Activity
From 03/23/2014 to 04/21/2014
04/21/2014
- 03:19 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Booting from Nand
- Bindu,
The datasheet says the part is 4Gb which divided by 8 is 512MB. We don't have any parts that carry a nand ... - 02:50 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Booting from Nand
- Jonathan, thank you for all the information. We put his task on the back burner for a while -- but it works perfectly...
04/17/2014
- 03:52 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Not able to update opkg on MityDSP-L138
- The mityomapl138 404s are expected. We unfortunately don't have our own packages in their feed.
- 03:16 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Not able to update opkg on MityDSP-L138
- Thank you for quick response! Mainly the updating process went successfully,but we had a couple of 404 errors (see sc...
04/16/2014
- 01:53 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Problem adding a package to LucidLynx Ubuntu Image
- Ahh. Have you run @sudo apt-get update@?
You can remove the cd from the software sources by opening the software ... - 01:35 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Problem adding a package to LucidLynx Ubuntu Image
- Hi Jonathan,
I didn't intentionally want to upgrade from the cd, but the system seems to be insistent on looking for... - 01:27 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Problem adding a package to LucidLynx Ubuntu Image
- This might help:
http://askubuntu.com/questions/129942/installing-packages-from-ubuntu-cd
I haven't personally tr... - I've been trying to install doxygen into my Ubuntu image using the package manager
and it keeps giving me this erro... - 12:14 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Enabling I2C1 on the OMAP-L138F
- This was indeed useful for getting the bus enabled. Thanks!
04/15/2014
- 07:49 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Enabling I2C1 on the OMAP-L138F
- Thanks Jonathan, we'll look into this.
04/14/2014
- 01:06 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Enabling I2C1 on the OMAP-L138F
- Looks like the baseboard-recon.c file enables i2c1. See if this helps. Search for references to i2c1.
http://supp... - Hi, we are attempting to use the I2C1 bus for communicating with some external devices. We made some additions to 'bo...
04/12/2014
- 02:43 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Broken i_ema_a<8>
- Lukasz,
I have found the RMA request e-mail you have mentioned and have replied to that e-mail accordingly.
Tha... - 12:58 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Broken i_ema_a<8>
- I have more questions about RMA procedure.
The company send an e-mail to orders@criticallink.com with a question a...
04/11/2014
- 06:51 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Not able to update opkg on MityDSP-L138
- Hello Nick,
Please try replacing the URLs in the configuration files located in /etc/opkg/ to use feeds.angstrom-d... - 03:52 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Not able to update opkg on MityDSP-L138
- Sorry for the delay.
We are confirming the status of the Angstrom OPKG feeds and are working on providing guidanc... - 04:27 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Error while connecting to ARM9
- The issue of debugging the ARM is that you cannot use CCS JTAG / the emulator when the Linux OS's memory manager is r...
- 03:47 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: MityDSP-L138 CCS 5.5 XDS510
- Update after phone call with customer:
1) Created a new project that was able to run a "Hello World" sample applic... - 11:52 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to add ifplugd to Busybox
- Mary, it should be exit 0 at the end of the script, as that indicates successful completion, so the fix you made is O...
- 10:57 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to add ifplugd to Busybox
- I added the -sn options in the ifplugd.conf to see debugging messages and found that ifplugd was exiting due to a non...
- 09:46 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: How to add ifplugd to Busybox
- Sorry about the delay ... other problems to work on, but I finally got back to this.
I copied the files from your ...
04/10/2014
- 12:19 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSPLink library sources
- Thank you very much. That will do
Best regards - 12:01 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSPLink library sources
- All the dsplink source code should be in the 3rdparty folder of the BSP/MDK.
-Mike
- Hello,
I have a question. Is there any way I could access the source code of DSPLink libraries on DSP side ? Are the...
04/09/2014
- 06:31 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP- EDMA Transmission problem
- Hello again,
Thank you very much for help. For the time being it looks like I will be able to make do with the tcDs... - I am not able to update opkg on MityDSP due to 404 error on angstrom-distribution.org. Where can I get the update?
- Hi, I am working with the MityDSP-L138-FI-236-RL target and could use some help to get our XDS510 debugger configured...
