Connector Information¶

The MitySOM-A10S utilizes 2 connectors on the bottom of the module. The mating connectors are described below.

Critical Link has used following connector(s)¶

Manufacturer	Part Number
Hirose Electric Co LTD	FX10A-144P-SV1

The FX10A-144P-SV1 corresponds with J202 from the MitySOM A10S Development Board.

Manufacturer	Part Number
Samtec Inc.	SEAF-40-06.5-L-08-1-A-K-TR)

The SEAF-40-06.5-L-08-1-A-K-TR) corresponds with J201 from the MitySOM A10S Development Board.

Interposer Manufacturer	Part Number
Hirose Electric Co LTD	FX10_CL0608-0009-5-03_2d

The FX10_CL0608-0009-5-03_2d is the interposer board that we used and recommend to use.

• Note all mating connectors were used with a four 6mm standoffs and 6mm screws to go along with it.
  Here are the parts we recommend:

Manufacturer	Part Number
Lyn-Tron, Inc	AA5083-3050-10.0-00

The AA5083-3050-10.0-00 are the standoff parts.

Manufacturer	Part Number
McMaster-Carr	92000A116

The 92000A116 part are the screws that we used.

Please contact your Critical Link account representative for further assistance in confirming compatibility of any connector.