Activity
From 06/04/2013 to 07/03/2013
07/03/2013
- 03:44 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: bad timing of RS485 TXE when using omap-serial driver
- Hello Mihai,
Would you be willing to share your modified send.c code?
-Mike - I've used your nice guidelines describe here: http://support.criticallink.com/redmine/projects/armc8-platforms/wiki/D...
- 03:29 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Tim,
Thanks for testing this. My module PN: *80-000517RC-1B*.
I believe the problem is with the lower MTD NAND ... - 01:34 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Kim,
Due to the long holiday weekend, i'm not sure this will get looked at until atleast Monday.
Also what is t... - 01:32 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- For our 512mb nand, I believe the format command should be @ubiformat /dev/mtd8 -s 1024 -O 4096@ but it doesn't work.
- 01:31 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Testing on a 256MB nand som, I was able to format mtd8 and mount it. {{collapse(See output:)...
- 01:17 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Kim,
I tried to do the ubiformat on a 512MB nand som here and I ran into the same problem. It marked the whole nand ... - 09:36 AM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Hi Tim,
Could someone at Critical Link send me the commands used for creating the ubifs image and writing it to th... - I am switching from TI Evaluation Board to MityARM-335x Development Kit. I am using Ubuntu 12.04 host machine for dev...
- 07:49 AM MityDSP (TI TMS320C6xxx Based Products) FPGA Development: RE: How to use the sdram for FPGA and EMIFA bus in MityDSP-Pro board?
- Hello Mr. Feng,
I am attaching the DDR MIG Test Bench that we originally used to validate the FPGA DDR connection.... - Hello,
Our project needs a large mount of data transfer, so I want to know the assignment of pin for sdram of FPGA a...
07/02/2013
- 08:09 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Kim
I am not super familiar with ubifs, but it seems it can be a bit tricky to master. I know it can be done, as som... - 07:14 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Here some additional information that maybe helpful. After ubiformat the erase blocks are all marked BAD....
- 05:01 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Hi Tim,
I've been following this steps and it looks like the ubi.img is writing to NAND, but I get error 28 (No sp... - 02:53 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Kim
TI has a few pages on this.. check out http://processors.wiki.ti.com/index.php/UBIFS_Support
As long as you pro... - What's the procedure for creating and writing the Linux UBIFS rootfs to the AM3354 512MB NAND? What ECC is used for t...
- 04:18 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Simple example needed
- Yes, I'm looking for an example similar to the Hello World ARM/DSP project...
- 03:32 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Simple example needed
- Is your ARM processor going to run linux?
- I am using the MityDSP L-138F Industrial development board. I am not finding the examples for that board given in th...
- 10:51 AM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Hardware Reset
- On the MityDSP-L138F, RESET_IN pin is fed into a TPS3808G33DBVR reset monitor circuit. It is not connected to the FP...
- 10:06 AM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Hardware Reset
- Hi Mike,
In effect yes. I was wondering if the device/circuit which drives the reset pin of the OMAP processor is ...
07/01/2013
- 07:49 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Hardware Reset
- When there is a power on reset, the FPGA will be re-initialized (the program pin is pulled low) and will require repr...
- Hi There,
Is there a pin on the MityDSP-L138F processor board FPGA which is attached to a
dedicated power-on/har...
06/28/2013
- 01:19 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: mtd->read (...) returned ECC error
- Hi Tim,
since today, the same problems as already mentioned are happening at the moment on my board.
Before I sta...
06/27/2013
- We are moving our design away from the Vitesse ethernet chip (VSC8601) included on the Am3359 dev board to a Texas In...
- 02:10 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: AM3359 Sleep / Power Savings
- We are currently using the 3.1 kernel from the critical link git.
Thanks for the info! - 04:56 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Fail to boot the kernel after running setup.sh in DVSDK 4.03
- Hi Mike & Jonathan,
Really appreciate your help!
The kit could load the kernel now.
-Derek
06/26/2013
- 04:48 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Fail to boot the kernel after running setup.sh in DVSDK 4.03
- Derek,
Where you aware of this wiki page?
http://support.criticallink.com/redmine/projects/arm9-platforms/wiki/Dv... - 07:26 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Fail to boot the kernel after running setup.sh in DVSDK 4.03
- Hi Derek,
The kernel that comes with the DVSDK (uImage-da850-omapl138-evm.bin) will not work with the MityDSP-L138... - 02:19 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Problem building IndustrialIO project build_lcd_rev_c
- I found the solution to the problem. I had to remove the Xilinx device that was in the iMPACT window (left over from...
