Repositories and Pre-built Images¶

This page has details and links to pre-built images below.

Please refer to Building and Customizing qcom-multimedia-image with Yocto for details on building from source.

Pre-built Images¶

BSP Release 1.0¶

Initial release of qcom-multimedia-image with support for:

• DisplayPort
• MIPI Camera Waveshare OV9281-120 Mono Camera on CSI0
• GPIO Control of Expansion Header pins
• Wi-Fi Silex SX-PCEAX-M2
• Push Button Events
• PCIe Gen 3 2-lane
• eMMC at HS200
• microSD Card

SDK Toolchain

File System Image

BSP Release 1.1¶

Changes:

• Audio
• UFS Gear 4
• evtest
• Home Push Button
• Add support for all CSI1-CSI4 camera inputs
• USB C DP support on rev4 dev boards
• Remove gpio-reserved-ranges = <48 4>;
  • This was blocking use of QUP_1 SE4 (e.g. uart12/i2c12/spi12)
• Expanded number of QUP UARTs that can be instantiated
  • Was previously limited to 4
• Add IMAGE_INSTALL to /etc/buildinfo so we know what packages are included
• Added files to re-provision UFS
  • Allows for disabling write booster buffer
  • Allows for changing LUNs to be in pSLC mode

BSP 1.1 Download

• Contains files for re-provisioning UFS
• Contains file for programming CDT
• Contains qcom-multimedia-image files for programming File System
• Contains SDK Toolchain for cross compiling

BSP 1.1 md5sum

BSP Release 1.2¶

Changes:

• DDR will now run at full speed (requires MitySOM-QC rev4 or greater)
• eMMC now functions at HS400 (requires MitySOM-QC rev4 or greater)

BSP 1.2 Download

• Contains files for re-provisioning UFS
• Contains file for programming CDT
• Contains qcom-multimedia-image files for programming File System
• Contains SDK Toolchain for cross compiling

BSP 1.2 md5sum

BSP Release 2.0 (WIP)¶

Changes:

• Support Qualcomm Linux 2.0 (QLI 2.0)
  • Transition from Yocto scarthgap to wrynose
  • Use kas instead of repo