Project

General

Profile

Activity

From 10/25/2023 to 11/23/2023

11/21/2023

04:59 PM PCB Development: RE: Pin connection
Hello Dan,
Thanks for providing this information and support. According to this datasheet, the FPGA module has an...
Mohammad Hassan Adeli

11/20/2023

06:30 PM PCB Development: RE: Pin connection
Hello Mohammad,
Please take a look at our development board schematic, if you haven't already. It can be found her...
Daniel Vincelette

11/17/2023

07:38 PM PCB Development: RE: Pin connection
Thanks for your reply, Mike. I used Y13 as the clock pin in the development board and I wonder where internally in th... Mohammad Hassan Adeli
07:30 PM PCB Development: RE: Pin connection
Hi Mohammad,
If you open up the Datasheet and check Table 8 and search for Y13 you should that it is a direct conn...
Michael Williamson
07:08 PM PCB Development: Pin connection
Hello,
I have a development kit of MitySOM-5csx (https://www.criticallink.com/product/mitysom-5csx-dev-kit/). I w...
Mohammad Hassan Adeli

11/16/2023

06:18 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: Barrel jack type
Marko,
The manufacturer part number used for the barrel jack is PJ-059BH. I have attached the manufacturer datashe...
Alexander Block
07:28 AM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: Barrel jack type
Hello,
I was wondering if you could help me find information on the specifications for the barrel plug, we need t...
Marko Mamić
03:02 PM FPGA Development: Clock frequency pins
Hello,
We have this module (https://www.criticallink.com/product/mitysom-5csx/ ) board on our project board and al...
Mohammad Hassan Adeli

11/02/2023

02:35 AM PCB Development: RE: MSEL[4] and return current cap...
Sorry if I wasn't clear. The caps are optional. They might help in a worst case situation, but for most designs the... David Rice

11/01/2023

11:34 PM PCB Development: RE: MSEL[4] and return current cap...
Hi David,
I understand that, but the eval board only has them on MSEL[3:0] and does not have one on MSEL[4].  So, ...
Austin Franklin
07:38 PM PCB Development: RE: MSEL[4] and return current cap...
The intention of the caps to ground on these signals is to allow some high frequency ground currents from the SOM I/O... David Rice

10/28/2023

06:54 PM PCB Development: MSEL[4] and return current cap...
The dev board has MSEL[3:0] with 1000pF caps, and MSEL[4] does not have a cap, unless I missed it. In the design gui... Austin Franklin

10/27/2023

06:10 PM FPGA Development: RE: Link missing on System Design Overview wiki page
Thank you for bringing this to our attention, I've updated the text on that wiki page so it now links to our referenc... Daniel Vincelette

10/26/2023

08:00 PM Software Development: RE: How to boot FPGA from U-Boot without having the uboot.env file in my SD card
Hi everyone,
For anyone who is reading, I have figured it out and I hope this will help you.
The U-Boot is runnin...
Shahad Alrawi
02:24 AM FPGA Development: Link missing on System Design Overview wiki page
(posted on behalf of a customer)
on this URL:
https://support.criticallink.com/redmine/projects/mityarm-5cs/wik...
Thomas Catalino

10/25/2023

06:54 PM PCB Development: RE: Standoff on Mounting Hole Locations page
Part number 91115A501 is a 3/8" size standoff (1/8" tall, 4-40, hex). The one on the deb board I have is 1/4" size, ... Austin Franklin
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)