGA Development: RE: Load FPGA Timeout Error
- Yes
- 02:33 PM FPGA Development: RE: Load FPGA Timeout Error
- was this from the **run fpgaload**?
- 02:31 PM FPGA Development: RE: Load FPGA Timeout Error
- Hi Dan,
I got an error: Failed with error code -1.
Jack - 02:29 PM FPGA Development: RE: Load FPGA Timeout Error
- Hi Jack,
This needs to be run during uboot, which you get to by pressing any key during the first 5 seconds of sta... - 02:13 PM FPGA Development: RE: Load FPGA Timeout Error
- Hi Dan,
The Linux OS on the board doesn't have run and saveenv. I tried to update it, but it doesn't have the apt-... - 01:33 PM FPGA Development: RE: Load FPGA Timeout Error
- ...
- 12:59 PM FPGA Development: RE: Load FPGA Timeout Error
- Hi Dan,
Regarding the uboot procedure, I have never worked with uboot before and the instructions on rocketboard i... - 12:33 PM FPGA Development: RE: Load FPGA Timeout Error
- Hi Adam,
I'm not sure what the default positions for the MSEL or which of the switches on board are for the MSEL. ... - 12:23 PM FPGA Development: RE: Load FPGA Timeout Error
- Hi Jack,
Please check the MSEL dip switches. These should be set to FPPx16 or FPPx32 for the FPGA Manager to be a... - 12:07 PM FPGA Development: RE: Load FPGA Timeout Error
- Hi Dan,
The same issue still occurs after power cycling.
I'm wondering if it's a hardware issue.
Jack - 10:43 AM FPGA Development: RE: Load FPGA Timeout Error
- Hi Jack,
We have not seen this issue yet. If you power cycle the board did this issue still occur?
Dan
01/20/2014
- Hi,
I just got back from vacation and tried to run my board and ran into a problem.
I tried to load rbf file as...
01/09/2014
- 08:50 AM FPGA Development: RE: I/O voltage
- Thanks, very useful info. Will give it a try over the next couple of weeks.
Nigel.
01/08/2014
- 04:57 PM FPGA Development: RE: I/O voltage
- Hi Nigel,
Below you will find the details to support additional IO standards. I believe this covers all the neces... - 01:53 PM FPGA Development: RE: I/O voltage
- Any update on whether the dev kit can be configured for 3.3v I/O?
Thanks,
Nigel.
Also available in: Atom
Go to top