- 01:57 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Problem building IndustrialIO project build_lcd_rev_c
- OK clearly it's not finding the file (according to the log). Looks like you have spaces in your path to the bit file...
- 01:54 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Problem building IndustrialIO project build_lcd_rev_c
- That does not seem to work. WHen I double click on "Generate File" I get a big red "Generate Failed" box. The word "b...
- 01:31 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Problem building IndustrialIO project build_lcd_rev_c
- Not having the tools up in front of me. I think you can put more than one bit file into a configuration PROM (to sup...
- 01:22 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Problem building IndustrialIO project build_lcd_rev_c
- I built a simple project based on files for GPIO_Test from Conor O in the post "Xilinx design suite 14.2 and MDK_2012...
- 09:02 AM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Problem building IndustrialIO project build_lcd_rev_c
- Hi Steven,
The issue here is that entity description for the i2c component has changed since the Rev A and B boar... - 07:29 AM MityDSP-L138 (ARM9 Based Platforms) PCB Development: RE: Expansion IO mating headers type
- We use "Molex 87759-5050":http://www.mouser.com/ProductDetail/Molex/87759-5050/?qs=%2Fha2pyFadujxwC2WDHBby6OIFIiNwyQw...
- 04:55 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Data Transfer over DSPLink
- Great!
This works :)
Thanks,
Christian
06/25/2013
- 09:30 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Fail to boot the kernel after running setup.sh in DVSDK 4.03
- Hi Jonathan,
Thank you for your reply:)
I'm using the Industrial IO Development Kit with MityDSP-L138F. No ch... - 10:02 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Fail to boot the kernel after running setup.sh in DVSDK 4.03
- Derek,
I'm unclear with what you changed between when it was last working and now.
-Jonathan - 12:56 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Fail to boot the kernel after running setup.sh in DVSDK 4.03
- I have build the kernel with codes in git://support.criticallink.com/home/git/linux-davinci.git
No more output is ... - 04:40 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
- Ok I misunderstood. This might be what your looking for. http://stackoverflow.com/a/180368/780194
-Jonathan - 04:35 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
- It seem the git diif shows me the differences between what I originally cloned from Critical Link and my current chan...
- 04:03 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
- You could try @git diff@
-Jonathan - 03:57 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
- Hey Jonathan,
I've simply modified the files with-in the u-boot-mityarm-335x directory. Would there be
any way to... - 09:57 AM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
- John,
Depending on how you did your changes you should be able to do a _git pull_ and git will update the repo, me... - Following on from a similar question in the forum "Creating FPGA Base-Project - core manager problem" I am trying to ...
- 03:48 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: CPU Clock and FPGA clock interaction
- Based on what you have told me about Linux operating points, I won't be fooling with the CPU frequency. I will find ...
- 02:51 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: CPU Clock and FPGA clock interaction
- Hi Steven,
If you need a specific frequency for your FPGA, I would recommend adding an external Crystal or Oscilla... - 02:59 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: AM3359 Sleep / Power Savings
- What version of the kernel are you running?
This might be of some interest.
http://processors.wiki.ti.com/index.p... - Is there a way to enter a low power state in the AM3359?
I've been attempting different variations on the followin...
06/24/2013
- 10:28 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Fail to boot the kernel after running setup.sh in DVSDK 4.03
- uboot env:
> U-Boot > printenv
> flashuboot=tftp 0xc0700000 mityomap/u-boot-ubl.bin; sf probe 0; sf erase 0x10000... - Hi all, I have just running setup.sh in DVSDK_4.03, and MityDSP-L138F could not boot the kernel now.
Serial port o... - 09:28 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: booting 3359 from NAND only
- I'll add to what Mike said a wee bit.
You can use the mtdparts u-boot command to display (and set) mtdparts in u-boo... - 07:23 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: booting 3359 from NAND only
- Hi Keith,
I don't think the NAND is actually physically partitioned. It's more of a "table" as you say.
The Ke... - 06:32 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: booting 3359 from NAND only
- Hi Tim,
I have just been looking at flashing from the mmc, however, I have managed to confuse myself even more!
Fr... - 06:09 AM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: booting 3359 from NAND only
- Hi Tim,
Thanks for the quick reply. When you say keep the EEC mode consistent between the u-boot and the kernel is t... - 03:10 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Networking requires ifup
- Bingo. Good catch. I didn't look close enough at the comma/space separators.
