Activity
From 10/22/2023 to 11/20/2023
11/20/2023
- 06:30 PM PCB Development: RE: Pin connection
- Hello Mohammad,
Please take a look at our development board schematic, if you haven't already. It can be found her...
11/17/2023
- 07:38 PM PCB Development: RE: Pin connection
- Thanks for your reply, Mike. I used Y13 as the clock pin in the development board and I wonder where internally in th...
- 07:30 PM PCB Development: RE: Pin connection
- Hi Mohammad,
If you open up the Datasheet and check Table 8 and search for Y13 you should that it is a direct conn... - Hello,
I have a development kit of MitySOM-5csx (https://www.criticallink.com/product/mitysom-5csx-dev-kit/). I w...
11/16/2023
- 06:18 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: Barrel jack type
- Marko,
The manufacturer part number used for the barrel jack is PJ-059BH. I have attached the manufacturer datashe... - Hello,
I was wondering if you could help me find information on the specifications for the barrel plug, we need t... - Hello,
We have this module (https://www.criticallink.com/product/mitysom-5csx/ ) board on our project board and al...
11/02/2023
- 02:35 AM PCB Development: RE: MSEL[4] and return current cap...
- Sorry if I wasn't clear. The caps are optional. They might help in a worst case situation, but for most designs the...
11/01/2023
- 11:34 PM PCB Development: RE: MSEL[4] and return current cap...
- Hi David,
I understand that, but the eval board only has them on MSEL[3:0] and does not have one on MSEL[4]. So, ... - 07:38 PM PCB Development: RE: MSEL[4] and return current cap...
- The intention of the caps to ground on these signals is to allow some high frequency ground currents from the SOM I/O...
10/28/2023
- The dev board has MSEL[3:0] with 1000pF caps, and MSEL[4] does not have a cap, unless I missed it. In the design gui...
10/27/2023
- 06:10 PM FPGA Development: RE: Link missing on System Design Overview wiki page
- Thank you for bringing this to our attention, I've updated the text on that wiki page so it now links to our referenc...
10/26/2023
- 08:00 PM Software Development: RE: How to boot FPGA from U-Boot without having the uboot.env file in my SD card
- Hi everyone,
For anyone who is reading, I have figured it out and I hope this will help you.
The U-Boot is runnin... - (posted on behalf of a customer)
on this URL:
https://support.criticallink.com/redmine/projects/mityarm-5cs/wik...
10/25/2023
- 06:54 PM PCB Development: RE: Standoff on Mounting Hole Locations page
- Part number 91115A501 is a 3/8" size standoff (1/8" tall, 4-40, hex). The one on the deb board I have is 1/4" size, ...
Also available in: Atom
Go to top