Activity
From 06/03/2023 to 07/02/2023
06/23/2023
- 08:07 PM PCB Development: RE: Unconnected pins, board dimensions and hole positions
- Hello.
1. Generally speaking, all of the MFIO pins are direct connects to the AM57xx CPU device and if they are un...
Posting on behalf of customer:
1.The J1 and J3 connectors of MitySOM-AM57 are described as “MFIO” for “Type”.
...
06/14/2023
- 02:46 PM PCB Development: RE: Design support for USB for use with AM57x SOM
- Datasheet has been released
06/09/2023
- 04:53 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
- Hi,
For testing IEEE 1588 H/W time stamp application, we included DP83640 in our circuit. Since DP83640 doesn't ha...
06/07/2023
- 01:47 PM PCB Development: RE: eMMC support for MitySOM AM572x
Per this e2e post, it should be okay to use 1.8V signal levels with an eMMC.
https://e2e.ti.com/support/processors...- 07:25 AM PCB Development: RE: eMMC support for MitySOM AM572x
- Hi Jonathan,
We designed an eMMC circuit using *MTFC16GAPALBH-AIT*. As per the data sheet of MitySOM MMC2 signals ...
06/06/2023
- 07:06 PM PCB Development: RE: Design support for USB for use with AM57x SOM
- The USB2_DM/DP supports 5V voltage level. Datasheet will be updated on next release.
- 02:11 PM PCB Development: RE: Design support for USB for use with AM57x SOM
- Thanks, I'll look into it. I'm pretty sure that's incorrect.
- 05:49 AM PCB Development: RE: Design support for USB for use with AM57x SOM
- Hi Jonathan,
*1. For USB2, it is mentioned that voltage level is 1.8V. We need to connect these signals to U...
06/05/2023
- 09:31 PM PCB Development: RE: Design support for USB for use with AM57x SOM
- Schematic review:
* Both schematics are using VUSB_VBUS1 as a net name. One of them is probably supposed to be VUSB... - Hi,
We need to integrate one USB 3.0, one USB 2.0 and one Debug USB with our application system.
1. For USB2, ...
Also available in: Atom
Go to top