Thanks for your help!
Joe. - 03:05 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Networking requires ifup
- The big difference between your boot and mine is:
I have... - 02:55 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Networking requires ifup
- The only thing in the boot log that jumps out at me is:...
- 11:38 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Networking requires ifup
- Joe,
Looking at the networking startup script, all it does is run ifup -a to bring the interfaces up. Could you t... - Starting a new post for this question.
When the MityDSP (L138F) boots up, I am unable to connect via SSH. I have ... - 02:15 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
- Tim,
We just ran across this exact problem with our newly purchased 3354 module(we had been using the 3359's). ... - For various reasons I would prefer an FPGA clock of 96 MHz. Am I right in assuming that if I modify the kernel to ge...
- 10:29 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP Helloworld execution error
- commenting out the deletes solved the problem
thanks - 08:57 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP Helloworld execution error
- Vinod,
If you look at the arm_main.cpp file, the application doesn't wait for you to press q. Its currently setup... - hi,
I could successfully compile the arm_main.cpp in eclipse and dsp_main.cpp in ccs. But upon execution the exit ... - 10:21 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Missing Angstrom Packages
- Good to know.
As far as eth0 not coming up some things to look at:
* Make sure that ip=dhcp was passed to kernel... - 09:51 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Missing Angstrom Packages
- Thanks Jonathan -
That worked just fine - I started down that path but didn't get the right combination of package... - 10:09 AM MityDSP (TI TMS320C6xxx Based Products) Software Development: RE: MityDSP Pro development kit boot anormally
- Hi Mike, thanks again for your reply.
I tried to regulate the RECONFIG_CLOCKS() to recover the board but the core h... - 08:12 AM MityDSP (TI TMS320C6xxx Based Products) Software Development: RE: MityDSP Pro development kit boot anormally
- The problem you are having is that the FPGA logic is using the EMIFA clock with a PLL as the main logic clock within ...
- Hello,
I am using the MityDSP-Pro development kit. Recentlly I find the board behaviors strangely.
I was debuggin... - 10:05 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP Hello World error message
- Thanks for your help
- 09:02 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP Hello World error message
- Nick,
I've just updated the wiki page with a new arm_main.cpp and cleaned up some of the instructions. The error ... - 09:02 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Warning messages when running DSP Hello World
- Nick and François,
I've just updated the wiki page with a new arm_main.cpp and cleaned up some of the instructions... - 07:12 AM MityDSP (TI TMS320C6xxx Based Products) Software Development: RE: How to implement the SetOuput function in the tcDspOutputLatch class for DAC application?
- Hi Michael, thanks for your reply.
I am using the MityDSP-PRO Development Kit with the Critical Link provided extent...
06/23/2013
- The link to "FPGA Core Creation Guidelines" appears to be broken in the Wiki - can anyone point me to the relevant in...
Hi
Wat are recomended type of male headers mating with the Industrial IO Development Kit expansion IO connectors J...
06/21/2013
- 02:49 PM MityDSP (TI TMS320C6xxx Based Products) Software Development: RE: How to implement the SetOuput function in the tcDspOutputLatch class for DAC application?
- The tcDspOutputLatch class is simply an interface class. The tcdspDacTlv5610 class needs to be able to drive the Chi...
- Hello,
I am using the MDK on MityDSP-Pro, the documentation of the on board TLV5610 DAC module says:
??The tcDspDac... - 11:47 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Missing Angstrom Packages
- I was using the latest MDK filesystem but I suspect it will work the same for your version.
-Jonathan - 11:46 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Missing Angstrom Packages
- Joe,
This seems to be a problem with the latests Angstrom repos. I was able to find a forum post related to this.... - Good Morning -
Has anyone had any luck getting "missing" Angstrom packages installed when using the 2012-08-10 MDK... - 07:45 AM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: booting 3359 from NAND only
- Keith
Make sure that the ECC mode is consistent between u-boot (where you are flashing the ubifs) and the kernel. Al... - 12:31 AM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: booting 3359 from NAND only
- The hundreds of "ECC: uncorrectable." messages were due to "nandecc hw 2" line in my environment variables. I discov...
06/20/2013
- Hi,
I have been trying to get my 3359 system up and running from NAND, using a combination of Critical Link and TI i... - Built UDP_echo dbugPro configuration.
usinf spectrum digital XDS510 usb emulator.
cannot connect to the emulator fo... - 03:35 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP Hello World error message
- [Edit] Woops I quoted myself instead of edited.