- 06:30 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: spi1 usage in a custom board
- Hello,
Yes, for the 3.2 kernel provided, you need to create (or modify) a baseboard file as you have suggested. I... - 04:09 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: spi1 usage in a custom board
- Maybe I was not clear...
I do not want to modify uboot. It works good for me as it is.
I would like to configur...
04/08/2014
- 01:01 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: spi1 usage in a custom board
- If they only need to be configured on bootup it might be easier to do it from u-boot. You could try enabling the spi...
- Hi everybody.
I am a newby in Linux development. I have my custom board based on MityDSP138F with two ICs attached...
04/07/2014
- 12:00 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Net: No ETH PHY detected!!!
- I used the serial flashing program to erase the memory before flashing u-boot again and this time phy eth is detected...
- Hello,
I have a mitydspl138 board. I accidentally overwrote some of the u-boot memory. I used the serial programme... - 07:43 AM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: UPP Sample Code needed
- For the FPGA interface, you could take a look at the "Vision Framework Design FIles":https://support.criticallink.com...
- 07:39 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP- EDMA Transmission problem
- Hello Mr. Krawczyk,
You can interface with the UPP directly as you have described and by looking through the TRM, ...
04/03/2014
- 09:35 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP- EDMA Transmission problem
- Hello Mike,
The UPP seems to be an optimal solution. However, It looks like configuring the UPP is a bit complex. I ... - Hi everyone,
I need a sample FPGA code for UPP(Supported by Critical Link) with it's UCF file(including timing const...
04/01/2014
- 05:23 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP- EDMA Transmission problem
- Actually,
I was going to suggest transferring to IRAM, or if you need to transfer to DDR, doing a chained transfer... - 04:53 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP- EDMA Transmission problem
- To be more precise,
Is there any way to change the EDMA3 configuration to reduce transfer time ? I want to transfer ...
03/31/2014
- 05:20 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP- EDMA Transmission problem
- Hello again,
I am writing because I have the following problem:
I succesfully transfer the data, but the transfer t...
03/26/2014
- 05:33 PM MitySOM-5CSX Altera Cyclone V Software Development: RE: Interrupt & Device Tree
- I tried to generate the device tree file from the sopcinfo file produced by quartus.
I used the following command
... - Hi,
Do you guys have any example on how to handle a interrupt? I have it set up in Qsys, where I have a FIFO sendi... - 03:16 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP- EDMA Transmission problem
- Solved !
You can use the IRAM section. It is disabled as cache in the current configuration .tcf file.
Best regards
03/24/2014
- 05:31 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Encrypted root filesystem experience
- Don,
You'll need to create a custom workorder as those tools aren't built into the demo filesystem they provide. ... - 05:26 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Encrypted root filesystem experience
- Thanks for looking into that for me. In looking at the build summary for the timesys mityarm sdk I didn't see the lvm...
- 04:42 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Encrypted root filesystem experience
- Don,
I was able to verify that they have the cryptsetup package which contains dm-crypt and luks tools.
- 03:44 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Encrypted root filesystem experience
- Timesys has a build system that builds the entire filesystem from source. The only thing we provide them is a workin...
- 03:02 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Encrypted root filesystem experience
- Thanks Jonathan I will check out the timesys SDK some more. I should add that there is significant investment of tim...
- 10:14 AM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Encrypted root filesystem experience
- Don,
I'm not aware that anyone here has tried to get encrypted filesystems working, if you find any good resources... - I'm working with a MityArm-335x SOM and attempting to set up an encrypted root file system on an SD card to be mounte...
- 09:57 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GEL-file for MityDSP-L138F
- Yes. By default, the core should be 1.2V on power up.
-Mike
- Hi,
that gel-file need to use for mitydsp-L138F with 1.2 V Core?
Thanks
03/23/2014
- 08:05 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Manage LX16 and LX45 at runtime
- Thanks a lot Mike!
As usual, your support is impressive!
Ticket close.
-François - 05:18 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Manage LX16 and LX45 at runtime
- The model number for the part should be readable in the factory configuration information in the I2C prom. The model...
- We have a product based on MityDSP-L138F using either LX16 and LX45 fpga cores.
Q1) Can we detect which FPGA core ...
Also available in: Atom
Go to top
