Mity CPU Platforms » MitySOM-AM57X

06/23/2023

08:07 PM PCB Development: RE: Unconnected pins, board dimensions and hole positions

Hello.
1. Generally speaking, all of the MFIO pins are direct connects to the AM57xx CPU device and if they are un... Michael Williamson

06:51 PM PCB Development: Unconnected pins, board dimensions and hole positions

Posting on behalf of customer:
1.The J1 and J3 connectors of MitySOM-AM57 are described as “MFIO” for “Type”.
... Thomas Catalino

06/14/2023

02:46 PM PCB Development: RE: Design support for USB for use with AM57x SOM

Datasheet has been released Jonathan Cormier

06/09/2023

04:53 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM

Hi,
For testing IEEE 1588 H/W time stamp application, we included DP83640 in our circuit. Since DP83640 doesn't ha... Sandeep Sivadas

06/07/2023

01:47 PM PCB Development: RE: eMMC support for MitySOM AM572x

Per this e2e post, it should be okay to use 1.8V signal levels with an eMMC.
https://e2e.ti.com/support/processors... Jonathan Cormier

07:25 AM PCB Development: RE: eMMC support for MitySOM AM572x

Hi Jonathan,
We designed an eMMC circuit using *MTFC16GAPALBH-AIT*. As per the data sheet of MitySOM MMC2 signals ... Sandeep Sivadas

06/06/2023

07:06 PM PCB Development: RE: Design support for USB for use with AM57x SOM

The USB2_DM/DP supports 5V voltage level. Datasheet will be updated on next release. Jonathan Cormier

02:11 PM PCB Development: RE: Design support for USB for use with AM57x SOM

Thanks, I'll look into it. I'm pretty sure that's incorrect. Jonathan Cormier

05:49 AM PCB Development: RE: Design support for USB for use with AM57x SOM

Hi Jonathan,
*1. For USB2, it is mentioned that voltage level is 1.8V. We need to connect these signals to U... Sandeep Sivadas

06/05/2023

09:31 PM PCB Development: RE: Design support for USB for use with AM57x SOM

Schematic review:
* Both schematics are using VUSB_VBUS1 as a net name. One of them is probably supposed to be VUSB... Jonathan Cormier

04:19 PM PCB Development: Design support for USB for use with AM57x SOM

Hi,
We need to integrate one USB 3.0, one USB 2.0 and one Debug USB with our application system.
1. For USB2, ... Sandeep Sivadas

06/02/2023

03:31 PM Software Development: RE: USB touch screen support for AM572x development board

Note you can update the command line args for the HelloWorld example to work without weston as well.
!clipboard-20... Jonathan Cormier

03:29 PM Software Development: RE: USB touch screen support for AM572x development board

Sandeep Sivadas wrote in message#6366:
> Hi Jonathan,
>
> We tried the evtest and weston commands. But the matri... Jonathan Cormier

05:47 AM Software Development: RE: USB touch screen support for AM572x development board

Hi Jonathan,
We tried the evtest and weston commands. But the matrix GUI application is not responding to USB touc... Sandeep Sivadas

02:51 PM Software Development: RE: Support for Qt creator application for MitySOM AM57x

Sandeep Sivadas wrote in message#6367:
> Hi Jonathan
>
>
> We followed the guidelines as per the link https://... Jonathan Cormier

09:58 AM Software Development: RE: Support for Qt creator application for MitySOM AM57x

Hi Jonathan
We followed the guidelines as per the link https://support.criticallink.com/redmine/projects/mitysom... Sandeep Sivadas