MitySOM-AM57X Texas Instruments AM57XX SOC Wiki Page¶

• Table of contents
• MitySOM-AM57X Texas Instruments AM57XX SOC Wiki Page
• Repositories
• Development Kit
  • Pre-Built Images
  • Build Flow
• Software
  • U-Boot
  • Linux Operating System
• FPGA / VHDL
• Multi-Core Support
• Hardware Design
• Frequently Asked Questions
• Reference Material
• Recent Updates:

Support is included for the MitySOM-AM57X. See The Critical Link website for top level summaries of this platform.

• MitySOM-AM57X DataSheet [pdf]
• MitySOM-AM57X Dev Board DataSheet [pdf]: Please contact Critical Link
• MitySOM-AM57X Carrier Board Design Guide: Please contact Critical Link

Errata and Product Change Notifications for the MitySOM-AM57X can be found in the Hardware Design section of this wiki.

Repositories¶

The following are links to the repositories that Critical Link provides for the kernel, U-Boot, Yocto, and FPGA sample project.

Type	Repo	Branch
Kernel	https://support.criticallink.com/gitweb/?p=processor-sdk-linux.git;a=summary	mitysom-linux-4.19
U-Boot	https://support.criticallink.com/gitweb/?p=processor-sdk-u-boot.git;a=summary	processor-sdk-u-boot-2019.01
Yocto Layer	https://support.criticallink.com/gitweb/?p=meta-mitysom.git;a=summary	thud
Example FPGA Projects	https://support.criticallink.com/gitweb/?p=mitysom-am57x-ref.git;a=summary	main

Development Kit¶

Pre-Built Images¶

The following is a link to pre-built binaries for the development SD card image for the SOM variants. This will work with the FPGA or non-FPGA variants. It includes the preloader, uboot, and root filesystem.

Note: SD-Card Image requires a 16GB+ sd card.

Description	Location
Reference Micro-SD card Image	tisdk-rootfs-image
Reference Linux Developer Toolchain (based on TI's AM57xx PROCESSOR-SDK-LINUX)	arago-2019.11-armv7a-linux-gnueabi-tisdk.sh

For flashing the Micro-SD card, we recommend using balenaEtcher .

Build Flow¶

• Docker build environment
• U-Boot Building for MitySOM-AM57X
• Building the Yocto Root Filesystem for MitySOM-AM57X
• Building the Linux Kernel for MitySOM-AM57X
• Building Vivado Example Projects for MitySOM-AM57X
• Building DSP Example Projects

Software¶

• Linux Build Environment
• JTAG Debug Interface
• SoM Temperature Sensors
• DSP JTAG Debug via CCS

U-Boot¶

• U-Boot_Setup Pinmux
• Programming the FPGA Through U-Boot
• Accessing FPGA Peripherals

Linux Operating System¶

• Using Gpio
• Using spidev
• Reading Temperature
• Setting Static IP Address
• Setting up RNDIS

FPGA / VHDL¶

• FPGA Overview
• FPGA Example Projects
• AM57xx FPGA Communication

Multi-Core Support¶

• Change Core Clock Frequency
• Memory Overview

Hardware Design¶

• Errata and Module Product Change Notifications
• Power Supply and Heat Dissipation
• Mounting Hole Locations
• Shock and Vibration
• Hardware Design Guidelines
• CAD Files and Information
• Clearance Beneath Module
• On-Module Trace Lengths
• MXM Connector Information
• Setup Pinmux
• MitySOM-AM57X Pin-Out Spreadsheet

Frequently Asked Questions¶

• ARM Software FAQs
• FPGA FAQs
• Hardware FAQs
• Misc. FAQs

Reference Material¶

A large portion of the software has been developed using information from the sites listed below:

• Yocto Project
• TI Processor SDK

Recent Updates:¶

Updated 11 months ago by John Pruitt