Activity
From 04/09/2015 to 05/08/2015
04/30/2015
- 07:53 AM Software Development: RE: Bare-metal interrupt handling working only in debugger
- Hi Alex,
Glad you solved your issue, sorry we didn't provide much help. We don't have a lot of folks trying to do... - 06:22 AM Software Development: RE: Bare-metal interrupt handling working only in debugger
- No, that was obviously not the reason. The unhosted and hosted linker scripts do link against different libraries but...
04/28/2015
- 03:50 PM Software Development: RE: Bare-metal interrupt handling working only in debugger
- I am now thinking that I might have to use the unhosted version of the linker script (even though it worked just fine...
- 02:36 PM Software Development: RE: Bare-metal interrupt handling working only in debugger
- Hi Mike,
That address is indeed the base of the interrupt table. I have been using it without any problem with oth... - 11:20 AM Software Development: RE: Bare-metal interrupt handling working only in debugger
- I personally haven't tried to do this before, but isn't address 0x30000000 the base of your interrupt vector table? ...
- Hello,
I am using the MitySOM Dev Kit and I want to use interrupts in a bare-metal
application. To that effect I...
04/16/2015
- 05:20 PM PCB Development: RE: SoM pinout verification
- Thanks Adam. I'd been floating through the wiki and referencing the design guide heavily as well.
Follow up on th... - 03:22 PM Software Development: RE: Ethernet Error When Upgrading to Linux 3.16.
- So I believe I solved my own problem. I compiled the kernel and then just dropped it into my sd card. When
I update...
04/15/2015
- 12:32 PM PCB Development: RE: SoM pinout verification
- Thank you for the info - we will correct the details.
Your assumption is correct. Additional design guidelines ca... - Parsing the datasheet prior to establishing a carrier board design, I observed the following flaw:
The table on pg...
04/10/2015
- After successfully building my development system with Yocto, I find that the ethernet and GPIO no longer work
as c... - 11:30 AM Software Development: RE: Created SD card for the MitySom-5CSX development board not booting correctly
- I am using the provided VM. I only work on the firmware but I will get our hardware engineer to generate the handover...
- 11:14 AM Software Development: RE: Created SD card for the MitySom-5CSX development board not booting correctly
- Hi Ian,
Critical Link has a project made specifically for our development kit, it can be downloaded from our git s... - 11:04 AM Software Development: RE: Created SD card for the MitySom-5CSX development board not booting correctly
- Hi Dan,
No changes were made to an example project located in altera/14.0/embedded/examples/hardware/cv_soc_devki... - 10:02 AM Software Development: RE: Created SD card for the MitySom-5CSX development board not booting correctly
- Hi Ian,
I noticed 2 things when looking through the logs, it looks like the ethernet MAC can't find the phy and th... - Hi,
I am using the MitysSOM-5CSX Altera Cyclone V development board booting from SD card. I have built the kernel, f... - All,
We just started a new project running on uC/OS-II. We selected MitySOM-5CSx Development Kit but most documents...
04/09/2015
- 09:26 AM FPGA Development: RE: Example project
- Hi Malcom.
I will check on the memory init files issue. I seem to recall that those can be ignored, but I don't... - I've just started to evaluate the MitySOM-5CSX board and the first thing I did was install VirtualBox and the supplie...
Also available in: Atom
Go to top