- 03:35 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP Hello World error message
- Steven,
I just followed the [[DSP_Hello_World]] tutorial and didn't have the same build errors you did. It should... - 11:12 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Data Transfer over DSPLink
- Messages don't have to be strings. You can create message structures (and include headers, for example, that contain...
- Hi,
I was able to run the "DSP Hello World" totorial in the wiki but there i can only transfer messages between bo... - 10:07 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO Output immediately after power on
- Thanks Mike,
the stronger pull downs should be acceptable in my design.
christian
06/19/2013
- 09:16 PM MityDSP (TI TMS320C6xxx Based Products) Software Development: RE: Mitydsp Pro compile and link errors
- How do you set the active configuration to DebugPro?
Krishna - 05:22 PM MityDSP (TI TMS320C6xxx Based Products) Software Development: RE: Mitydsp Pro compile and link errors
- Hi Krishna,
Assuming you are trying to build for the MityDSP Pro, did you set the active configuration to DebugPro... - 05:00 PM MityDSP (TI TMS320C6xxx Based Products) Software Development: RE: Mitydsp Pro compile and link errors
- CHIP_6711 was removed from the compiler predefined variables. The build produces the same errors.
CHIP_6455 was adde... - 06:48 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP Hello World error message
- Hi:
I'm getting the same assertions. I re-flashed the kernel and the file system on the board with the latest ima... - 01:39 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO Output immediately after power on
- The only way I know of is to use stronger pull downs (1 or 2K I think) externally. You'll burn a bit more power and ...
- 12:51 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO Output immediately after power on
- Ohh, OK.
I found a way at Ti's support page how to change the UBL to set the defaultstate of the PUPDSEL-registers... - 12:14 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO Output immediately after power on
- Keep in mind that the OMAP-L138 also has built in pull-up and pull-down resistors on just about every pin.
On rese... - 12:02 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO Output immediately after power on
- Tim,
thanks for the fast reply!
The following Pins on the L138 (no FPGA-Version)SoM are driven at the beginning... - 11:34 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO Output immediately after power on
- Christian,
there are 2 possibilities for where pins are being enabled and potentially toggled. A lot of this depends... - Hi,
Does anybody know where it comes from, that i get immediately a signal on some pins after the module is powere...
06/18/2013
- 08:50 PM MityDSP (TI TMS320C6xxx Based Products) Software Development: RE: Mitydsp Pro compile and link errors
- Hmm.
We'll look some more tomorrow, but the '--define="CHIP_6711"' option to the compiler should not be set for th... - Downloaded MityDSP 2.12 and installed.
Using CCSv5.1.0.09.
Imported C:\MityDSP\2.12\software\demo\CCSV5\UDP_echo pr...
06/14/2013
- 06:52 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSPHelloWorld won't compile
- I don't see any errors in the console.txt. Maybe eclipse has something cached and is showing errors that aren't curr...
- 06:15 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSPHelloWorld won't compile
- To Dave Stehlik: Most of the errors disappeared when I fixed the error in the Message() functio, but I am still left...
- 06:08 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSPHelloWorld won't compile
- I'm replying to my own post - I found a problem with the lpMessageOutbound->SendMessage function. When I changed the...
- 06:03 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSPHelloWorld won't compile
- Hello Steven,
I am going to assume that you have an error indicating that it can't locate an include file,
say st... - 05:51 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: can't detect USB2.0 device
- Not sure why the 3.2 kernel is causing problems for you. It could be that you need to recompile our 3.2 kernel branc...
- 05:47 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP Hello World error message
- Sorry for the delay.
I have seen these messages before, but we have several applications that do not exhibit this ... - 05:45 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: omap driver & rs485
- The omap driver is modified for the MityARM-3359 (the AM335X SOC chips). This patch actually came from support of ou...
- 04:35 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Issues programming FPGA using Linux driver
- Thanks for the quick reply!
I am indeed using a BIN file. It is entirely possible that it is not bit-swapped, it was... - 03:57 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: Issues programming FPGA using Linux driver
- If you are not using the framework, the state sysfs value will report FAIL (I think it is checking the version of the...
- I am trying to program the LX45 FPGA on my MityDsp board using the fpga_ctrl.ko driver but don't have much luck.
Eve...
