Project

General

Profile

Activity

From 05/31/2023 to 06/29/2023

06/23/2023

08:07 PM PCB Development: RE: Unconnected pins, board dimensions and hole positions
Hello.
1. Generally speaking, all of the MFIO pins are direct connects to the AM57xx CPU device and if they are un...
Michael Williamson
06:51 PM PCB Development: Unconnected pins, board dimensions and hole positions

Posting on behalf of customer:
1.The J1 and J3 connectors of MitySOM-AM57 are described as “MFIO” for “Type”.
...
Thomas Catalino

06/14/2023

02:46 PM PCB Development: RE: Design support for USB for use with AM57x SOM
Datasheet has been released Jonathan Cormier

06/09/2023

04:53 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
Hi,
For testing IEEE 1588 H/W time stamp application, we included DP83640 in our circuit. Since DP83640 doesn't ha...
Sandeep Sivadas

06/07/2023

01:47 PM PCB Development: RE: eMMC support for MitySOM AM572x

Per this e2e post, it should be okay to use 1.8V signal levels with an eMMC.
https://e2e.ti.com/support/processors...
Jonathan Cormier
07:25 AM PCB Development: RE: eMMC support for MitySOM AM572x
Hi Jonathan,
We designed an eMMC circuit using *MTFC16GAPALBH-AIT*. As per the data sheet of MitySOM MMC2 signals ...
Sandeep Sivadas

06/06/2023

07:06 PM PCB Development: RE: Design support for USB for use with AM57x SOM
The USB2_DM/DP supports 5V voltage level. Datasheet will be updated on next release. Jonathan Cormier
02:11 PM PCB Development: RE: Design support for USB for use with AM57x SOM
Thanks, I'll look into it. I'm pretty sure that's incorrect. Jonathan Cormier
05:49 AM PCB Development: RE: Design support for USB for use with AM57x SOM
Hi Jonathan,
*1. For USB2, it is mentioned that voltage level is 1.8V. We need to connect these signals to U...
Sandeep Sivadas

06/05/2023

09:31 PM PCB Development: RE: Design support for USB for use with AM57x SOM
Schematic review:
* Both schematics are using VUSB_VBUS1 as a net name. One of them is probably supposed to be VUSB...
Jonathan Cormier
04:19 PM PCB Development: Design support for USB for use with AM57x SOM
Hi,
We need to integrate one USB 3.0, one USB 2.0 and one Debug USB with our application system.
1. For USB2, ...
Sandeep Sivadas

06/02/2023

03:31 PM Software Development: RE: USB touch screen support for AM572x development board
Note you can update the command line args for the HelloWorld example to work without weston as well.
!clipboard-20...
Jonathan Cormier
03:29 PM Software Development: RE: USB touch screen support for AM572x development board
Sandeep Sivadas wrote in message#6366:
> Hi Jonathan,
>
> We tried the evtest and weston commands. But the matri...
Jonathan Cormier
05:47 AM Software Development: RE: USB touch screen support for AM572x development board
Hi Jonathan,
We tried the evtest and weston commands. But the matrix GUI application is not responding to USB touc...
Sandeep Sivadas
02:51 PM Software Development: RE: Support for Qt creator application for MitySOM AM57x
Sandeep Sivadas wrote in message#6367:
> Hi Jonathan
>
>
> We followed the guidelines as per the link https://...
Jonathan Cormier
09:58 AM Software Development: RE: Support for Qt creator application for MitySOM AM57x
Hi Jonathan
We followed the guidelines as per the link https://support.criticallink.com/redmine/projects/mitysom...
Sandeep Sivadas

05/31/2023

02:25 PM Software Development: RE: USB touch screen support for AM572x development board
> hid-generic 0003:0461:0022.0003: input: USB HID v1.00 Device
Okay good news, looks like the HID driver is getting ...
Jonathan Cormier
05:44 AM Software Development: RE: USB touch screen support for AM572x development board
Hi Jonathan,
Thank you for your support.
When i connected the Newhaven Display's USB with the AM572x Developmen...
Sandeep Sivadas
12:08 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
Hi Michael,
We are planned to do our ethernet design with IEEE 1588 PTP hardware support with RJ45 and Fibre commu...
Sandeep Sivadas
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)