06/13/2013
- I am trying to compile the ARM part of DSPHelloWorld in Eclipse. Compile of arm_main is failing for really basic stu...
- Hi,
I've some questions about your patch from this link : http://support.criticallink.com/redmine/projects/armc8-p...
06/12/2013
- 02:15 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: SATA disk can‘t be linked when booting the linux kernel (Using industrial board)
- Thanks for answering me so quickly, the S/N number of my MITY-AM1808 is: 121470. I will also try some other sata disk...
06/11/2013
- 08:02 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP vs NEON for Floating point
- Sorry, my bad. I see it now. The first time I tried the SDK it didn't work as I didn't install the whole 4GB of stuff...
- 07:28 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP vs NEON for Floating point
- Hello Conor,
On the DVSDK, the examples in c6run include a "hello world" (ti-dvsdk_omapl138-evm_04_03_00_06/c6run_... - 06:26 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP vs NEON for Floating point
- Just in addition - it would kinda cool to have a "Hello world" done using the TI DVDSK as it has the command line DSP...
- 07:37 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: SATA link down
- Just following up, are you still having problems?
-Mike
- 06:32 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: SATA disk can‘t be linked when booting the linux kernel (Using industrial board)
- Hello,
Thank you for your post. I have not heard back from yilan wang, and I was assuming that his issue was reso... - When I use industrial board 000268RI-2B and mityARM-1808 to do some development, I'v meet the same problem with "yili...
06/10/2013
- 11:12 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Noise on the Can Bus Interface
- Hi Jeremy,
Sorry we didn't respond right away. We were trying to find someone to look at the issue and set someth... - 11:06 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Noise on the Can Bus Interface
- I figured out where the dropped frames were going. It appears the noise is being sufficiently taken care of when the ...
06/07/2013
- When (in the DSP Hello World) the arm calls ldDspApp0>StopApp(), I receive an error message (at the bottom of this po...
06/06/2013
- 04:41 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Warning messages when running DSP Hello World
- I'm getting the same thing...
- 04:29 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP vs NEON for Floating point
- Digikey is open but managers' pockets are closed most of the time!
My circuit design is in flux still but I'm at t... - 11:39 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP vs NEON for Floating point
- Digikey is open 24 hours a day!
Do you have a lot of interfaces to rework if you retarget your module?
-Mike
... - 11:28 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP vs NEON for Floating point
- Thank you for that Mike. I'm trying to figure out is it worth the pain of learning the DSP toolsets and dealing with ...
- 09:47 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP vs NEON for Floating point
- The DSP floating point performance is *very good* compared to the ARM9. It's actually faster (when coded right) than...
- Dear Critical Link,
Now that you have newer modules in Cortex A8 and Dual A9 versions, I have a question as regard... - I have measured a significant 500kHz noise burst on the CAN bus pins of the Industrial IO board. the reason for check...
06/05/2013
- 01:08 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- Okay, I had wiring problem. candump now dumps the received frames to the console. So we are up and running. thanks fo...
- 12:33 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- Can you dump out the exact commands you used?
Thanks. (I am not a CAN expert, but I can try to track down the eng... - 12:27 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- Well, Although the kernel now sees the CAN controller the ifconfig -a reads all zeros for everything even after I app...
- 11:26 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- I applied the patch to the 3.2 kernel and it is now up and running. I will now check the the functionality with the c...
- 11:00 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- I am dead in the water at the moment. I will try the patch set on the 3.2 kernel and let you know how it goes.
- 10:23 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- Hello,
I've pushed a "patch set":http://support.criticallink.com/gitweb/?p=linux-davinci.git;a=commit;h=c008e4e8bb... - 07:31 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- Hello Mr. Young,
I have reproduced the issue here. There are some patches that never made it to our external git ...
06/04/2013
- 01:51 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- The only other thing is I have your rs485 converter card plugged into the expansion port for UART2
- 01:44 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- The revision # is 80-000268RI-2B
I downloaded the latest release today and compiled the kernel with out the audio ... - 01:35 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- Can you please send me the revision of the board you are working with (there should be an 80- number somewhere on the...
- 01:01 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- It is just the eth0 and lo entries. there is no can0 entry. the probe fails on boot up.
- 12:07 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- Can you dump the text of "ifconfig -a"?
-Mike - 12:06 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can Interface won't probe
- In case it is important I am using the Am1810 with the industrial IO board. I have tried both Linux branches and they...
Also available in: Atom
Go to top
